Stress-strain characteristic of SFRC using recycled fibres
Source abstract
Abstract
This paper presents work from a comprehensive study on the development of a flexural design framework for concrete reinforced with steel fibres that are recovered from used tyres. The experimental flexural behaviour of notched concrete prisms reinforced with these fibres is initially presented. For comparison purposes, prisms reinforced with industrially produced fibres are also considered. An attempt to adopt an existing RILEM design framework to derive appropriate tensile stress-strain blocks is made, but problems are identified with key parameters of the framework. The influence of crack propagation and location of neutral axis depth on the tensile stress distribution is examined. Following an analytical study, it is concluded that the uniaxial stress-strain model, proposed by RILEM overestimates the load-carrying capacity and should be modified by utilising more advanced analytical techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. European Commission (1999) Council Directive of 26 April 1999 on the landfill of waste. Official Journal of the European Communities L182: 1–19.
2. Pilakoutas K Strube R, (2001) Reuse of tyre fibres in concrete, in Recycling and Reuse of Used Tyres, Proceedings of the International Symposium, Dundee, Mar. 2001 (Thomas Telford Ltd, London), 225–236.
3. Tlemat H, Pilakoutas K, Neocleous K (2003) Pullout behaviour of steel fibres recycled from used tyres’, in ‘Role of Concrete in Sustainable Development, Proceedings of International Symposia on Celebrating Concrete: People and Practice, Dundee, Sept. 2003 (Thomas Telford Ltd, London), 175–184.10.1680/rocisd.32477.0017 ↗
4. Tlemat H, Pilakoutas K, Neocleous K (2003) Flexural toughness of SFRC made with fibres extracted from tyres, in Recycling and Reuse of Waste Materials, Proceedings of International Symposium on Advances in Waste Management and Recycling, Dundee, Sept. 2003 (Thomas Telford Ltd, London), 365–374.
5. Tlemat H (2004) Steel fibres from waste tyres to concrete: Testing, modelling and design. PhD thesis, (Dept. of Civil and Structural Engineering, The University of Sheffield, UK).
6. RILEM TC 162-TDF (2002) Test and design methods for steel fibre reinforced concrete: bending test. Materials and Structures 35(253): 579–582.10.1617/13884 ↗
7. RILEM TC 162-TDF (2000) Test and design methods for steel fibre reinforced concrete: σ-ɛ design method, Materials and Structures 33(226): 75–81.
8. RILEM TC 162-TDF (2003) Test and design methods for steel fibre reinforced concrete, σ-ɛ design method. Final recommendation, Materials and Structures 36(262): 560–567.10.1617/14007 ↗
9. Barr B, Lee MK (2002) Definition of round robin test, preparation of specimens. Execution and evaluation of round robin testing, final report of Sub-task 2.1 and 2.2, Brite-Euram project BRPR-CT98-0813: Test and Design Methods for Steel Fibre Reinforced Concrete, Project funded by the European Community under the Industrial and Materials Technologies Programme(Brite-Euram II)
10. Timoshenko SP (1970) Goodier JN Theory of Elasticitys, 3rd Edn. (McGraw Hill, New York).
11. AMAT (2003) Advanced molecular agitation technology, (Internet Site: www.amat-ltd.com).
12. Japan Society of Civil Engineers (1994) Recommendation for design and construction of steel fibre reinforced concrete, Concrete Library of JSCE VI (Article 15).
13. Copalaratnam VS, Gettu R (1995) On the characterisation of flexural toughness in FRC. Cement Concrete Composites 17:249–254.
14. Japan Society of Civil Engineers-SF4 (1994) Methods of tests for flexural strength and flexural toughness of steel fibre reinforced concrete, Concrete Library of JSCE, 58–61.10.1520/CCA10229J ↗
15. British Standards Institution (1996) BS 12 - British standard for concrete: method for determination of compressive strength of concrete cubes, (British Standards Institute, London).
16. European Committee for Standardisation (1992) Eurocode 2 - EVV 1992-1-1- Design of concrete structures-Part 1: General rules and rules for buildings, (British Standards Institute, London).
17. Ulfkjaer J, Krenk S, Brincker R (1995) Analytical model for fictitious crack propagation in concrete beam. Journal of Engineering Mechanics ASCE 121(1): 7–15.10.1061/(ASCE)0733-9399(1995)121:1(7) ↗
18. Olesen JF (2001) Fictitious crack propagation in fibre-reinforced concrete beams, Journal of Engineering Mechanics ASCE 127(3): 272–280.10.1061/(ASCE)0733-9399(2001)127:3(272) ↗
19. Schnuetgen B, Dams S (1994) Stahlfaser im Tunnelbau, Beton-informationen Heft 5(94), (Beton-Verlag, Duesseldor).
20. DVB (1995) Basis for evaluation of steel fibre concrete for use in industrial floors, Deutschen Beton Vereins 258–272, only available in German.
21. Barr B, Lee MK (2002) Definition of round robin test, preparation of specimens, execution and evaluation of round Robin testing - report of subtasks 2.1 and 2.2, Brite-Euram project BRPR-CT98-0813: Test and Design Methods for Steel Fibre Reinforced Concrete, Project funded by the European Community under the Industrial and Materials Technologies Programme (Brite-Euram II).
22. Hemmy O (2002) Recommendations for finite element analysis of FRC – report of subtask 3.5, Brite-Euram project BRPR-CT98-0813: Test and Design Methods for Steel Fibre Reinforced Concrete, Project funded by the European Community under the Industrial and Materials Technologies Programme (Brite-Euram II).
23. Dupont D, Vandewalle L (2002) Recommendations for finite element analysis of FRC – report of subtask 3.5, Brite-Euram project BRPR-CT98-0813: Test and Design Methods for Steel Fibre Reinforced Concrete, Project funded by the European Community under the Industrial and Materials Technologies Programme (Brite-Euram II).
24. Dupont D, Vandewalle L (2002) A practical proposal to drive a stress-strain relation with residual tensile strengths – annex 5.1.3, Brite-Euram project BRPR-CT98-0813: Test and Design Methods for Steel Fibre Reinforced Concrete, Project funded by the European Community under the Industrial and Materials Technologies Programme (Brite-Euram II).
25. Resplendino J, Petitjean J French (2003) recommendations for ultra-high performance fibre-reinforced concretes, in Test and Design Methods for Steel Fibre Reinforced Concrete –Background and Experiences, Proceedings of the RILEM TC 162-TDF Workshop, Bochum, March 2003, (RILEM Publications SARL, Bagneux).
26. Bazant ZP, Pijaudier-Cabot G (1989) Measurement of characteristic length of non-local continuum. Journal of Engineering Mechanics (ASCE) 115(4): 755–767.10.1061/(ASCE)0733-9399(1989)115:4(755) ↗
27. Hibbitt, Karlsson and Sorensen Inc (2000) Abaqus User's Manual, Vol. II, Version 6.1, PP 11.5.1.1–11.5.1.14 (USA).