Non destructive assessment of in situ concrete strength: comparison of approaches through an international benchmark
Source abstract
Abstract
Strength assessment of concrete in existing structures is a key issue. Many non destructive techniques (NDT) are available which can provide information about the material condition and several approaches can be used to derive strength estimates from NDT test results. However, common practice suffers from many drawbacks: (a) it is difficult to ascertain the level of accuracy/confidence of concrete strength estimates, (b) one lacks established guidelines for estimating the concrete strength variability, (c) the best way to combine NDT methods and coring remains an open issue. The RILEM TC 249 “Non destructive in situ strength assessment of concrete” is addressing these problems. A benchmark was carried out in order to compare (a) how experts define and can carry out an NDT investigation program and (b) how experts derive strength values from the NDT measurements. The benchmark was based on synthetic simulations which reproduced a synthetic data set corresponding to a grid of twenty 3 m-high columns defining a single-storey building structure. The comparison of the various strategies and the analysis of results enabled identification of the most influential parameters that define an investigation approach and influence its efficiency and accuracy. A special emphasis was placed on the magnitude of the measurement error. A model of the investigation strategy is proposed, that will be detailed in future guidelines. The reader is invited to refer to a companion paper (Alwash et al. in Mater Struct, 1. doi: 10.1617/s11527-016-0962-x ), based on more extensive Monte-Carlo simulations of the same case-study, which analyzes and quantifies the efficiency of the investigation strategies with respect to both average strength and strength variability assessment, in order to draw conclusions based on rational analyses rather than on the element of chance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Non-Destructive Testing Techniques · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Alwash M, Breysse D, Sbartai ZM (2016) Using Monte-Carlo simulations to evaluate the efficiency of different strategies for non destructive assessment of concrete strength. Mater Struct. doi: 10.1617/s11527-016-0962-x10.1617/s11527-016-0962-x ↗
2. Breysse D (2012) Non-destructive assessment of concrete structures: reliability and limits of single and combined techniques. State-of-th-art report of the RILEM Technical Committee 207-INR. Springer10.1007/978-94-007-2736-6 ↗
3. IAEA International Atomic Energy Agency (2002) Guidebook on non-destructive testing of concrete structures, testing training course series no. 17
4. EN13791 (2007) Assessment of in situ compressive strength in structures and precast concrete. CEN, Brussels
5. Masi A, Chiauzzi L (2013) An experimental study on the within-member variability of in situ concrete strength in RC building structures. Constr Buil Mater 47:951–96110.1016/j.conbuildmat.2013.05.102 ↗
6. Biondi S (2008) The knowledge level in existing buildings assessment. In: 14th world conference on earthquake engineering, Beijing, China, 12–17 Oct 2008, Chinese Association of Earthquake Engineering (CAEE), International Association for Earthquake Engineering (IAEE), Digital Paper ID 05-01-0447. Mira Digital Publishing
7. Romao X, Gonçalves R, Costa A, Delgado R (2012) Evaluation of the EC8-3 confidence factors for the characterization of concrete strength in existing structures. Mater Struct 45(11):1737–175810.1617/s11527-012-9868-4 ↗
8. FEMA (1998) Handbook for the seismic evaluation of existing buildings. A Prestandard. Fema 310. Building Seismic Safety Council, Washington
9. OPCM 3274 (2003). Primi elementi in materia di criteri generali per la classificazione sismica del territorio nazionale e di normative tecniche per le costruzioni in zona sismica. Gazzetta Ufficiale 105: S.O. 72 (in Italian)
