journal article·2015-03

Performance of blended ash geopolymer concrete at elevated temperatures

M. W. Hussin, M. A. R. Bhutta, M. Azreen, P. J. Ramadhansyah, J. Mirza

Materials and Structures· Volume 48· Issue 3
Publisher page

Abstract

This study involved laboratory investigation of the performance of blended ash geopolymer concrete at elevated temperatures. Geopolymer concrete composite was prepared using blended ash, pulverized fuel ash, and palm oil fuel ash, obtained from agro-industrial waste along with alkaline activators. The samples were heated up to 800 °C to evaluate mass loss, strength, and microstructural changes due to thermal impact. Ordinary Portland cement (OPC) concrete was prepared as control concrete. The deterioration of concrete at elevated temperatures was examined by X-ray diffraction, fourier transformed infrared spectrometer, thermogravimetry analyser and field emission scanning electron microscope. A comparison between the performance of geopolymer and OPC concretes—the former exhibited better performance at elevated temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Davidovits J (1994) NASTS Award 1994. J Mater Educ 16:1–25
2. Davidovits J, Davidovics M, Balaguru PN, Foden A, Sorathia U, Lyon RE (1996) Fire response of geopolymer structural composites In: Proceedings of the 1st international conference on fiber composite in infrastructures (ICCI96). Department Civil Engineering, University of Arizona, Tucson, pp 972–981
3. El H, Seleem DH, Rashad AM, Elsokary T (2011) Effect of elevated temperature on physico-mechanical properties of blended cement concrete. Constr Build Mater 25(2):1009–101710.1016/j.conbuildmat.2010.06.078 ↗
4. Rashad AM, Zeedan SR (2012) A preliminary study of blended pastes of cement and quartz powder under the effect of elevated temperature. Constr Build Mater 29:672–68110.1016/j.conbuildmat.2011.10.006 ↗
5. Krivenko PV, Kovalchuk GYu (2007) Directed synthesis of alkaline aluminosilicate minerals in a geocement matrix. J Mater Sci 42:2944–295210.1007/s10853-006-0528-3 ↗
6. Rashad AM, Zeedan SR (2011) The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load. Constr Build Mater 25(7):3098–310710.1016/j.conbuildmat.2010.12.044 ↗
7. Bakharev T (2006) Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing. Cem Concr Res 36(6):1134–114710.1016/j.cemconres.2006.03.022 ↗
8. Mohd Ariffin MA, Hussin MW, Rafique Bhutta MA (2011) Mix design and compressive strength of geopolymer concrete containing blended ash from agro-industrial wastes. Adv Mater Res 339:452–45710.4028/www.scientific.net/AMR.339.452 ↗
9. Davidovits J (1991) Geopolymers: inorganic polymeric new materials. J Therm Anal 37:1633–165610.1007/BF01912193 ↗
10. Rashad AM, Bai Y, Basheer PAM, Collier NC, Milestone NB (2012) Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature. Cem Concr Res 42(2):333–34310.1016/j.cemconres.2011.10.007 ↗
11. Morsy MS, Abbas H, Alsayed SH (2012) Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures. Constr Build Mater 35:900–90510.1016/j.conbuildmat.2012.04.099 ↗
12. Jiao X, Zhang Y, Chen T (2013) Thermal stability of a silica-rich vanadium tailing based geopolymer. Constr Build Mater 38:43–4710.1016/j.conbuildmat.2012.06.076 ↗
13. Palomo A, Ferna A (2005) Mid-infrared spectroscopic studies of alkali-activated fly ash structure. Microporous and Mesoporous Mater 86:207–21410.1016/j.micromeso.2005.05.057 ↗
14. Lee WKW, van Deventer JSJ (2007) Chemical interactions between siliceous aggregates and low-Ca alkali-activated cements. Cem Concr Res 37(6):844–85510.1016/j.cemconres.2007.03.012 ↗
15. Villa C, Pecina ET, Torres R, Gómez L (2010) Geopolymer synthesis using alkaline activation of natural zeolite. Constr Build Mater 24(11):2084–209010.1016/j.conbuildmat.2010.04.052 ↗
16. Tchakoute Kouamo H, Elimbi A, Mbey JA, Ngally Sabouang CJ, Njopwouo D (2012) The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: a comparative study. Constr Build Mater 35:960–96910.1016/j.conbuildmat.2012.04.023 ↗
17. Ahmari S, Ren X, Toufigh V, Zhang L (2012) Production of geopolymeric binder from blended waste concrete powder and fly ash. Constr Build Mater 35:718–72910.1016/j.conbuildmat.2012.04.044 ↗
18. Kong DLY, Sanjayan JG (2010) Cement and concrete research effect of elevated temperatures on geopolymer paste, mortar and concrete. Cem Concr Res 40(2):334–33910.1016/j.cemconres.2009.10.017 ↗
19. Rodríguez ED, Bernal SA, Provis JL, Paya J, Monzo JM, Borrachero MV (2013) Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder, Cem Concr Compos 35:1–1110.1016/j.cemconcomp.2012.08.025 ↗
20. Djaknoun S, Ouedraogo E, Benyahia AA (2012) Characterisation of the behaviour of high performance mortar subjected to high temperatures. Constr Build Mater 28(1):176–18610.1016/j.conbuildmat.2011.07.063 ↗
21. Gadsden JA (1975) Infrared spectra of mineralsand related inorganic compounds. Butterworths, London
22. Farmer VC (1974) The Infrared spectra of minerals. Bartholomew Press, London10.1180/mono-4 ↗
23. Ruiz-Santaquiteria C, Skibsted J, Fernández-Jiménez A, Palomo A (2012) Alkaline solution/binder ratio as a determining factor in the alkaline activation of aluminosilicates. Cem Concr Res 42(9):1242–125110.1016/j.cemconres.2012.05.019 ↗