journal article·2013-12

Crumb rubber aggregate coatings/pre-treatments and their effects on interfacial bonding, air entrapment and fracture toughness in self-compacting rubberised concrete (SCRC)

Khalid Battal Najim, Matthew Robert Hall

Materials and Structures· Volume 46· Issue 12
Publisher page

Abstract

The interfacial-bonding, interfacial transition zone (ITZ), and porosity are regarded as the key factors affecting hardened concrete properties. The aim of this study was to experimentally improve the bonding between the rubber aggregate and cement paste by different methodologies including water washing, Na(OH) pre-treatment, and both cement paste and mortar pre-coating. All methods were assessed by determining mechanical and dynamic properties, then correlating this with ITZ porosity and interfacial gap void geometry, along with quantification of the fracture energy during micro crack propagation using fractal analysis. The results indicated that pre-coating the rubber by mortar gave the best results in terms of fracture toughness and energy absorption showing good agreement between observations made at both micro and macro scales.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Lia G, Stubblefieldb AM, Garricka G, Eggersc J (2004) Development of waste tire modified concrete. Cem Concr Res 34:2283–228910.1016/j.cemconres.2004.04.013 ↗
2. Bignozzi MS, Sandrolini F (2006) Tyre rubber waste recycling in self-compacting concrete. Cem Concr Res 36:735–73910.1016/j.cemconres.2005.12.011 ↗
3. Turatsinze A, Bonnet S, Granju JL (2005) Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres. Build Environ 40:221–22610.1016/j.buildenv.2004.05.012 ↗
4. Ganjian E, Khorami M, Maghsoudi AA (2009) Scrap-tyre-rubber replacement for aggregate and filler in concrete. Constr Build Mater 23:1828–183610.1016/j.conbuildmat.2008.09.020 ↗
5. Najim KB, Hall MR (2010) A review of the fresh/hardened properties and applications for plain (PRC) and self-compacting rubberised concrete (SCRC). Constr Build Mater 24:2043–205110.1016/j.conbuildmat.2010.04.056 ↗
6. Ozbay E, Lachemi M, Sevim UK (2011) Compressive strength, abrasion resistance and energy absorption capacity of rubberized concretes with and without slag. Mater Struct 44:1297–130710.1617/s11527-010-9701-x ↗
7. Taha MMR, Asce M, El-Dieb AS, Abd El-Wahab MA, Abdel-Hameed ME (2008) Mechanical, fracture, and microstructural investigations of rubber concrete. J Mater Civ Eng 20(10):640–64910.1061/(ASCE)0899-1561(2008)20:10(640) ↗
8. MMR Taha, AS El-Dieb, MA Abd El-Wahab (2003) Fracture toughness of concrete incorporating rubber tire particles. In: International conference on performance of construction materials. pp 129–138
9. Khaloo AR, Dehestani M, Rahmatabadi P (2008) Mechanical properties of concrete containing a high volume of tire-rubber particles. Waste Manage 28:2472–248210.1016/j.wasman.2008.01.015 ↗
10. Erhan G (2010) Fresh properties of self-compacting rubberized concrete incorporated with fly ash. Mater Struct 43:1037–104810.1617/s11527-009-9564-1 ↗
11. Zheng L, Huo XS, Yuan Y (2008) Experimental investigation on dynamic properties of rubberized concrete. Constr Build Mater 22:939–94710.1016/j.conbuildmat.2007.03.005 ↗
12. Kosmatka SH, Kerkhoff B, Panarese WC (2002) Design and control of concrete mixtures, Portland Cement Association
13. Güneyisi E, Gesoglu M, Özturan T (2004) Properties of rubberized concretes containing silica fume. Cem Concr Res 34:2309–231710.1016/j.cemconres.2004.04.005 ↗
14. Erhan G, Mehmet G (2007) Strength development and chloride penetration in rubberized concretes with and without silica fume. Mater Struct 40:953–96410.1617/s11527-007-9279-0 ↗
15. Khatib KZ, Bayomy FM (1999) Rubberized portland cement concrete. J Mater Civ Eng 11:206–21310.1061/(ASCE)0899-1561(1999)11:3(206) ↗
16. Wong SF, Ting S-K (2009) Use the recycled rubber tires in normal and high-strength concretes. ACI Mater J 106:325–332
17. Sukontasukkul P (2009) Use of crumb rubber to improve thermal and sound properties of pre-cast concrete panel. Constr Build Mater 23:1084–109210.1016/j.conbuildmat.2008.05.021 ↗
18. Cairns R, Kew HY, Kenny MJ (2004) The use of recycled rubber tyres in concrete construction, final report. The University of Strathclyde, Glasgow
19. Fattuhi NI, Clark LA (1996) Cement-based materials containing shredded scrap truck tyre rubber. Constr Build Mater 10:229–23610.1016/0950-0618(96)00004-9 ↗
20. Uygunoglu T, Topçu IB (2010) The role of scrap rubber particles on the drying shrinkage and mechanical properties of self-consolidating mortars. Constr Build Mater 24:1141–115010.1016/j.conbuildmat.2009.12.027 ↗
21. Topçu IB, Bilir T (2009) Experimental investigation of some fresh and hardened properties of rubberized self-compacting concrete. Mater Des 30:3056–306510.1016/j.matdes.2008.12.011 ↗
22. Turatsinze A, Garros M (2008) On the modulus of elasticity and strain capacity of self-compacting concrete incorporating rubber aggregates. Resour Conserv Recycl 52:1209–121510.1016/j.resconrec.2008.06.012 ↗
