journal article·2021-10

Experimental study on bending performance of different types of UHPC in bridge stitching joint

Qixin Sun, Chao Liu, Lixin Sha, Yuanchun Lu

Materials and Structures· Volume 54· Issue 5
Publisher page

Abstract

In this research, the rapid bridge splicing technology was studied for the Shanghai Jiyang Road viaduct bridge splicing project. In the experimental study, the form of stitching joint was designed to best suit the existing bridge, and three types of ultra-high performance concrete materials (high strain-hardening I type, high strain-hardening II type and strain softening type) were adopted. In the experiment, asymmetrical loading was used to simulate the uneven settlement between the new and the existing bridge. The failure mode and structural performance of the joint under the uneven settlement was studied. The structural performance, bearing capacity and crack control ability were compared among different test models regarding the joint types and the joint materials. Secondly, the test results were verified with the finite element analysis results. Parametric analysis is then carried out using the finite element model. The investigated factors include the constitutive models of the joint material, the free length and the joint thickness. The results showed that the finite element results were in good agreement with the test results. The study in this paper has successfully guided the actual engineering construction and achieved good results, which can be used for reference for similar projects in the future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Hosseini M, Jefferson AD (1998) Time-dependent behavior of widened reinforced concrete under-bridge. Mater Struct 319(12):714–71910.1007/BF02480449 ↗
2. Caner A, Zia P (1998) Behavior and design of link slabs for jointless bridge decks. Pci J 43(43):68–8110.15554/pcij.05011998.68.80 ↗
3. Lund JAV, Brecto BB (1999) Jointless bridges and bridge deck joints in Washington state. Transp Res Rec 1688(1688):116–12310.3141/1688-13 ↗
4. Oesterle RG, Mehrabi AB, Tabatabai H, Scanlon A, Ligozio CA (2004) Continuity considerations in prestressed concrete jointless bridges. Struct Congr 25:1–8
5. Oesterle RG, Refai TM, Volz JS, Scanlon A, Weiss WJ (2002) Jointless and integral abutment bridges, analytical research and proposed design procedures. Report to FHWA
6. Tabatabai H, Oesterle RG, Lawson TJ (2002) Jointless and integral abutment bridges, experimental research and field studies. Report to FHWA
7. Florida Department of Transportation (1995) Bridge operation and maintenance manual Florida Department of Transportation, USA
8. Richaed N (1988) BEF analogy for analysis of girder. Proc ASCE 94(7):66
9. ACI Committee 345 (2013) Guide for widening highway bridges (345.2R-13) Farmington Hills. American Concrete Institute (ACI), MI, pp 1–15
10. Wipf TJ, Fanous FS, Klaiber FW et al (2003) Evaluation of appropriate maintenance, repair and rehabilitation methods for Iowa Bridges. Final Report for Iowa DOT Project TR-429. Iowa State University, Ames , pp 1–105
11. SCDOT (2006) Bridge design manual, Chapter 23: bridge widening and rehabilitation Columbia. South Carolina Department of Transportation (SCDOT), SC, pp 1–13
12. Caltrans Memo to Designers (2010) Chapter 9-3: bridge widening of existing bridges Sacramento. California Department of Transportation (Caltrans), CA, pp 1–19
13. WisDOT (2006) Bridge manual, Chapter 40: Bridge rehabilitation. Wisconsin Department of Transportation (WisDOT), Madison , pp 3–57
14. Ran Y (2018) Study on the methods of widening superstructure based on stiffness difference. Master Dissertation, Chang’an University, Xian (Chinese)
15. Wu WQ, Ye JS, Ju JY, Hua B (2007) Current situation and scheme anal sis of bridge widening in expressway expansion. J China Foreign Highw 6:100–104 ((Chinese))
16. Ulku E, Attanayake U, Aktan H (2009) Jointless bridge deck with link slabs. Transp Res Rec 2131(2131):68–7810.3141/2131-07 ↗
