Microstructure and heavy metal adsorption mechanisms of hydrothermally synthesized Al-substituted tobermorite
Source abstract
Abstract
Due to the properties of tobermorite as a cation exchanger and its potential applications in catalysis, and in hazardous waste disposal, attention has been drawn to the properties of tobermorite. In this study, fresh calcium oxide (CaO), fumed silica powder (SiO2) and aluminum nitrate nonahydrate (Al(NO3)3·9H2O) were used for synthesizing tobermorite with/without aluminum. The suitable synthesis condition was confirmed as 5 h in an autoclave at 180 °C and saturation vapor pressure around 1 MPa, marked as samples T and TA, respectively. The BET surface areas of T and TA were 198.83 and 80.48 m2/g, respectively. The pore sizes were mainly distributed between 100 and 300 nm, and pore volume of TA significantly lower than T. Laser scattering particle analysis indicated that the particle size of T and TA were both distributed between 1 and 100 μm, and the median diameter was 27.41 and 19.44 μm, respectively. These results indicated that the aluminum refined pore structure and particle size. The adsorption effectiveness was affected by adsorbent contents and adsorption time. For both of T and TA, the adsorption effectiveness of Cr6+, Pb2+, and Cu2+ could be higher than 97.62. 96.4, and 94.13%, respectively. The residues after adsorption were further studied by XRD, ATR-IR, and SEM. The results of XRD and ATR-IR showed that there was no other significant phase and functional group, except hydrocerussite (Pb3(CO3)2(OH)2) in T–Pb residue. The results indicate that the uptake of heavy metals (Cr6+, Pb2+, and Cu2+) by T or TA mainly through two ways which are surface complexation and uptake in the interlayer. SEM showed TA has better structural stability with the uptake of heavy metals than T. It indicated that chemical effects were the dominant factor, and physical effect took second place.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Clay minerals and soil interactions · Bauxite Residue and Utilization · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Wang LK, Chen JP, Shammas NK (2009) Heavy metals in the environment. CRC Press, New York10.1201/9781420073195 ↗
2. Ghniwa M, Volesky NB (2009) Toxicity and sources of Pb, Cd, Hg, Cr, As and radionuclides in the environment. CRC Press, New York
3. Salomons W, Forster U, Mader P (1995) Heavy metals, problem and solution. Springer, Berlin
4. Roy DM (1992) Cementitious materials in nuclear waste management. In: Proceedings of the 9th international congress on the chemistry of cement, vol 6. National Council for Cement and Building Materials, NCB, New Delhi, pp 88–113
5. Astrup T, Mosbaek H, Christensen TH (2006) Assessment of long-term leaching from waste incineration air-pollution-control residues. Waste Manag 26(8):803–81410.1016/j.wasman.2005.12.008 ↗
6. Stephan D, Knöfel D, Härdtl R (2003) Influence of heavy metals on the properties of cement and concrete-binding mechanisms and fixation. In: Proceedings of the 11th international congress on the chemistry of cement ‘‘cement’s contribution on the development in the 21st century’’, Durban, South Africa, vol 5, pp 2178–2187
7. van Jaarsveld JGS, van Deventer JSJ, Lorenzen L (1999) The potential use of geopolymeric materials to immobilize toxic materials: Part I—theory and application. Miner Eng 10(7):659–66910.1016/S0892-6875(97)00046-0 ↗
8. Heddle MF (1880) Preliminary notice of substances which may prove to be new minerals. Mineral 4:117–123
9. Taylor HFW (1953) Crestmoreite and riversideite. Mineral 30:155–165
10. Claringbull GF, Hey MH (1952) A re-examination of tobermorite. Mineral 29:960–962
11. Coleman NJ, Brassington DS (2003) Synthesis of Al-substituted 11 Å tobermorite from newsprint recycling residue: a feasibility study. Mater Res Bull 38(3):485–49710.1016/S0025-5408(02)01056-5 ↗
