journal article·2021-06Open access

Slip rate effects and cyclic behaviour of textile-to-matrix bond in textile reinforced mortar composites

Ali Dalalbashi, Stefano De Santis, Bahman Ghiassi, Daniel V. Oliveira

Materials and Structures· Volume 54· Issue 3

Abstract

The structural effectiveness of textile reinforced mortar (TRM) composites relies on their load transfer capacity to the substrate and the interaction between textile and mortar. The bond plays a crucial role in mechanism of TRM composites. Despite some recent investigations, a deep understanding still needs to be gained on the textile-to-mortar bond to develop suitable analytical and numerical predictive models, improve test methods, and orient design criteria. This work describes a laboratory study in which pull-out tests were carried out to investigate the effect of the slip rate and cyclic loading on the textile-to-mortar bond behaviour. Alkali-resistant glass fabric and sgalvanised ultra-high tensile strength steel cords embedded in two different lime-based mortars were tested. The pull-out response was sensitive to the strain rate at low rates. Cyclic loading produced a strength degradation, which reduced with the number of cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Barton B, Wobbe E, Dharani LR et al (2005) Characterization of reinforced concrete beams strengthened by steel reinforced polymer and grout (SRP and SRG) composites. Mater Sci Eng A 412:129–136. https://doi.org/10.1016/j.msea.2005.08.15110.1016/j.msea.2005.08.151 ↗
2. Triantafillou TC, Papanicolaou CG (2005) Textile reinforced mortars (TRM) versus fiber reinforced polymers (FRP) as strengthening materials of concrete structures. In: the 7th International Symposium on Fiber- Reinforced (FRP) Polymer Reinforcement for Concrete Structures (FRPRCS-7): ACI SP-230–6. pp 99–118
3. Ghiassi B (2019) Mechanics and durability of textile reinforced mortars: a review of recent advances and open issues. RILEM Tech Lett 4:130–137. https://doi.org/10.21809/rilemtechlett.2019.9910.21809/rilemtechlett.2019.99 ↗
4. Loreto G, Babaeidarabad S, Leardini L, Nanni A (2015) RC beams shear-strengthened with fabric-reinforced-cementitious-matrix (FRCM) composite. Int J Adv Struct Eng 7:341–352. https://doi.org/10.1007/s40091-015-0102-910.1007/s40091-015-0102-9 ↗
5. Napoli A, Realfonzo R (2015) Reinforced concrete beams strengthened with SRP/SRG systems: experimental investigation. Constr Build Mater 93:654–677. https://doi.org/10.1016/j.conbuildmat.2015.06.02710.1016/j.conbuildmat.2015.06.027 ↗
6. Pino V, Akbari Hadad H, Caso De, y Basalo F, et al (2017) Performance of FRCM-strengthened RC beams subject to fatigue. J Bridg Eng 22:04017079. https://doi.org/10.1061/(ASCE)BE.1943-5592.000110710.1061/(ASCE)BE.1943-5592.0001107 ↗
7. Raoof SM, Koutas LN, Bournas DA (2017) Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in flexural strengthening of RC beams. Constr Build Mater 151:279–291. https://doi.org/10.1016/j.conbuildmat.2017.05.02310.1016/j.conbuildmat.2017.05.023 ↗
8. Borri A, Casadei P, Castori G, Hammond J (2009) Strengthening of brick masonry arches with externally bonded steel reinforced composites. J Compos Constr 13:468–475. https://doi.org/10.1061/(ASCE)CC.1943-5614.000003010.1061/(ASCE)CC.1943-5614.0000030 ↗
9. Papanicolaou C, Triantafillou T, Lekka M (2011) Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels. Constr Build Mater 25:504–514. https://doi.org/10.1016/j.conbuildmat.2010.07.01810.1016/j.conbuildmat.2010.07.018 ↗
10. Babaeidarabad S, De Caso F, Nanni A (2014) Out-of-plane behavior of URM walls strengthened with fabric-reinforced cementitious matrix composite. J Compos Constr 549:457. https://doi.org/10.1061/(ASCE)CC.1943-5614.000045710.1061/(ASCE)CC.1943-5614.0000457 ↗
11. Marcari G, Basili M, Vestroni F (2017) Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar. Compos Part B Eng 108:131–142. https://doi.org/10.1016/j.compositesb.2016.09.09410.1016/j.compositesb.2016.09.094 ↗
12. Bellini A, Incerti A, Bovo M, Mazzotti C (2018) Effectiveness of FRCM reinforcement applied to masonry walls subject to axial force and out-of-plane loads evaluated by experimental and numerical studies. Int J Archit Herit 12:1323246. https://doi.org/10.1080/15583058.2017.132324610.1080/15583058.2017.1323246 ↗