23. Scrivener KL (2004) Backscattered electron imaging of cementitious microstructures: understanding and quantification. Cement Concr Compos 26:935–94510.1016/j.cemconcomp.2004.02.029 ↗
24. Najim KB, Hall M (2012) Mechanical and dynamic properties of self-compacting crumb rubber modified concrete. Constr Build Mater 27:521–53010.1016/j.conbuildmat.2011.07.013 ↗
25. Neville AM (1995) Properties of concrete, 3rd edn. Longman, London
26. Poon CS, Shui ZH, Lam L (2004) Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Constr Build Mater 18:461–46810.1016/j.conbuildmat.2004.03.005 ↗
27. Emiroglu M, Halidun M, Yildiz S (2007) An investigation on ITZ microstructure of the concrete containing waste vehicle tire. In: 8th international fracture conference, Istanbul
28. Segre N, Joekes I (2000) Use of tire rubber particles as addition to cement paste. Cem Concr Res 30:1421–142510.1016/S0008-8846(00)00373-2 ↗
29. Li F, Li Z, Li J (1998) Properties of concrete incorporating rubber tyre particles. Mag Concr Res 50:297–30410.1680/macr.1998.50.4.297 ↗
30. Rostami H, Lepore J, Silverstraim T, Zandi I (1993) Use of recycled rubber tyres in concrete. In: International conference concrete, University of Dundee
31. BS 1881-114 (1983) Method for determination of density of hardened concrete, British Standard Institute, London
32. BS 1881-116 (1983) Method for determination of compressive strength of concrete cubes, British Standard Institute, London
33. BS 1881-117 (1983) Method for determination of tensile splitting strength, British Standard Institution, London
34. ASTM C1018 (1997) Standard test method for flexural toughness and first-crack strength of fibre-reinforced concrete, American Society for Testing and Materials
35. BS 1881-121 (1983) Method of determination of static modulus of elasticity in compression, British Standard Institution, London
36. BS 1881-209 (1990) Recommendations for the measurement of dynamic modulus of elasticity, British Standard Institution, London
37. BS 1881-203 (1986) Recommendations for measurement of velocity of ultrasonic pulses in concrete, British Standard Institution, London
38. BS 1881: part 5 (1970) Methods of testing hardened concrete for other than strength, British Standard Institution, London
39. Manual, ERUDITE Resonant frequency tester 1975: London
40. Zainalabdin R, Al-Sammaray MA (2000) Concrete non-destructive tests, 1st edn. Alsharqa University, Alsharqa
41. Yan L, Jenkinsb CH, Pendleton RL (2000) Polyolefin fibre-reinforced concrete composites. Part I. Damping and frequency characteristics. Cem Concr Res 30:391–40110.1016/S0008-8846(99)00267-7 ↗
42. Cole DG (1966) The damping capacity of hardened cement paste, mortar and concrete specimens, In: Symposium on vibration in civil engineering, Butterworth, London, pp 235–247
43. Bascoul A, Turatsinze A (1997) Microscopical characterisation of mode I crack opening in mortar. Mater Struct 27:71–7810.1007/BF02472824 ↗
44. Garros M, Turatsinze AA, Granju JL (2006) Effect of rubber aggregate from grinding of end-of-life tires on the properties of SCC. ACI Special Publ 235:177–187
45. Sukontasukkul P, Pomchiengpin W, Songpiriyakij S (2010) Post-crack (or post-peak) flexural response and toughness of fibre reinforced concrete after exposure to high temperature. Constr Build Mater 24:1967–197410.1016/j.conbuildmat.2010.04.003 ↗
46. Leemann A, Beat M, Philippe G, Lorenz H (2006) Influence of compaction on the interfacial transition zone and the permeability of concrete. Cem Concr Res 36:1425–143310.1016/j.cemconres.2006.02.010 ↗
47. Erdem S, Dawson AR, Thom NH (2011) Microstructure-linked strength properties and impact response of conventional and recycled concrete reinforced with steel and synthetic macro fibres. Constr Build Mater 25:4025–403610.1016/j.conbuildmat.2011.04.037 ↗
48. Illston JM, Domone PL (2001) Construction materials: their nature and behaviour, 3rd edn. Spon Press, New York10.4324/9780203478981 ↗
49. Yu B, Liu W (2004) Fractal analysis of permeabilities for porous media. AIChE J 50:46–5710.1002/aic.10004 ↗
50. Li-Ping G, Zheng SW, Chen KR, Liu HJ (2007) Study on the flexural fatigue performance and fractal mechanism of concrete with high proportions of ground granulated blast-furnace slag. Cem Concr Res 37:242–25010.1016/j.cemconres.2006.11.009 ↗
51. Carpinteri A, Spagnoli A (2004) A fractal analysis of size effect on fatigue crack growth. Int J Fatigue 26:125–13310.1016/S0142-1123(03)00142-7 ↗
52. Benazzouk A, Douzane O, Langlet T, Mezreb K, Roucoult JM, Quéneudec M (2007) Physico-mechanical properties and water absorption of cement composite containing shredded rubber wastes. Cement Concr Compos 29:732–74010.1016/j.cemconcomp.2007.07.001 ↗
53. Jones R, Welch GB (1967) The damping properties of plain concrete: effect of composition and relations with elasticity and strength, Road Research Laboratory, Ministry of Transport Australia
54. BS 8500-2 (2006) Concrete: complementary British Standard to BS EN 206-1: part 2: specification for constituent materials and concrete. British Standard Institution, London