journal article·2021-02

A preliminary concrete mixture design based on fracture toughness

Ragip Ince, Abdullah Tevfik Bildik

Materials and Structures· Volume 54· Issue 1
Publisher page

Abstract

The calculations of the mixture design of concrete have been widely performed according to the compressive strength or tensile strength. However, a cracked concrete/reinforced concrete structure can only be simulated by using the principles of fracture mechanics. The purpose of this study is to obtain certain expressions based on the properties of the fresh concrete and the fracture toughness of concrete, which is the fundamental parameter in analysis of the cracked structures. In accordance with this aim, the concrete mixture design method with the monogram proposed by Monteiro et al. for cement-based materials was utilized. Accordingly, 28 sets of batches with different slump values, cement contents, and water/cement ratios were cast to obtain this monogram. Fracture toughness tests on the notched beams and wedge-splitting (WS) specimens, and compression and splitting tests on cubes were conducted for hardened concrete. The fracture toughness test results were analyzed according to the effective crack model (ECM) in concrete fracture. Consequently, a mix design approach with a monogram was proposed to design according to the fracture mechanics of concrete. Furthermore, an approach based on the WS test was initially suggested to determine the fracture toughness of concrete for the ECM, which was essentially based on beams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Abrams DA (1918) Design of concrete mixtures. Lewis Institute Bulletin 1
2. Lydon FD (1982) Concrete mix design, 2nd edn. Applied Science Publishers, Essex
3. Ince R, Alyamaç KE (2008) Determination of fracture parameters of concrete based on water–cement ratio. Indian J Eng Mater Sci 15:14–22
4. Beygi MHA, Kazemi MT, Nikbin IM, Amiri JV (2013) The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete. Mater Des 50:267–27610.1016/j.matdes.2013.02.018 ↗
5. Kaplan MF (1961) Crack propagation and the fracture of concrete. ACI J 58(11):591–610
6. Shah SP, McGarry FJ (1971) Griffith fracture criterion and concrete. J Eng Mech Div (ASCE) 97:1663–167510.1061/JMCEA3.0001523 ↗
7. Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Conc Res 6:773–78210.1016/0008-8846(76)90007-7 ↗
8. Bazant ZP, Oh BH (1983) Crack band theory for fracture of concrete. Mater Struct (RILEM) 16(3):155–177
9. Jenq YS, Shah SP (1985) Two-parameter fracture model for concrete. ASCE J Eng Mech 111(10):1227–124110.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
10. Nallathambi P, Karihaloo BL (1986) Determination of the specimen size independent fracture toughness of plain concrete. Mag Conc Res 38(135):67–7610.1680/macr.1986.38.135.67 ↗
11. Carpinteri A (1989) Cusp catastrophe interpretation of fracture instability. J Mech Phys Solids 37(5):567–58210.1016/0022-5096(89)90029-X ↗
12. Bazant ZP, Kazemi MT (1990) Determination of fracture energy, process zone length, and brittleness number from size effect with application to rock and concrete. Int J Fract 44(2):111–13110.1007/BF00047063 ↗
13. Carpinteri A (1994) Scaling laws and renormalization groups for strength and toughness of disordered materials. Int J Solids Struct 31(3):291–30210.1016/0020-7683(94)90107-4 ↗
14. Carpinteri A, Chiaia B (1997) Multifractal scaling laws in the breaking behaviour of disordered materials. Chaos, Solitons Fractals 8(2):135–15010.1016/S0960-0779(96)00088-4 ↗
15. Xu S, Reinhardt HW (1999) Determination of double-K criterion for crack propagation in quasi-brittle fracture, part I: experimental investigation of crack propagation. Int J Fract 98(2):111–14910.1023/A:1018668929989 ↗
16. Carpinteri A, Chiaia B, Cornetti P (2002) A scale-invariant cohesive crack model for quasi-brittle materials. Eng Fract Mech 69:207–21710.1016/S0013-7944(01)00085-6 ↗
17. Hu X, Duan K (2008) Size effect and quasi-brittle fracture: the role of FPZ. Int J Fract 154:3–1410.1007/s10704-008-9290-7 ↗
18. Carpinteri A, Corrado M (2009) An extended (fractal) overlapping crack model to describe crushing size-scale effects in compression. Eng Fail Anal 16:2530–254010.1016/j.engfailanal.2009.04.024 ↗
19. Carpinteri A, Accornero F (2019) Rotation versus curvature fractal scaling in bending failure. Phys Mesomech 22(1):46–5110.1134/S1029959919010089 ↗
20. Brühwiler E, Wittmann FH (1990) The wedge splitting test, a method of performing stable fracture tests. Eng Fract Mech 35:117–12610.1016/0013-7944(90)90189-N ↗
21. Gambhir ML (1993) Concrete technology, 4th edn. Tata Mc-Graw-Hill Publishing Company Limited, New Delhi
22. Tang T, Ouyang C, Shah SP (1996) A simple method for determining material fracture parameters from peak loads. ACI Mater J 93(2):147–157
23. Rocco C, Guinea GV, Planas J, Elices M (1999) Size effect and boundary condition in the Brazilian tests: theoretical analysis. Mater Struct 32:437–44410.1007/BF02482715 ↗
