Influence of additives on poured earth strength development
Source abstract
Abstract
The aim of this paper is to study the influence of the deflocculation/flocculation process on the cohesion of clay-based materials by investigating the changes in their internal structure. Indeed, as the cohesion of earth materials finds its origin in the capillary forces between clay particles, strongly linked to the porosity of the material, the relationship between the additives, porosity and compressive strength must be understood. The fresh state properties and hardened state properties of the clay mortars, mix designed with different types of mineral additives (phosphate-based as a dispersant and calcium and magnesium based as a coagulant), were determined and compared to those of their micro- and macrostructure based on thermal gravimetric analysis. The results show that the dispersant has a strong impact on the compression strength of clay-based materials due to the optimized organization of the clay particles during the deflocculation step, leading to an increase in the capillary force intensity. Experiments confirm that coagulants decrease the global porosity and compression strength according to their solubility and reaction time. When the reaction between the dispersant and the coagulant is slow, the benefit of the dispersant on clay platelet organization, which influences the mortar stiffness and global porosity, is maintained, and the final strength is high. The TGA confirms that the coagulant has no impact on the microporosity and that the earth material returns to its initial state. Finally, guidelines for mixing and pouring can be highlighted to maximize the strength of poured earth without the addition of hydraulic binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Swilling M, Hajer M, Baynes T et al (2018) The weight of cities: resource requirements of future urbanization
2. Bajželj B, Allwood JM, Cullen JM (2013) Designing climate change mitigation plans that add up. Environ Sci Technol 47:8062–8069. https://doi.org/10.1021/es400399h10.1021/es400399h ↗
3. UN Environment (2017) Global Status Report 2017—towards a zero-emission, efficient, and resilient buildings and construction sector
4. Ioannidou D, Meylan G, Sonnemann G, Habert G (2017) Is gravel becoming scarce? Evaluating the local criticality of construction aggregates. Resour Conserv Recycl 126:25–33. https://doi.org/10.1016/j.resconrec.2017.07.01610.1016/j.resconrec.2017.07.016 ↗
5. Heeren N, Mutel CL, Steubing B et al (2015) Environmental impact of buildings—What matters? Environ Sci Technol 49:9832–9841. https://doi.org/10.1021/acs.est.5b0173510.1021/acs.est.5b01735 ↗
6. Cabernard L, Pfister S, Hellweg S (2019) A new method for analyzing sustainability performance of global supply chains and its application to material resources. Sci Total Environ 684:164–177. https://doi.org/10.1016/j.scitotenv.2019.04.43410.1016/j.scitotenv.2019.04.434 ↗
7. Celentano G, Escamilla EZ, Göswein V, Habert G (2019) A matter of speed: the impact of material choice in post-disaster reconstruction. Int J Disaster Risk Reduct 34:34–44. https://doi.org/10.1016/j.ijdrr.2018.10.02610.1016/j.ijdrr.2018.10.026 ↗
8. Habert G (2013) Assessing the environmental impact of conventional and “green” cement production. In: Eco-efficient construction and building materials: life cycle assessment (LCA), Eco-Labelling and Case Studies10.1533/9780857097729.2.199 ↗
9. Dahlbo H, Bachér J, Lähtinen K et al (2015) Construction and demolition waste management—a holistic evaluation of environmental performance. J Clean Prod. https://doi.org/10.1016/j.jclepro.2015.02.07310.1016/j.jclepro.2015.02.073 ↗
10. Société du Grand Paris (2017) Schéma de gestion et de valorisation des déblais
11. Llatas C (2011) A model for quantifying construction waste in projects according to the European waste list. Waste Manag. https://doi.org/10.1016/j.wasman.2011.01.02310.1016/j.wasman.2011.01.023 ↗
12. Vieira CS, Pereira PM (2015) Use of recycled construction and demolition materials in geotechnical applications: a review. Resour Conserv Recycl10.1016/j.resconrec.2015.07.023 ↗
13. Rubli S, Schneider T Statische model. http://www.kar-modell.ch/resultat_statMod.html
