journal article·2020-08

Experimental analysis of nailed LBL-to-LBL connections loaded parallel to grain

Guo Chen, Hao Jiang, Yun-fei Yu, Tong Zhou, Jing Wu, Xiang Li

Materials and Structures· Volume 53· Issue 4
Publisher page

Abstract

Laminated bamboo lumber (LBL) has become increasingly popular in recent years attributed to its superior mechanical properties compared to wood. The nailed LBL-to-LBL connection comprised of LBL main member sandwiched between two LBL plates is introduced, which plays an essential role in the safe and reliability design of modern bamboo structures. A comprehensive study was conducted in order to determine effect of the parameters on load-slip behavior and failure modes of specimens loaded parallel to grain, including end distance, edge distance, row spacing, center-to-center spacing, number of lines and rows of nails. Three main failure modes were investigated in the experiments, namely bearing failure, splitting failure and row shear failure. Minimum requirements of end distance, edge distance, row spacing and center-to-center spacing in nailed connections were suggested to avoid brittle failures. Results showed that the strength of a multi-nail connection equal the strength of a single nail connection multiplied by an effective number of nails, which is smaller than the actual number of nails. Furthermore, the Foschi formula used to model wood connections can also predict the full process failure of LBL nailed connections and were in good agreement with experimental results. The provided experimental results are motivation for development of design and analytical modes of LBL structures containing nailed LBL-to-LBL connections.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Wood Treatment and Properties · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Xiao Y, Yang RZ, Shan B (2013) Production, environmental impact and mechanical properties of glubam. Constr Build Mater 44:765–77310.1016/j.conbuildmat.2013.03.087 ↗
2. Tian LM, Kou YF, Hao JP (2019) Axial compressive behaviour of sprayed composite mortar-original bamboo composite columns. Constr Build Mater 215:726–73610.1016/j.conbuildmat.2019.04.234 ↗
3. Xu QF, Leng YB, Chen X, Harries KA, Chen LZ, Wang ZL (2018) Experimental study on flexural performance of glued-laminated-timber-bamboo beams. Mater Struct 51:910.1617/s11527-017-1135-2 ↗
4. Khoshbakht N, Clouston PL, Arwade SR, Schreyer AC (2018) Computational modeling of laminated veneer bamboo dowel connections. J Mater Civ Eng 30(2):0401728510.1061/(ASCE)MT.1943-5533.0002135 ↗
5. Li HT, Wu G, Zhang QS, Deeks AJ, Su JW (2018) Ultimate bending capacity evaluation of laminated bamboo lumber beams. Constr Build Mater 160:365–37510.1016/j.conbuildmat.2017.11.058 ↗
6. Xu M, Cui ZY, Tu LH, Xia QL, Chen ZF (2019) The effect of elevated temperatures on the mechanical properties of laminated bamboo. Constr Build Mater 226:32–4310.1016/j.conbuildmat.2019.07.274 ↗
7. Wei Y, Tang SF, Ji XW, Zhao K, Li GF (2020) Stress-strain behavior and model of bamboo scrimber under cyclic axial compression. Eng Struct 209:11027910.1016/j.engstruct.2020.110279 ↗
8. Chen G, Yu YF, Li X, He B (2020) Mechanical behavior of laminated bamboo lumber for structural application: an experimental investigation. Eur J Wood Wood Prod 78(1):53–6310.1007/s00107-019-01486-9 ↗
9. Feio AO, Lourenço PB, Machado JS (2014) Testing and modeling of a traditional timber mortise and tenon joint. Mater Struct 47:213–22510.1617/s11527-013-0056-y ↗
10. Zhang J, Xu YX, Mei F (2018) Experimental study on the fire performance of straight-line dovetail joints. J Wood Sci 64(3):193–20810.1007/s10086-018-1694-z ↗
11. Myslicki S, Vallée T, Walther F (2016) Short-time procedure for fatigue assessment of beech wood and adhesively bonded beech wood joints. Mater Struct 49(6):2161–217010.1617/s11527-015-0640-4 ↗
12. Ling ZB, Liu WQ, Yang HF, Chen X (2018) Modelling of glued laminated timber joints with glued-in rod considering bond-slip location function. Eng Struct 176:90–10210.1016/j.engstruct.2018.08.098 ↗
13. Khelifa M, Khennane A, El Ganaoui M, Celzard A (2016) Numerical damage prediction in dowel connections of wooden structures. Mater Struct 49(5):1829–184010.1617/s11527-015-0615-5 ↗
14. Li Z, Xiao Y, Wang R, Monti G (2015) Studies of nail connectors used in wood frame shear walls with ply-bamboo sheathing panels. J Mater Civil Eng 27(7):0401421610.1061/(ASCE)MT.1943-5533.0001167 ↗
15. Kirkham WJ, Gupta R, Miller TH (2014) State of the art: seismic behavior of wood-frame residential structures. J Struct Eng 140(4):0401309710.1061/(ASCE)ST.1943-541X.0000861 ↗
16. Gatóo A, Sharma B, Bock M, Mulligan H, Ramage M (2014) Sustainable structures: bamboo standards and building codes. P I Civil Eng-Eng Su 167(5):189–196
17. Hong CK, Li HT, Xiong ZH, Lorenzo R, Corbi I, Corbi O, Wei DD, Yuan CG, Yang D, Zhang HZ (2020) Review of connections for engineered bamboo structures. J Build Eng 30:10132410.1016/j.jobe.2020.101324 ↗
18. Breyer DE, Fridley KJ, Cobeen KE, Pollock DG (1993) Design of Wood Structures-ASD/LRFD. McGraw-Hill, New York
