journal article·2024-12

Quantification of nanoscale precipitation in AA7050 using X-ray scattering, electron microscopy and automated particle counting techniques

Alyssa Stubbers, Ning Zhu, Jillian J. Cramer, Timothy J. Eden, Anthony J. Naccarelli, Luke N. Brewer, T. John Balk

Publisher page

Abstract

Material strength is dependent on several factors, including precipitation strengthening, which is the main strengthening mechanism in AA7050 aluminum alloys. These alloys contain numerous nanometer-scale precipitates that occur throughout grains and along grain boundaries when subjected to a range of heat treatment conditions. In this study, three different characterization methods were used to characterize these nanoscale precipitates: conventional scanning transmission electron microscopy (STEM); laboratory-based small-angle X-ray scattering (SAXS); and a new software analysis tool developed by Thermo Fisher Scientific: automated particle workflow (APW). Each method was used to determine average precipitate size and volume fraction of precipitation in AA7050-T7451 specimens with variable post-T7 heat treatment procedures. STEM techniques measured the average particle size as ranging from 7.6 to 17.6 nm, compared to 6.3–10.7 nm for SAXS, and 7.4–10.8 nm for APW. Volume fraction determinations varied from 0.23 to 16 %, depending on method, and were the most difficult to quantify. Significant outcomes of the current study are that SAXS and APW are the most accurate methods for determining average particle size and that future work is needed to effectively analyze precipitate volume fraction.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Bauxite Residue and Utilization · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Characterization of precipitates size distribution: validation of low-voltage STEM10.1111/j.1365-2818.2008.02082.x ↗
2. A STEM study of the effect of precipitation on grain boundary chemistry in AISI 304 steel10.1016/0956-7151(91)90313-P ↗
3. Nano-scale precipitation and phase growth in mg-Gd binary alloy: an atomic-scale investigation using HAADF-STEM10.1016/j.matdes.2017.10.042 ↗
4. Precipitation in an Al-Zn-mg-cu alloy during isothermal aging: atomic-scale HAADF-STEM investigation10.1016/j.msea.2017.03.032 ↗
5. HAADF-STEM study of phase separation and the subsequent α phase precipitation in a β-Ti alloy10.1016/j.scriptamat.2015.09.007 ↗
6. Characterization of microstructural and precipitates evolution in cold sprayed AA7050 after in situ laser heat treatment10.1016/j.surfcoat.2023.129491 ↗
7. Controlled nanoscale precipitation to enhance the mechanical and biological performances of a metastable β Ti-Nb-Sn alloy for orthopedic applications10.1016/j.matdes.2017.04.014 ↗
8. Study of retained austenite and nano-scale precipitation and their effects on properties of a low alloyed multi-phase steel by the two-step intercritical treatment10.1016/j.matchar.2016.01.009 ↗
9. Quantitative evaluation of precipitates in an Al–Zn–mg–cu alloy after isothermal aging10.1016/j.matchar.2005.10.004 ↗
10. Quantitative study of nanoscale precipitates in Al–Zn–mg–cu alloys with different chemical compositions10.1016/j.msea.2015.04.104 ↗
11. An in situ usaxs–saxs–waxs study of precipitate size distribution evolution in a model ni-based alloy10.1107/S1600576717006446 ↗
12. A comparative study of primary Al precipitation in amorphous Al87Ni7La5Zr by means of WAXS, SAXS, TEM and DSC techniques10.1016/j.actamat.2004.07.005 ↗
13. Automating nanoparticle analysis10.1016/S0026-0657(21)00281-2 ↗
14. Analysis of precipitate density of an aluminium alloy by TEM and AFM, REM
15. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
16. Aluminum alloy Nomenclatutre and temper designations
17. On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy10.1016/S0921-5093(03)00145-X ↗
18. Pérez · 2013 · vol. 1
19. The role of Nanocartography in the development of automated TEM10.1017/S1431927621010382 ↗
20. Automated and autonomous experiments in electron and scanning probe microscopy
21. Girardot · 2011
22. Mahe · 2016 · vol. Version E
23. Feigin · 1987 · vol. 1
24. Determination of the regularization parameter in indirect-transform methods using perceptual criteria10.1107/S0021889892001663 ↗
25. Everything SAXS: small-angle scattering pattern collection and correction10.1088/0953-8984/25/38/383201 ↗
26. SAXS and TEM quantitative analysis of plate-like precipitates in Ti-added low-carbon steel10.2355/isijinternational.ISIJINT-2020-058 ↗
27. An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy10.1016/j.actamat.2019.05.041 ↗
28. Form-free size distributions from complementary stereological TEM/SAXS on precipitates in a mg–Zn alloy10.1016/j.actamat.2013.11.029 ↗
29. Zhu · 2022
30. Probing surface and interface morphology with grazing incidence small angle X-ray scattering10.1016/j.surfrep.2009.07.002 ↗
31. Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour10.1179/026708304225016662 ↗
32. Temporal evolution of coherent precipitates in an aluminum alloy W319: a correlative anisotropic small angle X-ray scattering, transmission electron microscopy and atom-probe tomography study10.1016/j.actamat.2016.06.043 ↗
33. Characterisation of the composition and volume fraction of η’ and η precipitates in an Al–Zn–mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
34. Complementarity of atom probe, small angle scattering and differential scanning calorimetry for the study of precipitation in aluminium alloys
35. Nanocrystalline materials: synthesis, characterization, properties, and applications10.3390/cryst11111317 ↗
36. A short review on mechanical behavior of nanocrystalline materials10.35840/2631-5076/9208 ↗