Enhanced adsorption and properties of TPEG-type superplasticizers modified by maleic anhydride: a perspective from molecular architecture and conformation
Source abstract
Abstract
A series of polycarboxylate superplasticizers (PCEs) with varying carboxyl densities were synthesized at room temperature using the molecular design principle. The PCEs molecular structure was determined using 1H NMR and MALDI-TOF. The paste fluidity, foam stability as well as other performance of PCEs obtained was also tested. The investigations reveal that the PCEs with high carboxyl density cause the extended main chain conformation due to the strong electrostatic repulsion, resulting in the increase of hydrodynamic radius (Rh), which is beneficial to increase the ‘accessible carboxyl’ in the main chain, and improves its adsorption capacity; In addition, the PCEs with high carboxyl density also have high hydrophilicity, which will form micro bubbles to better disperse cement particles, and improve the fluidity of cement pastes. This study is aimed to provide a comprehensive understand for the mechanism of maleic anhydride-modified TPEG-type PCEs from the viewpoint of molecular architecture and conformation, and improve the workable performance of concrete mixture with the PCEs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Polymer Nanocomposites and Properties · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Srinivasan S, Barbhuiya SA, Charan D, Pandey SP (2010) Characterising cement–superplasticiser interaction using Zeta potential measurements. Constr Build Mater 24(12):2517–252110.1016/j.conbuildmat.2010.06.005 ↗
2. Plank J, Vlad D, Brandl A, Chatziagorastou P (2005) Colloidal chemistry examination of the steric effect of polycarboxylate superplasticisers. Cem Int 3:100
3. Lei L, Plank J (2014) Synthesis and properties of a vinyl ether-based polycarboxylate superplasticizer for concrete possessing clay tolerance. Ind Eng Chem Res 53(3):1048–105510.1021/ie4035913 ↗
4. Yamada K, Takahashi T, Hanehara S, Matsuhisa M (2000) Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer. Cem Concr Res 30(2):197–20710.1016/S0008-8846(99)00230-6 ↗
5. Winnefeld F, Becker S, Pakusch J, Götz T (2007) Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems. Cem Concr Compos 29(4):251–262.10.1016/j.cemconcomp.2006.12.006 ↗
6. David R, Thierry H, Christian G, Franck D, Roger S, Sébastien G, Martin M, Philippe M (2009) RAFT copolymerization of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate in the presence of a hydrophobic chain transfer agent in organic solution and in water. J Polym Sci A Polym Chem 47(12):3045–305510.1002/pola.23374 ↗
7. Becer CR, Hahn S, Fijten MWM, Thijs HML, Hoogenboom R, Schubert US (2008) Libraries of methacrylic acid and oligo (ethylene glycol) methacrylate copolymers with LCST behavior. J Polym Sci A Polym Chem 46(21):7138–714710.1002/pola.23018 ↗
8. Jansen D, Goetz-Neunhoeffer F, Neubauer J, Haerzschel R, Hergeth WD (2013) Effect of polymers on cement hydration: a case study using substituted PDADMA. Cem Concr Compos 35(1):71–7710.1016/j.cemconcomp.2012.08.022 ↗
9. Lu SH, Liu G, Ma YF, Li F (2010) Synthesis and application of a new vinyl copolymer superplasticizer. J Appl Polym Sci 117(1):273–28010.1002/app.31984 ↗
10. Łaz´niewska-Piekarczyk B (2012) Influence of selected new generation admixtures on the workability air-voids parameters and frost-resistance of self compacting concrete. Constr Build Mater 31:310–31910.1016/j.conbuildmat.2011.12.107 ↗
