Compact tension test for fracture characterization of thin bonded asphalt overlay systems at low temperature
Source abstract
Abstract
Asphalt overlays provide an economical means for treating deteriorated pavements. Thin bonded overlay (TBO) systems have become popular options for pavement rehabilitation. In addition to functional improvements, these systems ensure a high degree of waterproofing benefits. Conventional asphalt concrete fracture tests were developed for pavements with homogeneous asphalt concrete mixtures, and typically their thicknesses exceed 50 mm (2 inch). The use of spray paver technology for construction of TBO leads to continuously varying asphalt binder content, up to approximately one-third of the layer thickness. Commonly utilized fracture test geometries for asphalt concrete include the single-edge notched beam, SEN[B], the disk-shaped compact tension, DC[T], and the semi-circular bend, SC[B]. The SEN[B] test geometry is not preferable for use in pavement systems due to difficulties in procuring beam samples from the field. Applications of the other established test geometries, the DC[T] and SC[B] tests, are limited because of the material nonhomogeneity caused by nonuniform distribution of asphalt binder and smaller as-constructed thicknesses of TBO, which are usually less than 25 mm (1 inch) for gap-graded and 50 mm (2 inch) for dense-graded hot mix asphalt (HMA) mixtures. Both the DC[T] and SC[B] tests simulate movement of the crack fronts in transverse or longitudinal directions in the pavement. Use of these tests on field-procured samples of TBO yields a crack front that encounters nonhomogeneous material through the specimen thickness. The crack moves perpendicular to the axis of material nonhomogeneity, which makes data interpretation and fundamental material fracture characterization challenging. In addition, the crack in the specimen is correlated to a crack channeling across the pavement width rather than a bottom-up or top-down direction, which is more desirable from the standpoint of coupling experimental results with currently available simulation models. This paper proposes a test procedure for fracture characterization of graded asphalt pavement systems that have significant material property gradients through their thicknesses. Suitable specimen geometry and testing procedures were developed using ASTM E399 and ASTM D7313-07b as a starting point. Laboratory tests were performed using an optimized compact tension, or C[T], test geometry for field cores as well as laboratory-fabricated composite specimens. Laboratory testing using the proposed procedure clearly showed distinction in the fracture characteristics for specimens prepared with varying material compositions. The capability of distinguishing different materials combined with stable crack growth makes the proposed testing procedure ideal for fracture characterization of thin and graded pavement systems. Statistical analysis of test data revealed that the proposed C[T] test procedure is capable of detecting differences in fracture energy results across a wide range of pavement systems and yields a low test variability. Finite element simulations of the test procedure further indicate the suitability of the test procedure as well as demonstrating a procedure for extraction of fundamental material properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Epoxy Resin Curing Processes · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Hicks RG, Moulthrop J, and Daleiden J (1999) Selecting a preventative maintenance treatment for flexible pavements. Transportation research record, vol 1680, TRB, National Research Council, Washington DC, pp 1–12
2. Moulthrop JS, and Smith RE (2000) State of the art and state of the practice in pavement maintenance. Transportation in the New Millennium: state of the art and future directions, perspectives from Transportation Research Board Standing Committees, TRB, National Research Council, Washington DC, 2000
3. Corley-Lay JB, and Mastin JN (2007) Ultrathin bonded wearing course as pavement preservation treatment for jointed concrete pavement. Transportation research record, vol 2005, TRB, National Research Council, Washington DC, pp 11–1710.3141/2005-02 ↗
4. Hanson DI (2001) Construction and performance of ultrathin bonded hot-mix asphalt wearing course. Transportation research record, vol 1749 TRB, National Research Council, Washington DC, pp 53–5910.3141/1749-08 ↗
5. Bellanger J, Brosseaud Y, and Gourdon JL (1992) Thinner and thinner asphalt layers for maintenance of french roads. Transportation research record, vol 1334 TRB, National Research Council, Washington DC, pp 9–11
6. Kandhal PS, and Lockett L (1997) Construction and performance of ultrathin asphalt friction course. National Center for Asphalt Technology, Auburn University, Auburn, NCAT Report No 97–5, 1997
7. Wagoner MP, Buttlar WG, Paulino GH, and Blankenship PB (2006) Laboratory testing suite for characterization of asphalt concrete mixtures obtained from field cores. Association of Asphalt Paving technologists -proceedings of the technical sessions 2006 annual meeting, association of Asphalt Paving technologist, vol 75, White Bear Lake, Savannah, pp 815–852
8. Dave EV, Braham AF, Buttlar WG, Paulino GH, and Zofka A (2008) Integration of laboratory testing, field performance data, and numerical simulations for the study of low-temperature cracking. Proceedings of the 6th RILEM international conference on cracking in pavements, Chicago, (eds) Al-Qadi IL, Scarpas T, and Loizos A, CRC Press Taylor and Francis Group, New York, pp 369–378 200810.1201/9780203882191.ch36 ↗