24. Ince R (2010) Determination of concrete fracture parameters based on two-parameter and size effect models using split-tension cubes. Eng Fract Mech 77:2233–225010.1016/j.engfracmech.2010.05.007 ↗
25. Ince R (2012) Determination of concrete fracture parameters based on peak-load method with diagonal split-tension cubes. Eng Fract Mech 82:100–11410.1016/j.engfracmech.2011.11.026 ↗
26. Ince R (2012) Determination of the fracture parameters of the Double-K model using weight functions of split-tension specimens. Eng Fract Mech 96:416–43210.1016/j.engfracmech.2012.08.024 ↗
27. Ince R (2017) The fracture mechanics formulas for split-tension strips. J Theor Appl Mech 55:607–61910.15632/jtam-pl.55.2.607 ↗
28. Ince R, Çetin S (2019) Effect of grading type of aggregate on fracture parameters of concrete. Mag Conc Res 71(16):860–86810.1680/jmacr.18.00095 ↗
29. Monteiro PJM, Helene PRL, Kang SH (1993) Designing concrete mixtures for strength, elastic modulus and fracture energy. Mater Struct 26:443–45210.1007/BF02472804 ↗
30. Helene PRL (1987) Contribuiçao ao estudo do controle e dosagem dos concretos de cimento Portland. PhD Thesis. Sao Paulo University
31. Lyse I (1932) Test on consistence and strength of concrete having constant water content. ASTM Proc 32(1):629–636
32. Alyamac KE, Ince R (2009) A preliminary concrete mix design for SCC with marble powders. Constr Build Mater 23:1201–121010.1016/j.conbuildmat.2008.08.012 ↗
33. Dewar JD (1999) Computer modeling of concrete mixtures, 1st edn. E & FN Spon Press, London10.4324/9780203031148 ↗
34. Shah SP, Swartz SE, Ouyang C (1995) Fracture mechanics of concrete: applications of fracture mechanics to concrete, rock and other quasi-brittle materials. Wiley, Canada
35. Karihaloo BL, Nallathambi P (1989) An improved effective crack model for the determination of fracture toughness of concrete. Cem Conc Res 19:603–61010.1016/0008-8846(89)90012-4 ↗
36. Karihaloo BL, Nallathambi P (1991) Notched beam test: mode I fracture toughness. In: Fracture Mechanics Test Methods for Concrete, (Edited by S.P. Shah and A. Carpinteri), RILEM, Chapman & Hall, London, pp 1–86
37. Karihaloo BL (1995) Fracture mechanics and structural concrete, 1st edn. Longman Scientific and Technical, Essex
38. ACI-318 (2002) Building code requirements for structural concrete and commentary. Farmington Hills, Michigan
39. Karihaloo BL, Nallathambi P (1990) Size-effect prediction from effective crack model for plain concrete. Mater Struct 23:178–18510.1007/BF02473016 ↗
40. Hillemeier B, Hilsdorf HK (1977) Fracture mechanics studies on concrete compounds. Cem Conc Res 7:523–53610.1016/0008-8846(77)90114-4 ↗
41. Rossi P, Brühwiler E, Chhuy S, Jenq YS, Shah SP (1991) Fracture properties of concrete as determined by means of wedge splitting tests and tapered double cantilever beam tests. In: Shah SP, Carpinteri A (eds) Fracture mechanics test methods for concrete. RILEM Chapman & Hall, London, pp 88–128
42. Srawley JE (1976) Wide range stress intensity factor expression for ASTM E399 standard fracture toughness specimens Int. J Fract 12:475–47610.1007/BF00032844 ↗
43. Bazant ZP, Becq-Giraudon E (2002) Statistical prediction of fracture parameters of concrete and implications for choice of testing standard. Cem Conc Res 32:529–55610.1016/S0008-8846(01)00723-2 ↗
44. Ince R (2004) Prediction of fracture parameters of concrete by artificial neural networks. Eng Fract Mech 71:2143–215910.1016/j.engfracmech.2003.12.004 ↗
45. Ince R (2010) Artificial neural network-based analysis of effective crack model in concrete fracture. Fatigue Fract Eng Mater Struct 33(9):595–60610.1111/j.1460-2695.2010.01469.x ↗
46. L’Hermite R (1955) Idées actuelles sur la technologie du béton. Documentation Technique Du Bâtiment Et Des Travaux Publics, Paris
47. Ince R, Gör M, Eren ME, Alyamaç KE (2015) The effect of size on the splitting strength of cubic concrete members. Strain 51(2):135–14610.1111/str.12127 ↗
48. Ince R, Gör M, Alyamaç KE, Eren ME (2016) Multi-fractal scaling law for split strength of concrete cubes. Magn Conc Res 68:141–15010.1680/macr.15.00070 ↗
49. Karihaloo BL, Nallathambi P (1990) Effective crack model for the determination of fracture toughness (KeIC) of concrete. Engng Fract Mech 35:637–64510.1016/0013-7944(90)90146-8 ↗
50. Montgomery DC, Runger GC (2013) Applied statistics and probability for engineers, 6th edn. Wiley, New York
51. Van Mier JGM (1997) Fracture processes of concrete, 1st edn. CRC Press, New York
52. Rong H, Dong W, Zhang X, Zhang B (2019) Size effect on fracture properties of concrete after sustained loading. Mater Struct 52:1610.1617/s11527-019-1326-0 ↗
53. Stephen SJ, Gettu R (2020) Fatigue fracture of fibre reinforced concrete in flexure. Mater Struct 53:5610.1617/s11527-020-01488-7 ↗
54. Masoud MA, Rashad AM, Sakr K, Shahien MG, Zayed AM (2020) Possibility of using different types of Egyptian serpentine as fine and coarse aggregates for concrete production. Mater Struct 53:8710.1617/s11527-020-01525-5 ↗