11. Plank J, Pöllmann K, Zouaoui N, Andres PR, Schaefer C (2008) Synthesis and performance of methacrylic ester based polycarboxylate superplasticizers possessing hydroxy terminated poly (ethylene glycol) side chains. Cem Concr Res 38:1210–121610.1016/j.cemconres.2008.01.007 ↗
12. Yamada K, Ogawa S, Hanehara S (2001) Controlling of the adsorption and dispersing force of polycarboxylate-type superplasticizer by sulfate ion concentration in aqueous phase. Cem Concr Res 31(3):375–38310.1016/S0008-8846(00)00503-2 ↗
13. Janowska-Renkas E (2013) The effect of superplasticizers’ chemical structure on their efficiency in cement pastes. Constr Build Mater 38:1204–121010.1016/j.conbuildmat.2012.09.032 ↗
14. Liu M, Zhang L, Yan SL, Ye Z (2020) Study on synthesis and properties of polycarboxylic acid superplasticizer modified by maleic acid phosphate. Constr Build Mater 47(12):148–152
15. Orozco CA, Chun BW, Geng G, Emwas AH, Monteiro PJ (2017) Characterization of the bonds developed between calcium silicate hydrate and polycarboxylate-based superplasticizers with silyl functionalities. Langmuir 33:3404–341210.1021/acs.langmuir.6b04368 ↗
16. Chen J, Qiao M, Gao N, Wu JZ, Shan GC, Zhu BS, Ran QP (2021) Acrylate based post-acting polymers as novel viscosity modifying admixtures for concrete. Constr Build Mater 312:125414
17. Li YW, Yang CL, Zhang YF, Zheng J, Guo HL, Lu MG (2014) Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers. Constr Build Mater 64:324–33210.1016/j.conbuildmat.2014.04.050 ↗
18. Zhang LR, Kong XM, Xing F, Dong BQ, Wang F (2018) Working mechanism of post-acting polycarboxylate superplasticizers containing acrylate segments. J Appl Plym Sci 135(5):145753
19. Pourchet S, Liautaud S, Rinaldi D, Pocharda I (2012) Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate. Cem Concr Res 42(2):431–43910.1016/j.cemconres.2011.11.011 ↗
20. Zingg A, Winnefeld F, Holzer L, Pakusch J, Becker S, Figi R, Gauckler L (2009) Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts. Cem Concr Compos 31(3):153–16210.1016/j.cemconcomp.2009.01.005 ↗
21. Pourchet S, Comparet C, Nicoleau L, Nonat A (2007) Influence of polycarboxylate superplasticizers on tricalcium silicate hydration. In: Proceedings of the 12th International Congress on the Chemistry of Cement.
22. He Y, Zhang X, Shui L, Wang Y, Gu M, Wang X, Wang H, Peng L (2019) Effects of PCEs with various carboxylic densities and functional groups on the fluidity and hydration performances of cement paste. Constr Build Mater 202:656–66810.1016/j.conbuildmat.2018.12.216 ↗
23. Alonso M, Palacios M, Puertas F (2013) Compatibility between polycarboxylatebased admixtures and blended-cement pastes. Cem Concr Comp 35:151–16210.1016/j.cemconcomp.2012.08.020 ↗
24. Ran Q, Somasundaran P, Miao C, Liu J, Wu S, Shen J (2010) Adsorption mechanism of comb polymer dispersants at the cement/water interface. J Disper Sci Technol 31(6):790–79810.1080/01932690903333580 ↗
25. Ran Q, Wang X, Shu X, Zhang Q, Yang Y, Liu J (2016) Effects of sequence structure of polycarboxylate superplasticizers on the dispersion behavior of cement paste. J Disper Sci Technol 37(3):431–44110.1080/01932691.2015.1042585 ↗
26. Ran Q, Wang X, Jiang J, Yang Y (2016) Synthesis of block polycarboxylate copolymer and its application in a cement system. Adv Cem Res 28(3):202–20810.1680/jadcr.15.00055 ↗
27. Shu X, Ran Q, Liu J, Zhao H, Zhang Q, Wang X, Yang Y, Liu J (2016) Tailoring the solution conformation of polycarboxylate superplasticizer toward the improvement of dispersing performance in cement paste. Constr Build Mater 116:289–29810.1016/j.conbuildmat.2016.04.127 ↗
28. Brink M (2006) Imaging single-electron charging in nanostructures by low-temperature scanning force microscopy. Cornell University.
