Precracking Structures in a Creep-Ruptured Low-Carbon Cr-Mo Steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Creep-fracture initiation in 2case14%Cr-1%Mo steel10.1179/030634576790431435 ↗
2. The effect of temperature and microstructure on the creep damage found in low alloy ferritic steels10.1007/BF02652245 ↗
3. The effect of temperatures and carbon content on the cavitation behaviour of a 1.5% pct Cr-0.5 pct V steel10.1007/BF02646404 ↗
4. Correlation between rupture ductility and cavitation in Cr-Mo-V Steels
5. Intergranular cavity damage and creep fracture of 1Cr-0.5Mo steels10.1179/mst.1986.2.4.368 ↗
6. Application of structural surface examination for the rating of power plant components subjected to creep stress
7. Mechanistic control regimes for intergranulary cavity growth in 2.25Cr-1Mo steel in various stresses and stress states10.1179/030634581790426796 ↗
8. The growth of creep cavities in low-alloy steel10.1007/BF02647829 ↗
9. Effects of metallographic preparation procedures on creep damage assessment10.1016/1044-5803(92)90030-L ↗
10. B.H. Neubauer and U. Wedel, Restlife estimation of creeping components by means of replicas, in ASME International Conference on Advances in Life Prediction Methods, D.A. Woodford and J.R. Whitehead (eds.), ASME, New York (1983) pp. 307–366.
11. B.J. Cane and R.D. Townsend, Prediction of remaining life in low-alloy steels, in Flow and Fracture at Elevated Temperatures, R. Raj (ed.), American Society for Metals, Metals Park, OH (1985), pp. 279–315.
12. M.S. Shammas, Predicting the remnant life of 1Crcase12Mo coarse-grained heat affected zone material by quantitative cavitation measurements, in Central Electricity Generating Board Report TPRD/L/3199/R87, Leatherhead (1987).
13. L.E. Samuels, Metallographic Polishing by Mechanical Methods, 3rd ed. American Society for Metals, Metals Park, OH (1984).
14. The nature of industrially polished surfaces of metals
15. The nature of mechanically polished surfaces of copper10.1016/0026-0800(81)90001-X ↗
16. Effects of type and size of diamond abrasive on material removal rates in metallographic polishing10.1016/0026-0800(84)90003-X ↗
17. The nature of mechanically polished surfaces of copper; polishing with fine diamond abrasives10.1016/0026-0800(85)90059-X ↗
18. Abrasive damage to graphitic flakes in cast iron
19. L.E. Samuels, Polishing wear, in ASM Handbook: Friction, Lubrication and Wear Technology, Vol. 18, P. Blau (ed.), ASM International, Materials Park, OH (1992), pp. 191–198.
20. J. Miller, Slurry erosion, in ASM Handbook: Friction and Wear Technology, Vol. 18, P. Blau (ed.), ASM International, OH (1992).
21. G.F. Vander Voort, Metallography. Principles and Practice, McGraw Hill, New York (1984).10.31399/asm.tb.mpp.9781627082600 ↗
22. Cavity nucleation and growth in a 1%Cr 0.5%Mo steel10.1016/0025-5416(87)90500-3 ↗
23. Intergranular creep-cavity formation in low-alloy bainitic steels10.1179/030634581790426831 ↗
24. H. Reidel, creep crack growth, in Flow and Fracture at Elevated Temperatures, R. Raj (ed.), American Society for Metals, Metals Park, OH (1985), pp. 149–177.
25. B.F. Dyson, A unifying view of the kinetics of creep cavity growth, in Creep of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen (eds.), Pineridge Press (1981), pp. 235–247.
26. G. Ghandhi, Fracture mechanism maps for metals and alloys, in Flow and Fracture at Elevated Temperatures, R. Raj (ed.), American Society for Metals, Metals Park, OH (1985), pp. 83–119.
27. Fracture mechanisms in pure iron, two austenitic steels, and one ferritic steel10.1007/BF02660638 ↗
28. S.D. Mann, Creep-fatigue interactions in a low-alloy steel, Master of Engineering Science thesis, Department of Materials Engineering, Monash University, Melbourne, Australia (1988).