13. De Santis S, Roscini F, de Felice G (2018) Full-scale tests on masonry vaults strengthened with steel reinforced grout. Compos Part B Eng 141:20–36. https://doi.org/10.1016/j.compositesb.2017.12.02310.1016/j.compositesb.2017.12.023 ↗
14. De Santis S, De Canio G, de Felice G et al (2019) Out-of-plane seismic retrofitting of masonry walls with textile reinforced mortar composites. Bull Earthq Eng 17:6265–6300. https://doi.org/10.1007/s10518-019-00701-510.1007/s10518-019-00701-5 ↗
15. De Santis S, de Felice G, Roscini F (2019) Retrofitting of masonry vaults by basalt textile-reinforced mortar overlays. Int J Archit Herit 13:1061–1077. https://doi.org/10.1080/15583058.2019.159794710.1080/15583058.2019.1597947 ↗
16. de Felice G, De Santis S, Garmendia L et al (2014) Mortar-based systems for externally bonded strengthening of masonry. Mater Struct 47:2021–2037. https://doi.org/10.1617/s11527-014-0360-110.1617/s11527-014-0360-1 ↗
17. De Santis S, Hadad HA, Caso De, y Basalo F, et al (2018) Acceptance criteria for tensile characterization of fabric-reinforced cementitious matrix systems for concrete and masonry repair. J Compos Constr 22:04018048. https://doi.org/10.1061/(ASCE)CC.1943-5614.000088610.1061/(ASCE)CC.1943-5614.0000886 ↗
18. Meriggi P, de Felice G, De Santis S (2020) Design of the out-of-plane strengthening of masonry walls with textile reinforced mortar composites. Constr Build Mater 240:117946. https://doi.org/10.1016/j.conbuildmat.2019.11794610.1016/j.conbuildmat.2019.117946 ↗
19. D’Ambrisi A, Feo L, Focacci F (2013) Experimental and analytical investigation on bond between Carbon-FRCM materials and masonry. Compos Part B Eng 46:15–20. https://doi.org/10.1016/j.compositesb.2012.10.01810.1016/j.compositesb.2012.10.018 ↗
20. Sneed LH, D’Antino T, Carloni C (2014) Investigation of bond behavior of polyparaphenylene benzobisoxazole fiber-reinforced cementitious matrix composite-concrete interface. ACI Mater J 111:568. https://doi.org/10.14359/5168660410.14359/51686604 ↗
21. Razavizadeh A, Ghiassi B, Oliveira DV (2014) Bond behavior of SRG-strengthened masonry units: testing and numerical modeling. Constr Build Mater 64:387–397. https://doi.org/10.1016/j.conbuildmat.2014.04.07010.1016/j.conbuildmat.2014.04.070 ↗
22. Carozzi FG, Poggi C (2015) Mechanical properties and debonding strength of fabric reinforced cementitious matrix (FRCM) systems for masonry strengthening. Compos Part B Eng 70:215–230. https://doi.org/10.1016/j.compositesb.2014.10.05610.1016/j.compositesb.2014.10.056 ↗
23. De Santis S (2017) Bond behaviour of steel reinforced grout for the extrados strengthening of masonry vaults. Constr Build Mater 150:367–382. https://doi.org/10.1016/j.conbuildmat.2017.06.01010.1016/j.conbuildmat.2017.06.010 ↗
24. de Felice G, D’Antino T, De Santis S et al (2020) Lessons learned on the tensile and bond behaviour of fabric reinforced cementitious matrix (FRCM) composites. Front Built Environ 6:1–15. https://doi.org/10.3389/fbuil.2020.0000510.3389/fbuil.2020.00005 ↗
25. Brameshuber W (2006) RILEM TC 201-TRC: Textile reinforced concrete- state-of-the-art. RILEM, Bagneux
26. Mobasher B (2012) Mechanics of fiber and textile reinforced cement composites. Taylor & Francis Group, London- New York
27. Häußler-Combe U, Hartig J (2007) Bond and failure mechanisms of textile reinforced concrete ( TRC ) under uniaxial tensile loading. Cem Concr Compos 29:279–289. https://doi.org/10.1016/j.cemconcomp.2006.12.01210.1016/j.cemconcomp.2006.12.012 ↗
28. Hegger J, Will N, Bruckermann O, Voss S (2006) Load-bearing behaviour and simulation of textile reinforced concrete. Mater Struct 39:765–776. https://doi.org/10.1617/s11527-005-9039-y10.1617/s11527-005-9039-y ↗
29. Banholzer B (2006) Bond of a strand in a cementitious matrix. Mater Struct 39:1015–1028. https://doi.org/10.1617/s11527-006-9115-y10.1617/s11527-006-9115-y ↗
30. D’Antino T, Pellegrino C, Carloni C et al (2014) Experimental analysis of the bond behavior of glass, carbon, and steel FRCM composites. Key Eng Mater 624:371–378. https://doi.org/10.4028/www.scientific.net/KEM.624.37110.4028/www.scientific.net/KEM.624.371 ↗
