Allowable limits for Reclaimed Asphalt Pavement (RAP) content in hot mix asphalt using simple indicative tests
Source abstract
Abstract
This study presents a framework to establish the allowable limits for Reclaimed Asphalt Pavement (RAP) content in Hot Mix Asphalt (HMA) based on indices derived from simple indicative tests on the RAP material. Such a framework can be adopted by the road agencies to develop allowable RAP content limits for the typical mix types used by the respective agency. This will allow the practitioners to make informed decisions on the allowable RAP content for a given RAP source based on the indicative tests on the RAP material. Such an approach waives the need to recover the bitumen from the RAP and subsequent testing. To achieve the stated objective, the present study has taken forward the indices from the fragmentation and cohesion tests (Sfrag and Sair-voids) based on which the RAP classification (or category) limits were proposed. These classification limits were based on test results obtained on fourteen different RAP sources with varying characteristics. The framework is presented by establishing the RAP allowable limits to these RAP categories for Bituminous Concrete (BC), the most widely used surface course HMA used in India. The RAP allowable limits were established by balancing the performance characteristics of the BC with varying amounts of RAP for each RAP source. The allowable RAP content for each category was proposed for two different grades of fresh bitumen. It was found that allowable RAP content limits obtained for RAP sources in each category are nearly the same, thus validating the classification approach adopted in the study.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Southern African Bitumen Association - SABITA (2019) Use of Reclaimed Asphalt in the Production of Asphalt - Manual 36/TRH 21; SABITA: Western Cape, South Africa
2. Kennedy TW, Tam WO, Solaimanian M (1998) Optimizing the use of reclaimed asphalt pavement with the superpave system. Assoc Asph Paving Technol 67:311–333
3. Hansen K, Newcomb D, Cervarich M (2011) Asphalt tops the charts for environmental stewardship - Again
4. Tran NH, Taylor A, Willis R (2012) Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents
5. Copeland A (2011) Reclaimed Asphalt Pavement in Asphalt Mixtures: State of the Practice
6. Newcomb DE, Brown ER, Epps JA (2007) Designing HMA mixtures with high RAP content: A practical guide
7. Kim S, Byron T, Sholar GA, Kim J (2007) Evaluation of use of high percentage of Reclaimed Asphalt Pavement (RAP) for superpave mixtures
8. Al-Qadi IL, Qazi A, Carpenter SH, et al (2012) Impact of high RAP content on structural and performance properties of asphalt mixtures
9. Mc Daniel RS, Soleymani H, Shah A (2002) Use of Reclaimed Asphalt Pavement (RAP) under superpave specifications: A regional pooled fund project10.5703/1288284313465 ↗
10. Asphalt Institute (2015) MS-2 Asphalt mix design methods
11. Asphalt Institute (1986) MS-20 Asphalt hot-mix recycling
12. Rebbechi J, Petho DL (2014) Guide to pavement technology Part 4B: Asphalt
13. Indian Roads Congress (2015) Recommended practice for recycling of bituminous pavements. IRC:120. New Delhi, India
14. EN 13108–1 (2016) Bituminous mixtures — Material specifications Part 1: Asphalt Concrete
15. Burr BL, Glover CJ, Davison RR, Bullin JA (1993) New apparatus and procedure for the extraction and recovery of asphalt binder from pavement mixtures. Transp Res Rec
16. Burr BL, Davison RR, Jemison HB, Glover CJ, Bullin JA (1991) Asphalt hardening in extraction solvents. Transp Res Board
17. Burr BL, Davison RR, Glover CJ, Bullin JA (1990) Solvent removal from asphalt. Transp Res Rec, 1269
18. Cipione CA, Davison RR, Burr BL, Glover CJ, Bullin JA (1991) Evaluation of solvents for extraction of residual asphalt from aggregates. Transp Res Board, 1323
19. Davison RR, Bullin JA, Glover CJ, Burr Jr BL, Jemison HB, Kyle ALG, Cipione CA (1989) Development of gel permeation chromatography, infrared and other tests to characterize asphalt cements and correlate with field performance.(No. FHWA/TX-90/458–1F)
20. Shirodkar P, Mehta Y, Nolan A et al (2011) A study to determine the degree of partial blending of Reclaimed Asphalt Pavement (RAP) binder for high RAP hot mix asphalt. Constr Build Mater 25:150–155. https://doi.org/10.1016/j.conbuildmat.2010.06.04510.1016/j.conbuildmat.2010.06.045 ↗
21. Al-Qadi IL, Elseifi M, Carpenter SH (2007) Reclaimed Asphlat Pavement - A Literature Review
22. McDaniel R, Michael Anderson R (2001) Recommended use of reclaimed asphalt pavement in the superpave mix design method: Technician’s manual
