Performance prediction analyses of styrene-butadiene rubber and crumb rubber materials in asphalt road applications
Source abstract
Abstract
One of the very popular techniques of improving asphalt pavement performance is the use of rubber materials as modifiers in the mix. Although rubber modification of asphalt binder has been found to be a promising technique towards improving the performance of asphalt mixtures, an insight impact of locally available rubber materials on asphalt mix performance is yet a research problem. Thus, it is important to investigate the effect of locally available rubber-modifiers on asphalt mixes chiefly to be able to prescribe and recommend the optimal percent of rubber materials in the preparation of durable rubber-modified asphalt mixtures. Thus, the main objective of this study was to investigate the performance of rubber-modified asphalt mixtures, and help recommend the optimal dosage of rubber materials in the asphalt mix to be able to use locally available rubber products in durable asphalt roads. Asphalt mixtures with gap-graded gradation and varying rubber dosages namely 10, 15, and 20 % were manufactured. Fatigue life estimations indicated that 15 % rubber by weight of the base binder provided excellent fatigue performance. Also, rubber-modified asphalt mixture materials produced lower accumulated strain than the conventional mix due to enhanced endurance properties of the rubber-modification. Although 10 % rubber dosage was found to be higher rut-resistant, 15 % rubber composite material was recommended mainly to have a common ground to counter fatigue and rutting distresses simultaneously. Thus, this study showed that locally available rubber materials are very promising candidates to serve as alternatives to the commercially available modified binders used in asphalt roads.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Navarro FJ, Partal P, M-Boza F, Gallegos C (2005) Influence of crumb rubber concentration on the rheological behavior of a crumb rubber modified bitumen. Energy Fuels 19:1984–199010.1021/ef049699a ↗
2. Al-Abdul-Wahhab H, Al-Amri G (1991) Laboratory evaluation of reclaimed rubber asphaltic concrete mixes. J Mater Civil Eng 3(3):189–20310.1061/(ASCE)0899-1561(1991)3:3(189) ↗
3. Albayati AH, Mohammed HK (2011) Influence of styrene butadiene rubber on the mechanical properties of asphalt concrete mixtures. Al-Qadisiya J Eng Sci 4(3):258–274
4. Khadivar A, Kavussi A (2013) Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures. Constr Build Mater 47:1099–110510.1016/j.conbuildmat.2013.05.093 ↗
5. Tamimi AA, Zubaidy IAHA, Upadhye A, Ali L (2014) Evaluation of sustainable asphalt mixture. Study Civil Eng Archit 3:41–47
6. Shih CT, Tia M, Ruth BE (1996) Evaluation of the effect of crumb rubber and SBR on rutting resistance of asphalt concrete. Am Chem Soc Fuel Chem 41(4):1227–1231
7. Vasiljevic-Shikaleska A, Popovska-Pavlovska F, Cimmino S, Duraccio D, Silvestre C (2010) Viscoelastic properties and morphological characteristics of polymer-modified bitumen blends. J Appl Polym Sci 118(3):1320–133010.1002/app.32317 ↗
8. ASTM D8 - 13b Standard terminology relating to materials for roads and pavements, Active Standard ASTM D8, developed by Subcommittee: D04.91, Book of Standards Volume: 04.03
9. ASTM D6114 / D6114 M – 09 Standard specification for asphalt-rubber binder, Active Standard ASTM D6114 / D6114 M | Developed by Subcommittee: D04.40, Book of Standards volume: 04.03
10. Gogoi R (2015) Fatigue performance characterization of styrene butadiene rubber and crumb rubber-modified asphalt mixtures, Master of Technology Thesis in Rubber Technology, Indian Institute of Technology Kharagpur, West Bengal
11. Way GB, Kaloush KE, Biligiri KP (2012) Asphalt-rubber standard practice guide, 2nd edn. Rubber Pavements Association, Tempe, p 121
12. IS: 1203 (1978) Indian standard methods for testing tar and bituminous materials: determination of penetration. Indian Roads Congress, New Delhi
13. IS: 1205 (1978) Indian standard methods for testing tar and bituminous materials: determination of softening point. Indian Roads Congress, New Delhi
14. ASTM D2196–10 (2014) Standard test methods for rheological properties of non-newtonian materials by rotational (Brookfield type) viscometer. American Society for Testing and Materials International, West Conshohocken
15. AASHTO PP 35-1998 (R 2005) Standard practice for evaluation of superpave gyratory compactors, American Association of State Highway and Transportation Officials, Washington, DC
16. ASTM D6931-12, Standard test method for indirect tensile (IDT) strength of bituminous mixtures, American Society for Testing and Materials International, USA. 2012, developed by Subcommittee: D04.26; Book of Standards volume: 04.03
17. ASTM D7369-11, Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test, American Society for Testing and Materials International, USA, 2011, Developed by Subcommittee: D04.26; Book of Standards Volume: 04.03
18. EN 12697-25: 2005, Bituminous mixtures—test methods for hot mix asphalt—Part 25: cyclic compression test, European Committee for Standardization, Brussels, Belgium
19. ASTM (1998) Viscosity–temperature chart for Asphalts, vol 04.03. American Society for Testing and Materials 1998 Annual Book of ASTM Standards, Philadelphia, pp 230–234
20. Asphalt Institute (2001) Superpave mix design, superpave series no. 2 (SP-2). Asphalt Institute, Lexington
21. IRC: 37-2012 Tentative guidelines for the design of flexible pavements. Indian Roads Congress, Ministry of Road Transport & Highways, Government of India
22. NCHRP 1-37A-2004 Guide for mechanistic-empirical design of new and rehabilitated pavement structures. NCHRP Final Report, ERES Consultants Division, Transportation Research Board of the National Academies, Washington, DC