29. Hirata T, Ye J, Branicio P, Zheng J, Lange A, Plank J, Sullivan M (2017) Adsorbed conformations of PCE superplasticizers in cement pore solution unraveled by molecular dynamics simulations. Sci Rep 7(1):1659910.1038/s41598-017-16048-3 ↗
30. Hirata T, Branicio P, Ye J, Zheng J, Tomike Y, Lange A, Plank J, Sullivan M (2017) Atomistic dynamics simulation to solve conformation of model PCE superplasticisers in water and cement pore solution. Adv Cem Res 29(10):418–42810.1680/jadcr.16.00137 ↗
31. Tiemeyer C, Lange A, Plank J (2014) Determination of the adsorbed layer thickness of functional anionic polymers utilizing chemically modified polystyrene nanoparticles. Colloids Surf A 456:139–14510.1016/j.colsurfa.2014.05.014 ↗
32. Li H, Yang HY, Zhu PP, Zhu QR, Fang CG (2002) Poiseuille equation is used to determine the polyvinyl alcohol on the viscometer capillary tube wall adsorption layer thickness. J Funct Polym 15(3):319–324
33. Li XK, Zheng DF, Zheng T, Lin XL, Lou HM, Qiu XQ (2017) Enhancement clay tolerance of PCE by lignin-based polyoxyethylene ether in montmorillonite-contained paste. J Ind Eng Chem 49:168–17510.1016/j.jiec.2017.01.024 ↗
34. Feng H, Pan LS, Zheng Q, Li JC, Xu N, Pang SJ (2018) Effects of molecular structure of polycarboxylate superplasticizers on their dispersion and adsorption behavior in cement paste with two kinds of stone powder. Constr Build Mater 170:182–19210.1016/j.conbuildmat.2018.02.195 ↗
35. Li JL, Yang Y, Wang ZL, Chen L, Ren JG, Pei JK, Jia RL (2013) Copolymerization of allyl alcohol polyoxyethylene ether and maleic anhydride and determination of reactivity ratio. Polym Bull 11:94–99
36. Maciejczek A, Mass V, Rode K, Pasch H (2010) Analysis of poly (ethylene oxide)-b-poly (propylene oxide) block copolymers by MALDI-TOF mass spectrometry using collision induced dissociation. Polymer 52(26):6140–615010.1016/j.polymer.2010.10.031 ↗
37. Girod M, Carissan Y, Humbelb S, Charles L (2008) Tandem mass spectrometry of doubly charged poly (ethylene oxide) oligomers produced by electrospray ionization. Int J Mass Spectrom 272(1):1–1110.1016/j.ijms.2007.12.010 ↗
38. Cametti C, Truzzolillo D (2011) Many facets of the polyelectrolyte and oppositely charged colloidal particle complexation: counterion release and electrical conductivity behavior. J Phys Chem B 115(22):7248–725510.1021/jp109326e ↗
39. Shu X, Zhao HX, Wang XM, Zhang Q, Yang Y, Ran QP (2017) Effect of hydrophobic units of polycarboxylate superplasticizer on the flow behavior of cement paste. J Disper Sci Technol 38:256–26410.1080/01932691.2016.1160831 ↗
40. Ran QP, Song FY, Wang T, Fan SM, Ma JF, Yang Y, Liu JP (2015) Effect of the different hydrophobic groups of polycarboxylate superplasticizers on the properties in cement mortars. Polym Compos 38:1783–179110.1002/pc.23748 ↗
41. Zhang GE, Li G, Li Y (2016) Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement. Constr Build Mater 126:44–5410.1016/j.conbuildmat.2016.09.019 ↗
42. Yoshioka K, Tazawa E, Kawai K, Enohatac T (2002) Adsorption characteristics of superplasticizers on cement component minerals. Cem Concr Res 32(10):1507–151310.1016/S0008-8846(02)00782-2 ↗