31. D’Antino T, Carrozzi FG, Colombi P, Poggi C (2017) A new pull-out test to study the bond behavior of fiber reinforced cementitious composites. Key Eng Mater 747:258–265. https://doi.org/10.4028/www.scientific.net/KEM.747.25810.4028/www.scientific.net/KEM.747.258 ↗
32. Dalalbashi A, Ghiassi B, Oliveira DV, Freitas A (2018) Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: experimental and analytical modeling. Compos Part B Eng 143:250–268. https://doi.org/10.1016/j.compositesb.2018.02.01010.1016/j.compositesb.2018.02.010 ↗
33. Ghiassi B, Oliveira DV, Marques V et al (2016) Multi-level characterization of steel reinforced mortars for strengthening of masonry structures. Mater Des 110:903–913. https://doi.org/10.1016/j.matdes.2016.08.03410.1016/j.matdes.2016.08.034 ↗
34. Dalalbashi A, Ghiassi B, Oliveira DV, Freitas A (2018) Fiber-to-mortar bond behavior in TRM composites: effect of embedded length and fiber configuration. Compos Part B Eng 152:43–57. https://doi.org/10.1016/j.compositesb.2018.06.01410.1016/j.compositesb.2018.06.014 ↗
35. Dalalbashi A, Ghiassi B, Oliveira DV (2019) Textile-to-mortar bond behaviour in lime-based textile reinforced mortars. Constr Build Mater 227:116682. https://doi.org/10.1016/j.conbuildmat.2019.11668210.1016/j.conbuildmat.2019.116682 ↗
36. Le HV, Moon D, Kim DJ (2018) Effects of ageing and storage conditions on the interfacial bond strength of steel fibers in mortars. Constr Build Mater 170:129–141. https://doi.org/10.1016/j.conbuildmat.2018.03.06410.1016/j.conbuildmat.2018.03.064 ↗
37. (2012) Planitop HDM Restauro- 1071–2–2012. In: MAPEI. https://www.mapei.com/it/en/products-and-solutions/products/detail/planitop-hdm
38. (2016) GeoCalce Fino. In: Kerakoll. https://shop.vittoriosabato.it/uploads/products/attachments/561_KERAKOLL BIOCALCE FINO KG25.pdf
39. (2019) Mapegride G220- 1033–7–2019 (GB). In: MAPEI. https://www.mapei.com/it/en/products-and-solutions/products/detail/mapegrid-g-220
40. (2014) GeoSteel G600 Code: E865 2014/07. In: Kerakoll. https://products.kerakoll.com/en/p/geosteel-g600
41. (2005) ASTM C109/C109M-05, Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] Cube Specimens)
42. (1999) BS EN 1015–11, Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
43. Redon C, Li VC, Wu C et al (2001) Measuring and modifying interface properties of PVA fibers in ECC matrix. J Mater Civ Eng 13:399–406. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:6(399)10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
44. Lin Z, Kanda T, Li VC (1999) On interface property characterization and performance of fiber reinforced cementitious composites. J Concr Sci Eng RILEM 1:173–184
45. Naik DL, Sharma A, Chada RR et al (2019) Modified pullout test for indirect characterization of natural fiber and cementitious matrix interface properties. Constr Build Mater 208:381–393. https://doi.org/10.1016/j.conbuildmat.2019.03.02110.1016/j.conbuildmat.2019.03.021 ↗
46. Boshoff WP, Mechtcherine V, van Zijl GPAG (2009) Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 2: The rate effects on fibre pull-out tests. Cem Concr Res 39:787–797. https://doi.org/10.1016/j.cemconres.2009.06.00610.1016/j.cemconres.2009.06.006 ↗
47. Li VC, Wu HC, Chan YW (1995) Interfacial property tailoring for pseudo strain- hardening cementitious composites. Adv Technol Des Fabr Compos Mater Struct Eng Appl Fract Mech 14:261–268. https://doi.org/10.1007/978-94-015-8563-7_1810.1007/978-94-015-8563-7_18 ↗
48. Li VC, Wu H-C, Chan Y-W (1996) Effect of plasma treatment of polyethylene fibers on interface and ementitious composite properties. J Am Ceram Soc 79:700–704. https://doi.org/10.1111/j.1151-2916.1996.tb07932.x10.1111/j.1151-2916.1996.tb07932.x ↗
49. Lin Z, Li VC (1997) Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces. J Mech Phys Solids 45:763–787. https://doi.org/10.1016/S0022-5096(96)00095-610.1016/S0022-5096(96)00095-6 ↗
50. Wang Y, Li VC, Backer S (1988) Analysis of synthetic fiber pull-out from a cement matrix. Mater Res Soc Symp Bond Cem Compos 114:159–166. https://doi.org/10.1557/PROC-114-15910.1557/PROC-114-159 ↗
51. Wang Y, Lf VC, Backer S (1988) Modelling of fibre pull-out from a cement matrix. Int J Cem Compos 10:143–149. https://doi.org/10.1016/0262-5075(88)90002-410.1016/0262-5075(88)90002-4 ↗