Novel Ti–Zr–Co–Cu–M (M = Sn, V, Al) amorphous/nanocrystalline brazing fillers for joining Ti–6Al–4V alloy
Source abstract
Abstract
Novel Ti 50Zr 30Co 11Cu 6M 3 (M = Sn, V, Al) amorphous/nanocrystalline alloys with low liquidus temperatures of 1145 K – 1171 K were developed as the brazing filler metals for enhancing the mechanical properties of titanium alloy brazed joints. The Ti–6Al–4V (TC4) joints brazed with these novel Ti-based alloy ribbons at 1233 K for 900 s exhibited typical Widmanstätten structure composed of α-Ti and β-Ti, as well as sporadic ultrafine intermetallic compounds. Among these joints, the TC4/Ti–Zr–Co–Cu–Sn/TC4 joint exhibited relatively low tensile shear strength and impact toughness of 461 MPa and 2.6 J/cm 2, respectively, due to the concentrated segregation of element Sn in the center of the braze zone. By contrast, the joints brazed with the novel Ti–Zr–Co–Cu–V(Al) fillers showed much improved mechanical properties. The tensile shear strength and impact toughness of the TC4/Ti–Zr–Co–Cu–Al/TC4 joint were enhanced up to 546 MPa and 4.2 J/cm 2, respectively, suggesting that the present Ti–Zr–Co–Cu–Al amorphous/nanocrystalline filler is a promising brazing material practically applied for joining titanium alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. The design of a new Ti–Zr–Cu–Ni–Ag brazing filler metal for brazing of titanium alloys10.1007/s40194-021-01181-5 ↗
2. Opportunities and issues in the application of titanium alloys for aerospace components10.3390/met10060705 ↗
3. Effect of brazing temperatures on microstructure and properties of TC4/Ti57Zr13Cu21Ni9/316L10.1051/metal/2021099 ↗
4. State of the art of titanium-based brazing filler metals
5. Performance comparison of Al-Si-Ti and Co-Si-V-Ti braze alloys in the vacuum brazing of reaction-bonded silicon carbide10.1007/s40194-019-00796-z ↗
6. A multicomponent TiZr-based amorphous brazing filler metal for high-strength joining of titanium alloy10.1016/j.scriptamat.2016.02.006 ↗
7. Production and application of rapidly quenched brazing alloys10.1533/wint.2006.3639 ↗
8. Interfacial microstructure and shear strength of TC4 alloy joints vacuum brazed with Ti–Zr–Ni–Cu filler metal10.1016/j.msea.2020.138990 ↗
9. Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy10.1007/s12598-020-01424-2 ↗
10. A Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous filler metal for improving the strength of Ti–6Al–4V alloy brazing joint10.1016/j.pnsc.2017.09.005 ↗
11. Suryanarayana · 2010
12. Microstructure evolution and brazing mechanism of Ti5Si3/Ti3Al composite and Ni-based superalloy joints using Ti–Zr–Cu–Ni filler alloy10.1016/j.msea.2017.12.049 ↗
13. Analysis of the microstructure and mechanical properties of TiBw/Ti-6Al-4V Ti matrix composite joint fabricated using TiCuNiZr amorphous brazing filler metal10.3390/ma14040875 ↗
14. Confusion by design10.1038/366303a0 ↗
15. Lütjering · 2007
16. Brazing with amorphous foil preforms
17. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
18. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
19. Development of high Bs FeNiBSiNb bulk metallic glasses by using combined CALPHAD and experimental approaches10.1016/j.jnoncrysol.2020.120108 ↗
20. Thermodynamic evaluation and experimental verification of the glass forming ability of Cu-Zr-based alloys10.1016/j.jnoncrysol.2021.120835 ↗
21. High strength bulk amorphous alloys with low critical cooling rates (overview)10.2320/matertrans1989.36.866 ↗
22. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
23. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
24. Formation and crystallization behavior of Fe-based amorphous precursors with pre-existing α-Fe nanoparticles—structure and magnetic properties of high-Cu-content Fe-Si-B-Cu-Nb nanocrystalline alloys10.1016/j.jmst.2020.05.049 ↗
25. Correlation of glass-forming ability to thermal properties in Ti-based bulk metallic glasses10.1016/j.jallcom.2012.07.037 ↗
26. Baker · 1992 · vol. 3
27. Vander Voort · 2004 · vol. 9
28. Influence of interfacial intermetallic compound on fracture behavior of solder joints10.1016/S0921-5093(03)00277-6 ↗
29. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing10.1016/j.jallcom.2004.07.057 ↗
30. Simulation on Ti-based filler and vacuum brazing for TA15 alloy10.1007/s40194-020-00909-z ↗
31. Design TiZrCuNi filler materials for vacuum brazing TA15 alloy
32. Microstructures and mechanical properties of vacuum brazed Ti3Al/TiAl joints using two Ti-based filler metals10.1016/j.jmst.2015.11.018 ↗
33. Diffusion of copper, silver and gold in α-titanium10.1080/01418619508243935 ↗
34. Measurement of diffusion coefficients in the bcc phase of the Ti–Sn and Zr–Sn binary systems10.1007/s11661-018-05107-7 ↗
35. Diffusion of aluminum in β-titanium10.2320/matertrans.M2010225 ↗
36. Microstructural, mechanical and fractographical study of titanium-CP and Ti–6Al–4V similar brazing with Ti-based filler10.1016/j.msea.2012.08.043 ↗
37. Infrared brazing of Ti–6Al–4V using the Ti–15Cu–15Ni braze alloy10.1007/s10853-006-5242-7 ↗
38. New Ti–Zr–Cu–Ni–La system brazing filler metals for the joining of titanium alloy
39. Increasing Ti–6Al–4V brazed joint strength equal to the base metal by Ti and Zr amorphous filler alloys10.1016/j.matchar.2012.05.016 ↗