journal article·2016-09

Flexural behavior of hybrid hollow-core slab built with ultra high performance concrete faces

Abul K. Azad, Ibrahim Y. Hakeem

Materials and Structures· Volume 49· Issue 9
Publisher page

Abstract

In this paper, a new hybrid construction of hollow core slab-type members, in which a middle hollow core layer of ordinary Portland cement concrete is sandwiched in-between a top and bottom layer of steel fiber-reinforced ultra -high performance concrete, is explored to examine their structural adequacy. The tests of beam-type specimens, cast without any traditional steel reinforcement, have confirmed adequate flexural strength. The structural behavior is characterized by almost linear response up to the peak-cracking load, followed by a post-cracking softening with increased deflection under declining load.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Graybeal BA (2006) Material property characterization of ultra-high performance concrete, FHWA-HRT-06-103
2. Graybeal BA, Hartmann J (2003) Strength and durability of ultra-high performance concrete. In: concrete bridge conference, Portland cement association, Orlando
3. Graybeal BA (2003) Characterization of the behavior of ultra-high performance concrete. PhD Dis, Faculty of the Graduate School of the University of Maryland
4. Richard P, Cheyrezy M (1995) Composition of reactive powder concretes. Cem Concr Res 25(7):1501–151110.1016/0008-8846(95)00144-2 ↗
5. Hakeem IY (2011) Characterization of an ultra-high performance concrete. MS Thesis, Department of Civil Engineering, King Fahd University of petroleum and minerals, Dhahran
6. Hakeem IY, Azad AK, Ahmad S (2013) Effect of steel fibres and thermal cycles on fracture properties of ultra-high performance concrete. J Test Eval, ASTM 2013 41(3): 110.1520/JTE20120182 ↗
7. Azad AK, Ahmad S, Hakeem IY (2013) Effect of cyclic exposure and fiber content on tensile properties of ultra-high performance concrete. Adv Cem Res 25(5):273–28010.1680/adcr.12.00039 ↗
8. Ahmad S, Hakeem IY, Azad AK (2014) Effect of curing regime, fiber content and cyclic exposures on the compressive strength and modulus of elasticity of ultra-high performance concrete. Adv Cem Res 27(4):233–23910.1680/adcr.13.00090 ↗
9. Collepardi S, Coppola R, Troli L, Collepardi M (1996) Mechanical properties of modified reactive powder concrete. ACI 1996 SP-173: 1–21
10. Habel K, Charron JR, Denarié Brühwiler E (2006) Autogenous deformations and viscoelasticity of uhpfrc in structures. Mag Concr Res 58(3):135–14510.1680/macr.2006.58.3.135 ↗
11. Loukili A, Khelidj A, Richard P (1999) Hydration kinetics, change of relative humidity, and autogenous shrinkage of ultra-high-strength concrete. Cem Concr Res 29(4):577–58410.1016/S0008-8846(99)00022-8 ↗
12. Magureanu C, Sosa I, Negrete C, Heghes B (2012) Mechanical properties and durability of ultra-high-performance concrete. ACI Mater J 109(2):177–183
13. Hassan AM, Jones SW, Mahmud GH (2012) Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra-high performance fibre reinforced concrete (UHPFRC). Constr Build Mater 37:874–88210.1016/j.conbuildmat.2012.04.030 ↗
14. Dong JK, Seung HP, Gum SR, Kyung TK (2011) Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different microfibers. Constr Build Mater 25(11):4144–415510.1016/j.conbuildmat.2011.04.051 ↗
15. Hwan YI, Changbin JB, Byung SK (2010) Structural behavior of ultra-high performance concrete beams subjected to bending. Eng Struct 32:3478–348710.1016/j.engstruct.2010.07.017 ↗
16. Doo-Yeol Y, Lee J-H, Yoon Y-S (2013) Effect of fiber content on mechanical and fracture properties of ultra-high performance fiber reinforced cementitious composites. Compos Struct 106:742–75310.1016/j.compstruct.2013.07.033 ↗
17. Kang ST, Lee Y, Park YD, Kim JK (2010) Tensile fracture properties of an ultra high performance fiber reinforced concrete (UHPFRC) with steel fiber. Compos Struct 92(1):61–7110.1016/j.compstruct.2009.06.012 ↗
18. Ryu GS, Kang ST, Park JJ, Koh KT, Kim SW (2011) Mechanical behavior of ultra high performance concrete according to hybrid use of steel fibers. Adv Mater Res 287–290:453–457
