journal article·2011-03

Macroporous glass monoliths prepared from powdered niobium phosphate glass by fast sintering

Vitor Lacerda Mauricio, Oswaldo Luiz Alves, Italo Odone Mazali

Materials Characterization· Volume 62· Issue 3
Publisher page

Abstract

Macroporous monoliths were prepared by very fast sintering (between 3 and 15 min) of niobophosphate glass powders at low temperature (1018 K) using cellulose as a foaming agent. The porous materials were analyzed by thermal analysis, Raman spectroscopy, scanning electron microscopy and powder X-ray diffraction, and further investigated using X-ray microtomography, a non-destructive technique capable of reconstructing three-dimensional models of samples and providing structural measurements. The progression of the porosity of the monoliths depends on the sintering time (3 to 15 min) and the amount (up to 50% in mass) of cellulose used. The macroporous glass monoliths may find application in integrated chemical systems and in filtering processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Bone Tissue Engineering Materials · Mesoporous Materials and Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Permeability of ceramic membranes to gas flow10.4028/www.scientific.net/MSF.299-300.19 ↗
2. Theory of pressure-driven transport of neutral solutes and ions in porous ceramic nanofiltration membranes10.1016/S0376-7388(99)00081-2 ↗
3. Role of backpulsing in fouling minimization in crossflow filtration with ceramic membranes10.1016/S0376-7388(00)00663-3 ↗
4. Photochemistry in the adsorbed layer. V. Effects of surface pretreatments upon the photolysis of adsorbed 2-pentanone10.1246/bcsj.48.2663 ↗
5. Photoluminescence and photocatalytic activity of highly dispersed titanium oxide anchored onto porous Vycor glass10.1021/j100269a025 ↗
6. Photocatalytic degradation of 1-octanol on anchored titanium oxide and on TiO2 powder catalysts10.1006/jcat.1996.0010 ↗
7. Immobilization of iron porphyrins into porous Vycor glass: characterization and study of catalytic activity10.1016/S1381-1169(02)00025-0 ↗
8. Chiral catalysts confined in porous hosts: 2. Catalysis10.1016/S0021-9517(02)00155-0 ↗
9. Bioceramics: tendencies and perspectives of an interdisciplinary area10.1590/S0100-40422000000400015 ↗
10. Periodic macroporous hydroxyapatite-containing calcium phosphates10.1021/cm020259b ↗
11. Bard · 1994
12. Construction and evaluation of an optical pH sensor based on polyaniline–porous Vycor glass nanocomposite10.1016/S0925-4005(00)00726-7 ↗
13. Porous glass-ceramics with skeleton of two-dimensional layered crystal Ti(HPO4)2.2H2O10.1016/S0022-3093(05)80809-9 ↗
14. Ducheyne P, El-Ghannam A, Shapiro I, US5676720-A 1997.
15. Preparation of porous ceramics from industrial waste silica mineral10.1007/BF01910079 ↗
16. Macroporous calcium phosphate glass-ceramic prepared by two-step pressing technique and using sucrose as a pore former10.1007/s10856-005-2611-8 ↗
17. Manufacturing of porous niobium phosphate glasses10.1016/j.jnoncrysol.2006.03.104 ↗
18. Preparation and characterization of new niobophosphate glasses in the Li2O–Nb2O5–CaO–P2O5 system10.1023/B:JMSC.0000017760.85512.60 ↗
19. On the application of X-ray microtomography in the field of materials science10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
20. Different methods to synthesize ceramic foams10.1016/j.jeurceramsoc.2008.07.039 ↗
21. Validation of X-ray microfocus computed tomography as an imaging tool for porous structures10.1063/1.2838584 ↗
22. Practical cone-beam algorithm10.1364/JOSAA.1.000612 ↗
23. Porous glass-ceramic of α-NbPO5 skeleton with three-dimensional network structure10.1023/A:1013716112689 ↗