23. Mogawer W, Bennert T, Daniel JS et al (2012) Performance characteristics of plant produced high RAP mixtures. Road Mater Pavement Des 13:183–208. https://doi.org/10.1080/14680629.2012.65707010.1080/14680629.2012.657070 ↗
24. Doyle JD, Howard IL (2010) Laboratory investigation of high RAP content pavement surface layers
25. West R, Willis JR, Marasteanu M (2013) Improved mix design, evaluation, and materials management practices for hot mix asphalt with high reclaimed asphalt pavement content10.17226/22554 ↗
26. Tebaldi G, Dave EV, Cannone Falchetto A et al (2018) Recommendation of RILEM TC237-SIB: Protocol for characterization of Recycled Asphalt (RA) materials for pavement applications. Mater Struct 51:1–8. https://doi.org/10.1617/s11527-018-1253-510.1617/s11527-018-1253-5 ↗
27. Perraton D, Tebaldi G, Dave E, et al (2016) Tests campaign analysis to evaluate the capability of fragmentation test to characterize Recycled Asphalt Pavement (RAP) material. In: RILEM Bookseries. pp 965–97610.1007/978-94-017-7342-3_77 ↗
28. Kuna K, Airey G, Thom N (2016) Mix design considerations of foamed bitumen mixtures with reclaimed asphalt pavement material. Int J Pavement Eng 18:902–915. https://doi.org/10.1080/10298436.2015.112627110.1080/10298436.2015.1126271 ↗
29. Guduru G, Tavva TL, Kuna K (2020) Estimation of Reclaimed Asphalt Pavement (RAP) characteristics using simple indicative tests. Road Mater Pavement Des. https://doi.org/10.1080/14680629.2020.184578510.1080/14680629.2020.1845785 ↗
30. Guduru G, Kuna K (2022) An attempt to characterize the RAP material for hot recycled mix design purposes. RILEM Bookseries. Springer, Berlin, pp 199–20510.1007/978-3-030-46455-4_25 ↗
31. Guduru G, Kuna KK (2022) Classification of Reclaimed Asphalt Pavement (RAP) material using simple indicative tests. Constr Build Mater 328:127075. https://doi.org/10.1016/j.conbuildmat.2022.12707510.1016/j.conbuildmat.2022.127075 ↗
32. Indian Standard (2013) Paving Bitumen - Specification (Fourth Revision). IS:73. New Delhi, India.
33. Ministry of Road Transport & Highways (2013) Specifications for road and bridge works. New Delhi, India
34. Tebaldi G, Dave E, Cannone Falchetto A et al (2019) Recommendation of RILEM TC237-SIB on fragmentation test for recycled asphalt. Mater Struct. https://doi.org/10.1617/s11527-019-1365-610.1617/s11527-019-1365-6 ↗
35. Tebaldi G, Dave E, Cannone Falchetto A et al (2018) Recommendation of RILEM TC237-SIB on cohesion test of recycled asphalt. Mater Struct 51:1–6. https://doi.org/10.1617/s11527-018-1238-410.1617/s11527-018-1238-4 ↗
36. AASHTO MP 46–20 (2020) Standard specification for balanced mix design. 15
37. Bennert T, Haas E, Wass E (2018) Indirect tensile test (IDT) to determine asphalt mixture performance indicators during quality control testing in New Jersey. Transp Res Rec 2672:394–403. https://doi.org/10.1177/036119811879327610.1177/0361198118793276 ↗
38. Zhou F, Steger R, Mogawer W (2021) Development of a coherent framework for balanced mix design and production quality control and quality acceptance. Constr Build Mater 287:123020. https://doi.org/10.1016/j.conbuildmat.2021.12302010.1016/j.conbuildmat.2021.123020 ↗
39. Zhou F, Hu S, Newcomb D (2020) Development of a performance-related framework for production quality control with ideal cracking and rutting tests. Constr Build Mater 261:120549. https://doi.org/10.1016/j.conbuildmat.2020.12054910.1016/j.conbuildmat.2020.120549 ↗
40. Christensen DW, Bonaquist JR (2002) Use of strength tests for evaluating the rut resistance of asphalt concrete. Assoc Asph Paving Technol 71:692–711
41. Christensen DW, Bonaquist RF, Anderson DA, Gokhale S (2004) Indirect tensile strength as a simple performance test
42. Christensen DW, Bonaquist R, Jack DP (2000) Evaluation of triaxial strength as a simple test for asphalt concrete rut resistance
43. Gokhale S (2001) Simplified protocol for triaxial testing of hot mix asphalt concrete. The Pennsylvania State University
44. Stuart KD, Mogawer WS (2000) Validation of asphalt binder and mixture tests that measure rutting susceptibility using the accelerated loading facility
45. Zhou F, Im S, Sun L, Scullion T (2017) Development of an IDEAL cracking test for asphalt mix design and QC/QA. Assoc Asph Paving Technol 86:549–577. https://doi.org/10.1080/14680629.2017.138908210.1080/14680629.2017.1389082 ↗
46. Rathore M, Zaumanis M (2020) Impact of laboratory mixing procedure on the properties of reclaimed asphalt pavement mixtures. Constr Build Mater 264:120709. https://doi.org/10.1016/j.conbuildmat.2020.12070910.1016/j.conbuildmat.2020.120709 ↗