Effects of mineral admixtures on fresh and hardened properties of self-compacting concretes: binary, ternary and quaternary systems
Source abstract
Abstract
The paper presented herein investigates the effects of using supplementary cementitious materials in binary, ternary, and quaternary blends on the fresh and hardened properties of self-compacting concretes (SCCs). A total of 22 concrete mixtures were designed having a constant water/binder ratio of 0.32 and total binder content of 550 kg/m3. The control mixture contained only portland cement (PC) as the binder while the remaining mixtures incorporated binary, ternary, and quaternary cementitious blends of PC, fly ash (FA), ground granulated blast furnace slag (GGBFS), and silica fume (SF). After mixing, the fresh properties of the concretes were tested for slump flow time, L-box height ratio, V-funnel flow time, setting time, and viscosity. Moreover, compressive strength, ultrasonic pulse velocity, and electrical resistivity of the hardened concretes were measured. Test results have revealed that incorporating the mineral admixtures improved the fresh properties and rheology of the concrete mixtures. The compressive strength and electrical resistivity of the concretes with SF and GGBFS were much higher than those of the control concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Zhu W, Bartos PJM (2003) Permeation properties of self-compacting concrete. Cem Concr Res 33:921–92610.1016/S0008-8846(02)01090-6 ↗
2. Phan TH, Chaouche M, Moranville M (2006) Influence of organic admixtures on the rheological behavior of cement pastes. Cem Concr Res 36(10):1807–181310.1016/j.cemconres.2006.05.028 ↗
3. Okamura H, Ozawa K (1995) Mix-design for self-compacting concrete. Concr Libr JSCE 25:107–120
4. Sari M, Prat E, Labastire JF (1999) High strength self-compacting concrete: original solutions associating organic and inorganic admixtures. Cem Concr Res 29:813–81810.1016/S0008-8846(99)00037-X ↗
5. Sakata S, Maruyama K, Minami M (1996) Basic properties and effects of welan gum on self compacting concrete. In: Bartos PJM, Marrs DL, Cleland DJ (eds) Proceedings of RILEM International conference production methods and workability of Concrete. E&FN Spon, London, pp 1–24
6. Lachemi M, Hossain KMA, Lambros V, Nkinamubanzi PC, Bouzoubaa N (2004) Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste. Cem Concr Res 34(2):185–19310.1016/S0008-8846(03)00233-3 ↗
7. Saric-Coric M, Khayat KH, Tagnit-Hamou A (2003) A Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier. Cem Concr Res 33(12):1999–200810.1016/S0008-8846(03)00214-X ↗
8. Şahmaran M, Christianto HA, Yaman İÖ (2006) The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars. Cem Concr Comp 28:432–44010.1016/j.cemconcomp.2005.12.003 ↗
9. Bouzoubaa N, Lachemi M (2001) Self-compacting concrete incorporating high volumes of class F fly ash preliminary results. Cem Concr Res 31:413–42010.1016/S0008-8846(00)00504-4 ↗
10. Sonebi M (2004) Medium strength self-compacting concrete containing fly ash: modelling using factorial experimental plans. Cem Concr Res 34:1199–120810.1016/j.cemconres.2003.12.022 ↗
11. Sonebi M, Bartos PJM (2002) Filling ability and plastic settlement of self-compacting concrete. Mat Struct 35(252):462–46910.1007/BF02483133 ↗
12. Khurana R, Saccone R (2001) Fly ash in self-compacting concrete. In: Malhotra M (ed) American Concrete Institute SP, vol 199. Farmington Hills Michegan, pp 259–274
13. Khayat KH, Bickley J, Lessard M (2000) Performance of self-consolidating concrete for casting basement and foundation walls. ACI Mater J 97(3): 374–380
14. Ghazel A, Khayat KH (2002) Optimizing self-consolidating concrete with limestone filler by using statistical factorial design methods. ACI Mater J 99(3):264–272
15. Nehdi M, El Chabib H, El Naggar MH (2003) Development of cost-effective self-consolidating concrete for deep foundation applications. Conc Int 25(3):49–57
16. Brooks JJ, Megat Johari MA, Mazloom M (2000) Effect of admixtures on the setting time of high-strength concrete. Cem Concr Comp 22:293–30110.1016/S0958-9465(00)00025-1 ↗
17. Park CK, Noh MH, Park TH (2005) Rheological properties of cementitious materials containing mineral admixtures. Cem Concr Res 35:842–84910.1016/j.cemconres.2004.11.002 ↗
18. EFNARC (2002) Specification and guidelines for self compacting concrete. Feb. 2002, pp 29–35. Free pdf copy downloadable from http:// www.efnarc.org
19. ASTM C 403/403M-99, (1999) Standard test methods for time of setting of concrete mixtures by penetration resistance’, Annual book of ASTM standards, 04.02 Concrete and Concrete Aggregates pp 1–6
20. Xing SY, Isamu M, Jun GY (2004) A study on the effect of fine mineral powders with distinct vitreous contents on the fluidity and rheological properties of concrete. Cem Concr Res 34:1381–138710.1016/j.cemconres.2003.12.031 ↗
21. Felekoglu B, Tosun K, Baradan B, Akin A, Uyulgan B (2006) The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars. Cem Concr Res 36:1719–172610.1016/j.cemconres.2006.04.002 ↗
22. Hınıslıoğlu S, Bayrak OÜ (2004) Optimization of early flexural strength of pavement concrete with silica fume and fly ash by the taguchi method. Civil Eng Environ Syst 21(2):79–9010.1080/10286600410001684562 ↗
23. Srinavasan CB, Narasimhan NL, Ilango SV (2003) Development of rapid-set high-strength cement using statistical experimental design. Cem Concr Res 33:1287–129210.1016/S0008-8846(03)00041-3 ↗
24. Alshamsi AM, Sabouni AR, Bushlaibi AH (1993) Influence of set-retarding superplasticizers and microsilica on the setting times of pastes at various temperature. Cem Concr Res 23:592–59810.1016/0008-8846(93)90009-X ↗
25. Naik TR, Singh SS (1997) Influence of fly ash on the setting and hardening characteristics of concrete systems. ACI Mater J 94:355–360
26. Eren O, Brooks JJ, Celik T (1995) Setting of fly ash and slag-cement concrete as effected by curing temperature. Cem Concr Aggr 17:11–1710.1520/CCA10331J ↗
27. Khedr SA, Abou-Zeid MN (1994) Characteristics of silica-fume concrete. J Mater Civil Eng 6:357–37510.1061/(ASCE)0899-1561(1994)6:3(357) ↗
28. Pistilli MF, Wintersteen R, Cechner R (1984) The uniformity and influence of silica fume from a U.S. source on the properties of Portland cement concrete. Cem Concr Aggr 6:120–12410.1520/CCA10364J ↗
29. De Almeida IR, Gonvalces AF (1990) Properties of freshly mixed high-strength concrete. In: Wierig H-J (ed) Proceedings of the RILEM colloquium on properties of fresh concrete, Honover, 1990
30. Ferraris CF, Obla KH, Hill R (2001) The influence of mineral admixtures on the rheology of cement paste and concrete. Cem Concr Res 31:245–25510.1016/S0008-8846(00)00454-3 ↗
31. Sun Z, Voigt T, Shah SP (2006) Rheometric and ultrasonic investigations of viscoelastic properties of fresh portland cement pastes. Cem Concr Res 36:278–28710.1016/j.cemconres.2005.08.007 ↗
32. Whitehurst EA (1951) Soniscope tests concrete structures. J Am Concr Inst 47:443–444