19. Porteous A, Kermani A (2005) Fully overlapping nailed joints with steel gussets in timber structures. J Struct Eng 131(5):806–81510.1061/(ASCE)0733-9445(2005)131:5(806) ↗
20. Piazza M, Polastri A, Tomasi R (2011) Ductility of timber joints under static and cyclic loads. P I Civil Eng-Str B 164(2):79–90
21. Lau Peter WC (1992) Rationalizing spacing requirements for nailed wood connections by induced wood splitting. Can J Civil Eng 19(5):842–84610.1139/l92-095 ↗
22. Robert J, Gerhard F, Jochen K (2018) Assessment of the failure behaviour and reliability of timber connections with multiple dowel-type fasteners. Eng Struct 172:76–8410.1016/j.engstruct.2018.05.081 ↗
23. Xu BH, Bouchaïr A, Taazount M, Vega EJ (2009) Numerical and experimental analyses of multiple-dowel steel-to-timber joints in tension perpendicular to grain. Eng Struct 31:2357–236710.1016/j.engstruct.2009.05.013 ↗
24. Smith I, Whale LRJ, Anderson C, Hilson BO, Rodd PD (2011) Design properties of laterally loaded nailed or bolted wood joints. Can J Civil Eng 15(4):633–64310.1139/l88-085 ↗
25. Mascia NT, Santana CLDO (2009) Remarks on the slip modulus of nailed connections for linear analysis of plywood timber beams. Constr Build Mater 23(8):2731–273710.1016/j.conbuildmat.2009.02.037 ↗
26. Foschi RO (1974) Load-slip characteristics of nails. Wood Sci 7(1):69–76
27. Folz B, Filiatrault A (2001) Cyclic analysis of wood shear walls. J Struct Eng 127(4):433–44110.1061/(ASCE)0733-9445(2001)127:4(433) ↗
28. Hong JP, Barrett D (2010) Three-dimensional finite-element modeling of nailed connections in wood. J Struct Eng 136:715–72210.1061/(ASCE)ST.1943-541X.0000160 ↗
29. Meghlat EM, Oudjene M, Aitaider H, Batoz JL (2013) A new approach to model nailed and screwed timber joints using the finite element method. Constr Build Mater 41:263–26910.1016/j.conbuildmat.2012.11.068 ↗
30. ASTM D143-14 (2014) Standard test methods for small clear specimens of timber. American society for testing and materials (ASTM), West Conshohocken, USA
31. ASTM D5764-97a (2018) Standard test method for evaluating dowel-bearing strength of wood and wood-based products. American society for testing and materials (ASTM), West Conshohocken, USA
32. Ramírez F, Correal JF, Yamin LE, Atoche JC, Piscal CM (2012) Dowel-bearing strength behavior of glued laminated guadua bamboo. J Mater Civil Eng 24(11):1378–138710.1061/(ASCE)MT.1943-5533.0000515 ↗
33. ASTM F1575-17 (2017) Standard test method for determining bending yield moment of nails. American society for testing and materials (ASTM), West Conshohocken, USA
34. Reynolds T, Sharma B, Harries K, Ramage M (2016) Dowelled structural connections in laminated bamboo and timber. Compos B Eng 90:232–24010.1016/j.compositesb.2015.11.045 ↗
35. Wanyama OG, Sawata K, Hirai T, Koizumi A, Sasaki Y (2012) Effective lateral resistance of timber–plywood–timber joints connected with nails. J Wood Sci 58(4):315–32110.1007/s10086-012-1250-1 ↗
36. ASTM D1761-12 (2012) Standard test methods for mechanical fasteners in wood. American society for testing and materials (ASTM), West Conshohocken, USA
37. Johnsson H, Stehn L (2004) Plug shear failure in nailed timber connections. Holz Roh Werkst 62:455–46410.1007/s00107-004-0523-9 ↗
38. Lantos G (1969) Load distribution in a row of fasteners subjected to lateral load. Wood Sci 1(3):129–139
39. American Forest Paper Association (AF&PA) (2006) Commentary on the national design specification for wood construction, 2005th edn. AF&PA, Washington DC
40. Cabrero JM, Yurrita M (2018) Performance assessment of existing models to predict brittle failure modes of steel-to-timber connections loaded parallel-to-grain with dowel-type fasteners. Eng Struct 171:895–91010.1016/j.engstruct.2018.03.037 ↗
41. ASTM D5652-15 (2015) Standard test methods for single-bolt connections in wood and wood-based products. American society for testing and materials (ASTM), West Conshohocken, USA
42. Jorissen A (1998) Double shear timber connections with dowel type fasteners. Dissertation, Delft University.
43. Swiss Society of Engineers and Architects (2012) Standard SIA 265 - Timber Structures 2012: Swiss Society of Engineers and Architects, Zurich, Switzerland
44. European Committee for Standardization CEN (2004) EN 1995-1-1: Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings, 2004, CEN, Bruxelles, Belgium
45. Verdret Y, Faye C, Elachachi SM, Le Magorou L, Garcia P (2015) Experimental investigation on stapled and nailed connections in light timber frame walls. Constr Build Mater 91:260–27310.1016/j.conbuildmat.2015.05.052 ↗
46. Johansen KW (1949) Theory of timber connectors. Publication No. 9, International association of bridges and structural engineering, Bern, Switzerland, pp. 249–262.
47. Smith I, Craft ST, Quenneville P (2011) Design capacities of joints with laterally loaded nails. Can J Civil Eng 28(2):282–29010.1139/l00-088 ↗
48. Zheng W, Lu WD, Liu WQ, Wang L, Lin ZB (2015) Experimental investigation of laterally loaded double-shear-nail connections used in midply wood shear walls. Constr Build Mater 101:761–77110.1016/j.conbuildmat.2015.10.100 ↗