43. Zingg A, Winnefeld F, Holzer L, Pakusch J, Becker S, Figi RL (2009) Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts. Cem Concr Compos 31(3):153–16210.1016/j.cemconcomp.2009.01.005 ↗
44. Plank J, Hirsch C (2007) Impact of zeta potential of early cement hydration phases on superplasticizer adsorption. Cem Concr Res 37:537–54210.1016/j.cemconres.2007.01.007 ↗
45. Cerulli T, Clemente P, Decio M, Ferrari G, Gamba M, Salvioni D, Surico F (2003) A new superplasticizer for early high-strength development in cold climates, a new superplasticizer for early high-strength development in cold climates. Special Publication 217:113–127
46. Yoshioka K, Sakai E, Daimon M, Kitahar A (1997) Role of steric hindrance in the performance of superplasticizers for concrete. J Am Ceram Soc 80:2667–267110.1111/j.1151-2916.1997.tb03169.x ↗
47. Huet C (1999) Coupled size and boundary-condition effects in viscoelastic heterogeneous and composite bodies. Mech Mater 31(12):787–82910.1016/S0167-6636(99)00038-1 ↗
48. Plank J, Winter C (2008) Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface. Cem Concr Res 38:599–60510.1016/j.cemconres.2007.12.003 ↗
49. Dalas F, Pourchet S, Nonat A, Rinaldi D, Sabio S, Mosquet M (2015) Fluidizing efficiency of comb-like superplasticizers: the effect of the anionic function, the side chain length and the grafting degree. Cem Concr Res 71:115–12310.1016/j.cemconres.2015.02.001 ↗
50. Matalkah F, Soroushian P (2018) Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement. Constr Build Mater 163:200–21310.1016/j.conbuildmat.2017.12.119 ↗
51. Mayercsik NP, Vandamme M, Kurtis KE (2016) Assessing the efficiency of entrained air voids for freeze-thaw durability through modeling. Cem Concr Res 88:43–5910.1016/j.cemconres.2016.06.004 ↗
52. Litvan GG, Sereda PJ (1987) Particulate admixtures for enhanced freeze-thaw resistance of concrete. Cem Concr Res 8(1):53–6010.1016/0008-8846(78)90057-1 ↗
53. Bikerman J (2013) Foams, vol 10. Springer, Cham
54. Lange A, Plank J (2012) Study on the foaming behaviour of allyl ether-based poly-carboxylate superplasticizers. Cem Concr Res 42:484–48910.1016/j.cemconres.2011.11.017 ↗
55. Wormuth KR, Zushma S (1991) Phase behavior of branched surfactants in oil and water. Langmuir 7:2048–205310.1021/la00058a014 ↗
56. Shan GC, Zhao S, Qiao M, Gao NX, Chen J, Ran QP (2020) Synergism effects of coconut diethanol amide and anionic surfactants for entraining stable air bubbles into concrete. Constr Build Mater 237:117–125
57. Jeknavorian A (2018) Overview of defoaming technologies for polycarboxylate-based superplasticizers. Special Publication 329:185–200
58. Llenado RA (1983) Surfactants. Anal Chem 55:93–10210.1021/ac00256a008 ↗
59. Schramm LL, Stasiuk EN, Marangoni DG (2003) Surfactants and their applications. Annu Rep Prog Chem Sect C 99:3–4810.1039/B208499F ↗
60. Feng H, Feng Z, Wang W, Deng Z, Zheng B (2021) Impact of polycarboxylate superplasticizers (PCEs) with novel molecular structures on fluidity, rheological behavior and adsorption properties of cement mortar. Constr Build Mater 292:123–285