14. Hamard E, Lemercier B, Cazacliu B et al (2018) A new methodology to identify and quantify material resource at a large scale for earth construction—application to cob in Brittany. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2018.03.09710.1016/j.conbuildmat.2018.03.097 ↗
15. Gasnier H (2019) Construire en terres d’excavation, un enjeu pour la ville durable. Université Grenoble Alpes
16. Pacheco-Torgal F, Jalali S (2012) Earth construction: lessons from the past for future eco-efficient construction. Constr Build, Mater
17. Shukla A, Tiwari GN, Sodha MS (2009) Embodied energy analysis of adobe house. Renew Energy. https://doi.org/10.1016/j.renene.2008.04.00210.1016/j.renene.2008.04.002 ↗
18. Morel JC, Mesbah A, Oggero M, Walker P (2001) Building houses with local materials: means to drastically reduce the environmental impact of construction. Build Environ. https://doi.org/10.1016/S0360-1323(00)00054-810.1016/S0360-1323(00)00054-8 ↗
19. Minas C, Carpenter J, Freitag J et al (2019) Foaming of recyclable clays into energy-efficient low-cost thermal insulators. ACS Sustain Chem Eng. https://doi.org/10.1021/acssuschemeng.9b0361710.1021/acssuschemeng.9b03617 ↗
20. Ouellet-Plamondon CM, Habert G (2016) Self-Compacted Clay based Concrete (SCCC): proof-of-concept. J Clean Prod. https://doi.org/10.1016/j.jclepro.2015.12.04810.1016/j.jclepro.2015.12.048 ↗
21. Lefebvre P, BC Architects & Studies (2018) The act of building. Flämische Architekturinstitut (VAi), Antwerp, Belgium
22. Parra-Saldivar ML, Batty W (2006) Thermal behaviour of adobe constructions. Build Environ. https://doi.org/10.1016/j.buildenv.2005.07.02110.1016/j.buildenv.2005.07.021 ↗
23. Allinson D, Hall M (2010) Hygrothermal analysis of a stabilised rammed earth test building in the UK. Energy Build. https://doi.org/10.1016/j.enbuild.2009.12.00510.1016/j.enbuild.2009.12.005 ↗
24. Hall MR, Casey S (2012) Hygrothermal behaviour and occupant comfort in modern earth buildings. In: Modern earth buildings: materials, engineering, constructions and applications10.1533/9780857096166.1.17 ↗
25. Houben H, Guillaud H (1994) Earth construction: a comprehensive guide10.3362/9781780444826 ↗
26. Zhang L, Gustavsen A, Jelle BP et al (2017) Thermal conductivity of cement stabilized earth blocks. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2017.06.04710.1016/j.conbuildmat.2017.06.047 ↗
27. Morel JC, Charef R (2019) What are the barriers affecting the use of earth as a modern construction material in the context of circular economy? In: IOP conference series: earth and environmental science10.1088/1755-1315/225/1/012053 ↗
28. Kapfinger M, Sauer O (2015) Martin Rauch refined earth construction & design with rammed earth. Detail 160
29. Hamard E, Cazacliu B, Razakamanantsoa A, Morel JC (2016) Cob, a vernacular earth construction process in the context of modern sustainable building. Build Environ10.1016/j.buildenv.2016.06.009 ↗
30. Nagaraj HB, Sravan MV, Arun TG, Jagadish KS (2014) Role of lime with cement in long-term strength of Compressed Stabilized Earth Blocks. Int J Sustain Built Environ. https://doi.org/10.1016/j.ijsbe.2014.03.00110.1016/j.ijsbe.2014.03.001 ↗
31. Shubbar AA, Sadique M, Kot P, Atherton W (2019) Future of clay-based construction materials—a review. Constr Build Mater10.1016/j.conbuildmat.2019.03.206 ↗
32. Bui QB, Morel JC, Hans S, Walker P (2014) Effect of moisture content on the mechanical characteristics of rammed earth. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2013.12.06710.1016/j.conbuildmat.2013.12.067 ↗
33. Bui QB, Morel JC, Venkatarama Reddy BV, Ghayad W (2009) Durability of rammed earth walls exposed for 20 years to natural weathering. Build Environ. https://doi.org/10.1016/j.buildenv.2008.07.00110.1016/j.buildenv.2008.07.001 ↗
34. Mohamad Nidzam R, Norsalisma I, Kinuthia JM (2016) Strength and environmental evaluation of stabilised Clay-PFA eco-friendly bricks. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2016.08.11410.1016/j.conbuildmat.2016.08.114 ↗
35. Lavie Arsène MI, Frédéric C, Nathalie F (2020) Improvement of lifetime of compressed earth blocks by adding limestone, sandstone and porphyry aggregates. J Build Eng. https://doi.org/10.1016/j.jobe.2019.10115510.1016/j.jobe.2019.101155 ↗