19. Park SH, Kim DJ, Ryu GS, Koh KT (2012) Tensile behavior of ultra-high performance hybrid fiber reinforced concrete. Cem Concr Compos 34(2):172–18410.1016/j.cemconcomp.2011.09.009 ↗
20. Wille K, Kim DJ, Naaman AE (2011) Strain-hardening UHP-FRC with low fiber contents. Mater Struct 44(3):583–59810.1617/s11527-010-9650-4 ↗
21. Habel K, Denarié E, Brühwiler E (2006) Time dependent behavior of elements combining ultra- high performance fiber reinforced concretes, UHPRFC and reinforced concrete. Mater Struct 39:557–56910.1007/s11527-005-9045-0 ↗
22. Wille K, Dong JK, Naaman AE (2011) Strain-hardening UHP-FRC with low fiber contents. Mater Struct 44:583–59810.1617/s11527-010-9650-4 ↗
23. Akkya Y, Shah SP, Ankenman B (2001) Effect of fiber dispersion on multiple cracking of cement composites. J Eng Mech 127(4):311–31610.1061/(ASCE)0733-9399(2001)127:4(311) ↗
24. Stephanie JB, Jean-Francois L, Tony P, Steve GM, Marios NS (2010) Assessment of fibre orientation in ultra-high performance fibre reinforced concrete and its effect on flexural strength. Mater Struct 43:1009–102310.1617/s11527-009-9562-3 ↗
25. Kang ST, Lee BY, Kim JK, Kim YY (2011) The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra-high strength concrete. Constr Build Mater 25:2450–245710.1016/j.conbuildmat.2010.11.057 ↗
26. Kang ST, Kim JK (2012) Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution. Constr Build Mater 28(1):57–6510.1016/j.conbuildmat.2011.07.003 ↗
27. Perry V, Zakariasen D (2004) First use of ultra-high performance concrete for an innovative train station canopy. Concr Technol Today 25(2):1–2
28. Graybeal B (2009) UHPC in the U.S. highway infrastructure. Designing and building with UHPFRC, Marseille
29. Tanaka Y, Musya H, Ootake A, Shimoyama Y, Kaneko O (2002) Design and construction of sakata-mirai footbridge using reactive powder concrete. Proc First Fib Congr 3:417–424
30. Lee CD, Kim KI-B, Choi S (2013) Application of ultra-high performance concrete to pedestrian cable-stayed bridges. J Eng Sci Technol 8(3):296–305
31. Chen D, El-Hacha R (2010) Flexural behaviour of hybrid FRP-UHPC girders under static loading. In: proceedings of 8th international conference on short and medium span bridges, Niagara Falls
32. Ferrier E, Labossière P, Neale KW (2010) Mechanical behavior of an innovative hybrid beam made of Glulam and ultrahigh-performance concrete reinforced with FRP or steel. J Compos Constr ASCE 14:217–22310.1061/(ASCE)CC.1943-5614.0000063 ↗
33. Schäfers M, Seim W (2011) Investigation on bonding between timber and ultra-high performance concrete (UHPC). Constr Build Mater 25:3078–308810.1016/j.conbuildmat.2010.12.060 ↗
34. Azad AK, Hakeem IY (2012) Flexural behavior of hybrid high performance concrete construction. In: Proceedings of first Australasia and South-East Asia structural engineering and construction, ASEA-SEC-1, Perth
35. Youssef G, Loulou L, Chataigner S, André SC (2014) Analysis of the behaviour of a bonded joint between laminated wood and ultra-high performance fibre reinforced concrete using push-out test. Constr Build Mater 53:381–39110.1016/j.conbuildmat.2013.10.074 ↗
36. Azad AK, Hakeem IY (2013) Flexural behaviour of hybrid concrete beams reinforced with ultra- high performance concrete bars. Constr Build Mater 49:128–13310.1016/j.conbuildmat.2013.08.005 ↗
37. Cuenca E, Serna P (2013) Failure modes and shear design of prestressed hollow core slabs made of fiber-reinforced concrete. Compos Part B 45(1):952–96410.1016/j.compositesb.2012.06.005 ↗
38. Hakeem IY (2014) Structural behavior of unreinforced hybrid slab elements cast with ultra high performance concrete (UHPC). PhD des, Deanship of Graduate Studies, King Fahd University of petroleum and minerals, Dhahran
39. Brunesi E, Bolognini D, Nascimbene R (2015) Evaluation of the shear capacity precast-prestressed hollow core slabs: numerical and experimental comparisons. Mater Struct 48(5):1503–152110.1617/s11527-014-0250-6 ↗
40. Hawkins NM, Ghosh SK (2006) Shear strength of hollow core slabs. PCI J 51910:110–115
41. Nilson AH, Winter G (1991) Design of concrete structures, 11th edn. McGraw Hill, New York