17. Qian S, Lepech MD, Yun YK, Li VC (2009) Introduction of transition zone design for bridge deck link slabs using ductile concrete. ACI Struct J 106(1):96–105
18. Liu HY, Zhao SC, Li L (2015) Study on bridge deck link slabs of simply supported girder bridges. Adv Mater Res 1079–1080:280–285
19. Yen WP, Dekelbab W, Khaleghi B (2017) Connections for integral jointless bridges in seismic regions suitable for accelerated bridge construction. Transp Res Rec 2642:147–15410.3141/2642-16 ↗
20. Shanghai Urban and Rural Construction and Management Commission (2015) Code for design of expressway reconstruction and expansion (DG/TJ08-21742015). Tongji University Press, Shanghai, pp 1–99 (Chinese)
21. Saber A (2012) Aleti AR (2014) Behavior of FRP link slabs in jointless bridge decks. A Civ Eng 1687–8086:140–148
22. Hassoon A, Aljanabi A (2020) Improvement of flexural capacity of hybrid, reinforced concrete spliced girders using steel fiber concrete in splice region and near surface mounted carbon fiber-reinforced polymer bars: experimental investigations. Innov Infrastruct Solut 5(1):12–1910.1007/s41062-020-0261-9 ↗
23. Kim YY, Li VC (2004) Fatigue response of bridge deck link slabs designed with ductile engineered cementitious composite (ECC). Seoul National University, Korea Concrete Institute, Seoul, pp 832–841
24. Lepech MD, Li VC (2009) Application of ECC for bridge deck link slabs. Mater Struct 42(9):118510.1617/s11527-009-9544-5 ↗
25. Li VC, Lepech M, Li M (2005) Field demonstration of durable link slabs for jointless bridge decks based on strain-hardening cementitious composites (Research Report RC-1471). The Advanced Civil Engineering Material Research Laboratory Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor
26. Zheng Y, Zhang LF, Xia LP (2018) Investigation of the behavior of flexible and ductile ECC link slab reinforced with FRP. Constr Build Mater 166:694–71110.1016/j.conbuildmat.2018.01.188 ↗
27. Zhong JF, Shen JY, Wang W, Shi J, Yang XC, Zhou GC (2019) Working state of ECC link slabs used in continuous bridge decks. Appl Sci Basel 21:466710.3390/app9214667 ↗
28. Lepech MD, Li VC (2006) Long term durability performance of engineered cementitious composites. Restoration Build Monuments 12(2):119–13210.1515/rbm-2006-6038 ↗
29. Xue JQ, Briseghella B, Huang FY, Nuti C, Tabatabai H, Chen BC (2020) Review of ultra-high performance concrete and its application in bridge engineering. Constr Build Mater 260:11984410.1016/j.conbuildmat.2020.119844 ↗
30. Liu C, Zhang Y, Yao Y, Huang YH (2019) Calculation method for flexural capacity of high strain-hardening ultra-high performance concrete T-beams. Struct Concr 20(1):405–41910.1002/suco.201800151 ↗
31. Haikal G, Ramirez JA, Jahanshahi MR, Villamizar S, Abdelaleim O (2019) Link slab details and materials (Report No. FHWA/IN/JTRP-2019/10). Joint Transportation Research Program, West Lafayette10.5703/1288284316920 ↗
32. Doiron G, White P (2017) UHPC Link Slab Solutons in North America., RILEM-FibA FGC international symposium on ultra-high performance fibre-reinforced concrete (UHPFRC 2017). RILEM Publications S.A.R.L, Paris, pp 975–982
33. Hoomes LC, Ozyildirim HC, Brown MC (2017) Evaluation of high-performance fiber reinforced concrete for bridge deck connections, closure pours, and joints (Report No. FHWA/VTRC 17-R15). Virginia Transportation Research Council, Charlottesville
34. Graybeal B (2014) Design and construction of field-cast UHPC connections (Report No. FHWA-HRT-14-084). Federal Highway Administration, USA
35. Royce M (2016) Utilization of ultra-high performance concrete (UHPC) in New York. In: First international interactive symposium on UHPC–2016. Iowa State University, Des Moines, pp 1–910.21838/uhpc.2016.118 ↗
36. Graybeal B (2019) Design and construction of field-cast UHPC connections (Report No. FHWA-HRT-19-011). Federal Highway Administration, USA
37. Ministry of Transport of the People's Republic of China (2018) Code for design of highway reinforced concrete and prestressed concrete bridges and culverts (JTG 3362-2018). China Communications Press, Beijing (Chinese)