36. Walker P, Stace T (1997) Properties of some cement stabilised compressed earth blocks and mortars. Mater Struct Constr. https://doi.org/10.1007/bf0248639810.1007/bf02486398 ↗
37. Landrou G, Brumaud C, Winnefeld F et al (2016) Lime as an anti-plasticizer for self-compacting clay concrete. Materials (Basel). https://doi.org/10.3390/ma905033010.3390/ma9050330 ↗
38. Pellenq RJM, Van Damme H (2004) Why does concrete set?: the nature of cohesion forces in hardened cement-based materials. MRS Bull. https://doi.org/10.1557/mrs2004.9710.1557/mrs2004.97 ↗
39. Bergaya F, Theng BKG, Lagaly G (2006) Handbook of clay science
40. Kang N, Hwang H (2011) Study on high strengthening of an earth wall using earth and high-performance lime. In: TerrAsia 2011. International conference on earthen architecture, October 2011, Mokpo, Korea
41. Moevus M, Fontaine L, Anger R, Doat P (2013) Projet: Béton d’Argile Environnemental (B.A.E.), final report
42. Auroville (2015) Earth as a raw material. WwwEarth-AurovilleCom
43. Imanzadeh S, Hibouche A, Jarno A, Taibi S (2018) Formulating and optimizing the compressive strength of a raw earth concrete by mixture design. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2017.12.08810.1016/j.conbuildmat.2017.12.088 ↗
44. Imanzadeh S, Jarno A, Hibouche A et al (2020) Ductility analysis of vegetal-fiber reinforced raw earth concrete by mixture design. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2019.11782910.1016/j.conbuildmat.2019.117829 ↗
45. Van Damme H, Houben H (2018) Earth concrete. Stabilization revisited. Cem Concr Res10.1016/j.cemconres.2017.02.035 ↗
46. Gelardi G, Flatt RJ (2016) Working mechanisms of water reducers and superplasticizers. In: Science and technology of concrete admixtures10.1016/B978-0-08-100693-1.00011-4 ↗
47. Moevus M, Jorand Y, Olagnon C et al (2016) Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase. Mater Struct Constr. https://doi.org/10.1617/s11527-015-0595-510.1617/s11527-015-0595-5 ↗
48. Loginov M, Larue O, Lebovka N, Vorobiev E (2008) Fluidity of highly concentrated kaolin suspensions: influence of particle concentration and presence of dispersant. Colloids Surf Physicochem Eng Asp. https://doi.org/10.1016/j.colsurfa.2008.04.04010.1016/j.colsurfa.2008.04.040 ↗
49. Castellini E, Berthold C, Malferrari D, Bernini F (2013) Sodium hexametaphosphate interaction with 2:1 clay minerals illite and montmorillonite. Appl Clay Sci. https://doi.org/10.1016/j.clay.2013.08.03110.1016/j.clay.2013.08.031 ↗
50. Perrot A, Rangeard D, Levigneur A (2016) Linking rheological and geotechnical properties of kaolinite materials for earthen construction. Mater Struct Constr. https://doi.org/10.1617/s11527-016-0813-910.1617/s11527-016-0813-9 ↗
51. Landrou G, Brumaud C, Plötze ML et al (2018) A fresh look at dense clay paste: deflocculation and thixotropy mechanisms. Colloids Surf Physicochem Eng Asp. https://doi.org/10.1016/j.colsurfa.2017.12.02910.1016/j.colsurfa.2017.12.029 ↗
52. Pinel A, Jorand Y, Olagnon C et al (2017) Towards poured earth construction mimicking cement solidification: demonstration of feasibility via a biosourced polymer. Mater Struct Constr. https://doi.org/10.1617/s11527-017-1092-910.1617/s11527-017-1092-9 ↗
53. Perrot A, Rangeard D, Menasria F, Guihéneuf S (2018) Strategies for optimizing the mechanical strengths of raw earth-based mortars. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2018.02.05510.1016/j.conbuildmat.2018.02.055 ↗
54. Landrou G, Brumaud C, Habert G (2018) Influence of magnesium on deflocculated kaolinite suspension: mechanism and kinetic control. Colloids Surf Physicochem Eng Asp. https://doi.org/10.1016/j.colsurfa.2017.12.04010.1016/j.colsurfa.2017.12.040 ↗
55. Lagaly G, Ziesmer S (2003) Colloid chemistry of clay minerals: the coagulation of montmorillonite dispersions. Adv Colloid Interface Sci. https://doi.org/10.1016/S0001-8686(02)00064-710.1016/S0001-8686(02)00064-7 ↗
56. Tang Z, Kotov NA, Magonov S, Ozturk B (2003) Nanostructured artificial nacre. Nat Mater. https://doi.org/10.1038/nmat90610.1038/nmat906 ↗
57. Kpogbémabou D, Gridi-Bennadji F, Hoang LC et al (2014) Structural and microstructural studies of montmorillonite-based multilayer nanocomposites. J Colloid Interface Sci. https://doi.org/10.1016/j.jcis.2013.10.03710.1016/j.jcis.2013.10.037 ↗