12. Tsutsumi T, Nishimoto S, Kameshima Y, Miyake M (2014) Hydrothermal preparation of tobermorite from blast furnace slag for Cs+ and Sr2+ sorption. J Hazard Mater 266:174–18110.1016/j.jhazmat.2013.12.024 ↗
13. Maeda H, Ogawa Y, Ishida EH, Kasuga T (2012) Hydrothermal synthesis of tobermorite doped with phosphorus species for removing heavy metal ions. J Aust Ceram Soc 48(1):8–11
14. Vespa M, Dhn R, Wieland E (2014) Competition behaviour of metal uptake in cementitious systems: an XRD and EXAFS investigation of Nd− and Zn− loaded 11 Å tobermorite. Phys Chem Earth 70–71:32–3810.1016/j.pce.2014.01.001 ↗
15. Kalousek GL (1957) Crystal chemistry of hydrous calcium silicates: I. Substitution of aluminum in lattice of tobermorite. J Am Ceram Soc 40:74–8010.1111/j.1151-2916.1957.tb12579.x ↗
16. Megaw HD, Kelsey CH (1956) Crystal structure of tobermorite. Nature 177:390–39110.1038/177390a0 ↗
17. Shrivastava OP, Shrivastava R (2000) Cation exchange application of synthetic tobermorite for the immobilization and solidification of cesium and strontium in cement matrix. Bull Mater Sci 23(6):515–52010.1007/BF02903893 ↗
18. Shrivastava OP, Verma T (1995) Sr2+ sorption and leach rate studies on synthetic calcium silicate hydroxy hydrate. Adv Cem Based Mater 2(2):119–12410.1016/1065-7355(94)00032-8 ↗
19. Katsumata H, Kaneco S, Inomata K (2003) Removal of heavy metals in rinsing wastewater form planting factory by adsorption with economical viable materials. J Environ Manag 69(2):187–19110.1016/S0301-4797(03)00145-2 ↗
20. Vespa M, Dähn R, Wieland E (2014) Competition behavior of metal uptake in cementitious systems: an XRD and EXAFS investigation of Nd- and Zn-loaded 11 Å tobermorite. Phys Chem Earth 70–71(9):32–3810.1016/j.pce.2014.01.001 ↗
21. Glasser FP (1994) Immobilization potential of cementious materials. In: Proceedings of the international conference on environmental implication of construction materials and technology development, Maastricht, pp 77–86
22. Giergiczny Z, Król A (2008) Immobilization of heavy metals (Pb, Cu, Cr, Zn, Cd, Mn) in the mineral additions containing concrete composites. J Hazard Mater 160(2–3):247–25510.1016/j.jhazmat.2008.03.007 ↗
23. Maeshima T, Noma H, Sakiyama M, Mitsuda T (2003) Natural 1.1 and 1.4 nm tobermorites from Fuka, Okayama, Japan: chemical analysis, cell dimensions, 29Si NMR and thermal behavior. Cem Conc Res 33(10):1515–152310.1016/S0008-8846(03)00099-1 ↗
24. Reinik J, Heinmaa I, Mikkola J (2007) Hydrothermal alkaline treatment of oil shale ash for synthesis of tobermorite. Fuel 86(5):669–67610.1016/j.fuel.2006.09.010 ↗
25. Black L, Stumm A, Garbev K (2005) X-ray photoelectron spectroscopy of aluminium-substituted tobermorite. Cem Concr Res 35(1):51–5510.1016/j.cemconres.2004.08.005 ↗
26. Guo XL, Meng FJ, Shi HS (2017) Microstructure and characterization of hydrothermal synthesis of al-substituted tobermorite. Constr Build Mater 133(2):253–260
27. Thevenin G, Pera J (1999) Interaction between lead and different binders. Cem Concr Res 29(10):1605–161010.1016/S0008-8846(99)00144-1 ↗
28. Chen QY, Tyrer M, Hills CD (2009) Immobilisation of heavy metal in cement-based solidification/stabilisation: a review. Waste Manag 29(1):390–40310.1016/j.wasman.2008.01.019 ↗
29. Lodeiro IG, Macphee DE, Palomo A, Fernández-Jiménez A (2009) Effect of alkalis on fresh C–S–H gels FTIR analysis. Cem Concr Res 39(3):147–15310.1016/j.cemconres.2009.01.003 ↗
30. Lodeiro IG, Fernández-Jiménez A, Blanco MT, Palomo A (2008) FTIR study of the sol–gel synthesis of cementitous gels C–S–H and N–A–S–H. J Sol-Gel Sci Technol 45:63–7210.1007/s10971-007-1643-6 ↗
31. Swanepoel JC, Strydom CA (2002) Utilisation of fly ash in a geopolymeric material. Appl Geochem 17(8):1143–114810.1016/S0883-2927(02)00005-7 ↗
32. Zhang JG, Provis JL, Feng DW (2008) Geopolymers for immobilization of Cr6+, Cd2+, and Pb2+. J Hazard Mater 157(2):587–59810.1016/j.jhazmat.2008.01.053 ↗