10. Nguyen NT, Sbartai ZM, Lataste JF, Breysse D, Bos F (2013) Assessing the spatial variability of concrete structures using NDT techniques—laboratory tests and case study. Constr Build Mater 49:240–25010.1016/j.conbuildmat.2013.08.011 ↗
11. Breysse D, Martinez-Fernandez J (2013) Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions. Mater Struct. online ISSN 1871-6873, no. 139
12. Breysse D (2012) Nondestructive evaluation of concrete strength: an historical review and new perspective by combining NDT methods Const. Build Mater 33(21):139–16310.1016/j.conbuildmat.2011.12.103 ↗
13. Alwash M, Breysse D, Sbartai ZM (2015) Non destructive strength evaluation of concrete: analysis of some key factors using synthetic simulations. Constr Build Mater 99:235–24510.1016/j.conbuildmat.2015.09.023 ↗
14. Facaoaru I (1993) Draft recommendation for in situ concrete strength determination by combined non-destructive methods. RILEM Draft Recommendation. Mat Str, 26, pp 43–49 (chairman)10.1007/BF02472237 ↗
15. Facaoaru I (1983) Recommendations for testing concrete by hardness methods (from RILEM TC 43 CND). Mat Str 16, 95, pp 368–376
16. Pfister V, Tundo A, Luprano VAM (2014) Evaluation of concrete strength by means of ultrasonic waves: a method for the selection of coring position. Constr Build Mater 61:278–28410.1016/j.conbuildmat.2014.03.017 ↗
17. Biondi S, Candigliota E (2008) In situ tests for seismic assessment of r.c. structures. In: 14th world conference earthquake engineering, Beijing, China, 12–17 Oct 2008, Chinese Association of Earthquake Engineering (CAEE), International Association for Earthquake Engineering (IAEE), Digital paper ID 05-01-0447. Mira Digital Publishing
18. Biondi S, Candigliota E (2008) Non destructive tests for existing r.c. structures assessment. In: Proceedings, fib 2008 symposium: Tailor made concrete structures: new solutions for our society, Amsterdam, 19–22 May 2008, pp. 1037–1039. Taylor & Francis
19. Luprano V, Caretto F, Labia N, Ciniglio G, Tatì A, Tundo A, Pfister V (2008) Nondestructive test methods for evaluation of concrete: the case study of Punta Perotti (Italy). In: International conference on durability of building materials and components, Istanbul, Turkey 11–14 May 2008
20. Masi A, Vona M (2009) La Stima della Resistenza del Calcestruzzo In-Situ: Impostazione delle Indagini ed Elaborazione dei Risultati, Progettazione Sismica, no. 1/2009. IUSS Press. ISSN 1973-7432 (in Italian)
21. CEN Comité Européen de Normalisation Ed. (2005) Eurocode 8: design of structures for earthquake resistance—Part 3: Assessment and retrofitting of buildings. EN 1998-3: 2005 E, Brussels
22. Bartlett FM, MacGregor JG (1994) Assessment of concrete strength in existing structures, Structural engineering report 198, May 1994
23. Brozovsky J (2009) Evaluation of calculation correlation efficiency as mentioned in EN13791 in order to determination concrete compression strength by non destructive testing. In: 10th International conference of the Slovenian Society For NDT, Ljubljana, pp 221–231, 1–3 Sept 2009
24. Luprano VAM, Pfister V, Tundo A, Ciniglio G, Tati A (2009) Prove non distruttive e prove distruttive su calcestruzzo, Campagna prove di Punta Perotti (BA) e correlazion delle misure. ENEA report (in Italian)
25. Pessiki SP (2003) In-place methods to estimate concrete strengths. ACI 228.1R-03 report
26. Balayssac JP, Garnier V, Villain G, Sbartai ZM, Derobert X, Piwakowski B, Breysse D, Salin J (2015) An overview of 14 years of French collaborative projects for the characterization of concrete properties by combining NDT methods. In: International symposium NDT-CE, Berlin, 15–17 Sept 2015
27. Ploix MA, Garnier V, Breysse D, Moysan J (2011) NDT data fusion to improve the evaluation of concrete structures. NDT&E Int 44(5):442–44810.1016/j.ndteint.2011.04.006 ↗