58. Mpofu P, Addai-Mensah J, Ralston J (2004) Flocculation and dewatering behaviour of smectite dispersions: effect of polymer structure type. Miner Eng. https://doi.org/10.1016/j.mineng.2003.11.01010.1016/j.mineng.2003.11.010 ↗
59. Landrou G (2018) Development of Self-compacting clay concrete. ETH Zurich
60. Van Olphen H (1977) An introduction to clay colloid chemistry, for clay technologists, geologists, and soil scientists10.1097/00010694-197807000-00013 ↗
61. EN196-1 (2005) Methods of testing cement—Part 1: Determination of strength. Eur Stand
62. Dzuy NQ, Boger DV (1985) Direct yield stress measurement with the vane method. J Rheol (N Y N Y). https://doi.org/10.1122/1.54979410.1122/1.549794 ↗
63. Saak AW, Jennings HM, Shah SP (2001) The influence of wall slip on yield stress and viscoelastic measurements of cement paste. Cem Concr Res. https://doi.org/10.1016/S0008-8846(00)00440-310.1016/S0008-8846(00)00440-3 ↗
64. Coussot P (2005) Rheometry of pastes, suspensions, and granular materials10.1002/0471720577 ↗
65. Nachbaur L, Mutin JC, Nonat A, Choplin L (2001) Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting. Cem Concr Res. https://doi.org/10.1016/S0008-8846(00)00464-610.1016/S0008-8846(00)00464-6 ↗
66. Sedran T, De Larrard F, Le Guen L (2007) Détermination de la compacité des ciments et additions minérales à la sonde de Vicat. Bull des Lab des Ponts Chaussees
67. Habert G, Choupay N, Escadeillas G et al (2009) Clay content of argillites: influence on cement based mortars. Appl Clay Sci. https://doi.org/10.1016/j.clay.2008.09.00910.1016/j.clay.2008.09.009 ↗
68. Cheng K, Heidari Z (2017) Combined interpretation of NMR and TGA measurements to quantify the impact of relative humidity on hydration of clay minerals. Appl Clay Sci. https://doi.org/10.1016/j.clay.2017.04.00610.1016/j.clay.2017.04.006 ↗
69. Kakali G, Perraki T, Tsivilis S, Badogiannis E (2001) Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity. Appl Clay Sci. https://doi.org/10.1016/S0169-1317(01)00040-010.1016/S0169-1317(01)00040-0 ↗
70. Obada DO, Dodoo-Arhin D, Dauda M et al (2017) The impact of kaolin dehydroxylation on the porosity and mechanical integrity of kaolin based ceramics using different pore formers. Results Phys. https://doi.org/10.1016/j.rinp.2017.07.04810.1016/j.rinp.2017.07.048 ↗
71. Brindley GW, Nakahira M (1959) The kaolinite‐mullite reaction series: II, metakaolin. J Am Ceram Soc. https://doi.org/10.1111/j.1151-2916.1959.tb14315.x10.1111/j.1151-2916.1959.tb14315.x ↗
72. Bellotto M, Gualtieri A, Artioli G, Clark SM (1995) Kinetic study of the kaolinite-mullite reaction sequence. Part I: kaolinite dehydroxylation. Phys Chem Miner. https://doi.org/10.1007/BF0020225310.1007/BF00202253 ↗
73. Roussel N, Coussot P (2005) “Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow. J Rheol (N Y N Y). https://doi.org/10.1122/1.187904110.1122/1.1879041 ↗
74. ASTM C230 (2010) Standard specification for flow table for use in tests of hydraulic cement 1. Annu B ASTM Stand. https://doi.org/10.1520/C023010.1520/C0230 ↗
75. Lecomte A, Mechling JM, Diliberto C (2009) Compaction index of cement paste of normal consistency. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2009.05.00510.1016/j.conbuildmat.2009.05.005 ↗
76. de Larrard F (1999) Concrete mixture proportioning: a scientific approach10.1201/9781482272055 ↗
77. Roussel N (2006) A theoretical frame to study stability of fresh concrete. Mater Struct Constr. https://doi.org/10.1617/s11527-005-9036-110.1617/s11527-005-9036-1 ↗
78. Sikorski D, Tabuteau H, de Bruyn JR (2009) Motion and shape of bubbles rising through a yield-stress fluid. J Nonnewton Fluid Mech. https://doi.org/10.1016/j.jnnfm.2008.11.01110.1016/j.jnnfm.2008.11.011 ↗
79. Ducloué L, Pitois O, Goyon J et al (2015) Rheological behaviour of suspensions of bubbles in yield stress fluids. J Nonnewton Fluid Mech. https://doi.org/10.1016/j.jnnfm.2014.10.00310.1016/j.jnnfm.2014.10.003 ↗
80. Mirzaagha S, Pasquino R, Iuliano E et al (2017) The rising motion of spheres in structured fluids with yield stress. Phys Fluids. https://doi.org/10.1063/1.499874010.1063/1.4998740 ↗
81. Nimmo JR (2004) Porosity and pore-size distribution. In: Encyclopedia of soils in the environment10.1016/B0-12-348530-4/00404-5 ↗