9. Dumas P, and Vecoven J (1993) processes of reducing reflective cracking: synthesis of laboratory tests. Proceedings of the 2nd RILEM conference on reflective cracking, Liege, (eds) Rigo JM, Francken L, and Degeimbre R, Taylor and Francis Group, Oxon, pp 220–226 1993
10. Nguyen M L, Sauzeat C, Di Benedetto H, and Wendling L (2008) Investigation of cracking in bituminous mixtures with a 4 point bending test. Proceedings of the 6th RILEM international conference on cracking in pavements, Chicago, (eds) Al-Qadi IL, Scarpas T, and Loizos A, CRC Press Taylor and Francis Group, New York, pp 283–293 2008
11. AASHTO T322-03 (2004) Standard test method for determining the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device. Standard specifications for transportation materials and methods of sampling and testing, 24 ed
12. AASHTO TP-10 (2001) Method for thermal stress restrained specimen tensile strength. AASHTO Provisional standards, American Association of State Highway and Transportation Officials, Washington DC, Interim (ed), April 2001
13. Zhou F, Hu S, Scullion T (2007) Development and verification of the overlay tester based fatigue cracking prediction approach. Association of Asphalt Paving technologists -proceedings of the technical sessions 2007 Annual Meeting, association of Asphalt Paving technologist, vol 76, White Bear Lake, San Antonio, pp 627–662
14. ASTM E399-90 (2008) Standard test method for plane-strain fracture toughness of metallic materials. Annual Book of ASTM Standards, vol 03.01, ASTM International, pp 443–473 2008
15. Manjoine MJ (1965) Biaxial Brittle fracture tests. Trans ASME J Basic Eng 1965:293–29810.1115/1.3650541 ↗
16. Wessel ET (1968) State of the art: the WOL specimen for KIC fracture toughness testing. Eng Fract Mech 1:77–10310.1016/0013-7944(68)90017-9 ↗
17. Collop AC, Sewell AJ, Thom NH (2004) Laboratory assessment of the resistance to crack propagation in high-stiffness asphalt materials. Proc Instn Mech Engrs Part C J Mech Eng Sci 218:55–6610.1243/095765004322847107 ↗
18. Wagoner MP, Buttlar WG, Paulino GH (2005) Development of a single-edge notched beam test for asphalt concrete mixtures. ASTM J Test Eval 33(6):452–46010.1520/JTE12579 ↗
19. Wagoner MP, Buttlar WG, Paulino GH (2005) Disk-shaped compact tension test for asphalt concrete fracture. Exp Mech 45:270–27710.1177/0014485105053205 ↗
20. Li X, Marasteanu MO, Iverson N, and Labuz JF (2006) Observation of crack propagation in asphalt mixtures with acoustic emission. Transportation research record, vol 1970, TRB, National Research Council, Washington DC, pp 171–17710.1177/0361198106197000118 ↗
21. Song SH, Wagoner MP, Paulino GH, Buttlar WG (2008) δ25 crack opening displacement parameter in cohesive zone models: experiments and simulations in asphalt concrete. Fatigue Fract Eng Mater Struct 31(10):850–85610.1111/j.1460-2695.2008.01272.x ↗
22. Fracture Mechanics Test Methods for Concrete (1991). RILEM Report 5 Chapman & Hall, London
23. Bazant ZP, Planas J (1998) Fracture and size effect in concrete and other quasibrittle materials. CRC Press, Boca Raton
24. ASTM D7313-07a (2011) Standard test method for determining the fracture energy of asphalt-aggregate mixtures using the disk-shaped compact tension geometry. Annual Book of ASTM Standards, vol 04.03, ASTM International, pp 975–981
25. Mamlouk MS, Witczak MW, Kaloush KE, Ho YS (2002) Effect of anisotropy on compressive and tensile properties of asphalt mixes. J Test Eval 30(5):432–43810.1520/JTE12334J ↗
26. Underwood S, Heidari AH, Guddati M, and Kim YR (2005) Experimental investigation of anisotropy in asphalt concrete. Transportation research record, vol 1929 Transportation Research Board of the National Academies, Washington DC, pp 238–24710.1177/0361198105192900128 ↗
27. Motola Y, Uzan J (2007) Anisotropy of field-compacted asphalt concrete material. J Test Eval 35(1):103–10510.1520/JTE100151 ↗
28. Wagoner MP, Braham AF (2008). Anisotropic Behavior of Hot-Mix Asphalt at Low Temperatures. Transportation Research Record, vol 2057, Transportation Research Board of the National Academies, Washington DC, 2008, pp 83–8810.3141/2057-10 ↗
29. ASTM D6925–09 Standard test method for preparation and determination of the relative density of Hot Mix Asphalt (HMA) specimens by means of the superpave gyratory compactor
30. Wagoner MP, Buttlar WG (2007) Influence of specimen size on fracture energy of asphalt concrete. Association of Asphalt Paving technologists–Proceedings of the technical sessions 2007 annual meeting, vol 76, Association of Asphalt Paving Technologist, White Bear Lake pp 332–361
31. Song SH, Paulino GH, Buttlar WG (2006) A bilinear cohesive zone model tailored for fracture of Asphalt Concrete considering viscoelastic bulk material. Eng Fract Mech 73(18):2829–284810.1016/j.engfracmech.2006.04.030 ↗
32. Song SH, Paulino GH, Buttlar WG (2008b) Influence of the cohesive zone model shape parameter on asphalt concrete fracture behavior. Multiscale and Functionally Graded Material 2006 (M&FGM 2006), (eds) Paulino GH, Pindera MJ, Dodds RH, Rochinha FE, Dave EV, and Chen L. AIP Conference Proceedings 973, Melville, pp 730–735 200810.1063/1.2896872 ↗
33. Ahmed S, Dave EV, Exline MK, and Buttlar WG (2010) Fracture properties of gap & dense graded thin bonded overlays. Association of Asphalt Paving technologists–proceedings of the technical sessions 2010 annual meeting, vol 79, Association of Asphalt Paving Technologist, White Bear Lake, pp 443–472