Probabilistic prediction of structural failure during 3D concrete printing processes
Source abstract
Abstract
Structural failure during 3D concrete printing (3DCP) process due to the competition of two mechanisms, the elastic buckling and plastic collapse, has been largely observed in the experiments. Prediction of this phenomena has become as consequence an important task of this innovative construction technique. Due to its strong dependence on various parameters such as the properties of fresh concrete, the geometry of the printed structure and the printing parameters, the accurate prediction of the structural response during 3DCP is challenging. Specifically, the significant evolution in time of mechanical properties as well as the heterogeneous characteristics in nature of concrete at early age make it difficult to be determined and result in high uncertainty. This fact may be a reason for the important gap between the predicted failure of 3DCP and real experiments as usually stated in the literature. To improve the prediction, the probabilistic analysis is conducted in this work, to account for the uncertainty effect of fresh concrete properties on the structure’s response. For this purpose, the Kriging metamodeling technique is chosen to estimate the probability of two failure modes of concrete structure during printing. The applicability and effectiveness of this probabilistic analysis for the 3DCP is demonstrated through a large numerical investigation that is conducted with different structure geometries and printing strategies. The present study elucidates the significant impact of uncertainties on the structural behavior during 3DCP, which has been ignored in the literature.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · BIM and Construction Integration · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Perrot A, Pierre A, Nerella VN, Wolfs RJM, Keita E, Nair SAO, Neithalath N, Roussel N, Mechtcherine V (2021) From analytical methods to numerical simulations: a process engineering toolbox for 3d concrete printing. Cem Concr Compos 122:104164. https://doi.org/10.1016/j.cemconcomp.2021.10416410.1016/j.cemconcomp.2021.104164 ↗
2. Mechtcherine V, Bos FP, Perrot A, da Silva WRL, Nerella VN, Fataei S, Wolfs RJM, Sonebi M, Roussel N (2020) Extrusion-based additive manufacturing with cement-based materials—production steps, processes, and their underlying physics: A review. Cem Concr Res 132:106037. https://doi.org/10.1016/j.cemconres.2020.10603710.1016/j.cemconres.2020.106037 ↗
3. Roussel N (2018) Rheological requirements for printable concretes. Cem Concr Res 112:76–85. https://doi.org/10.1016/j.cemconres.2018.04.00510.1016/j.cemconres.2018.04.005 ↗
4. Casagrande L, Esposito L, Menna C, Asprone D, Auricchio F (2020) Effect of testing procedures on buildability properties of 3d-printable concrete. Constr Build Mater 245:118286. https://doi.org/10.1016/j.conbuildmat.2020.11828610.1016/j.conbuildmat.2020.118286 ↗
5. Bos FP, Kruger PJ, Lucas SS, van Zijl GPAG (2021) Juxtaposing fresh material characterisation methods for buildability assessment of 3d printable cementitious mortars. Cem Concr Compos 120:104024. https://doi.org/10.1016/j.cemconcomp.2021.10402410.1016/j.cemconcomp.2021.104024 ↗
6. Bos FP, Kruger PJ, Lucas SS, van Zijl GPAG (2019) Mechanical properties and deformation behaviour of early age concrete in the context of digital construction. Compos B Eng 165:563–571. https://doi.org/10.1016/j.compositesb.2019.02.04010.1016/j.compositesb.2019.02.040 ↗
7. Le TT, Austin SA, Lim S, Buswell RA, Gibb AGF, Thorpe T (2012) Mix design and fresh properties for high-performance printing concrete. Mater Struct 45:1221–1232. https://doi.org/10.1617/s11527-012-9828-z10.1617/s11527-012-9828-z ↗
8. Wolfs RJM, Bos FP, Salet TAM (2018) Early age mechanical behaviour of 3d printed concrete: numerical modelling and experimental testing. Cem Concr Res 106:103–116. https://doi.org/10.1016/j.cemconres.2018.02.00110.1016/j.cemconres.2018.02.001 ↗
9. Wolfs RJM, Bos FP, Salet TAM (2018) Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3d printed concrete. Constr Build Mater 181:447–454. https://doi.org/10.1016/j.conbuildmat.2018.06.06010.1016/j.conbuildmat.2018.06.060 ↗
10. Kruger J, Zeranka S, van Zijl G (2019) 3d concrete printing: a lower bound analytical model for buildability performance quantification. Autom Constr 106:102904. https://doi.org/10.1016/j.autcon.2019.10290410.1016/j.autcon.2019.102904 ↗
11. Jayathilakage R, Sanjayan J, Rajeev P (2019) Direct shear test for the assessment of rheological parameters of concrete for 3d printing applications. Mater Struct 52:12. https://doi.org/10.1617/s11527-019-1322-410.1617/s11527-019-1322-4 ↗
12. Wolfs RJM, Bos FP, Salet TAM (2019) Triaxial compression testing on early age concrete for numerical analysis of 3d concrete printing. Cem Concr Compos 104:103344. https://doi.org/10.1016/j.cemconcomp.2019.10334410.1016/j.cemconcomp.2019.103344 ↗
13. Di Carlo T, Khoshnevis B, Chen Y (2013) Manufacturing additively, with fresh concrete, vol 2A. Advanced manufacturing. American Society of Mechanical Engineers, New York
14. Jayathilakage R, Rajeev P, Sanjayan JG (2020) Yield stress criteria to assess the buildability of 3d concrete printing. Constr Build Mater 240:117989. https://doi.org/10.1016/j.conbuildmat.2019.11798910.1016/j.conbuildmat.2019.117989 ↗
15. Suiker ASJ (2018) Mechanical performance of wall structures in 3d printing processes: theory, design tools and experiments. Int J Mech Sci 137:145–170. https://doi.org/10.1016/j.ijmecsci.2018.01.01010.1016/j.ijmecsci.2018.01.010 ↗
16. Suiker ASJ, Wolfs RJM, Lucas SM, Salet TAM (2020) Elastic buckling and plastic collapse during 3d concrete printing. Cem Concr Res 135:106016. https://doi.org/10.1016/j.cemconres.2020.10601610.1016/j.cemconres.2020.106016 ↗
17. Wolfs RJM, Suiker ASJ (2019) Structural failure during extrusion-based 3d printing processes. Int J Adv Manuf Technol 104:565–584. https://doi.org/10.1007/s00170-019-03844-610.1007/s00170-019-03844-6 ↗
18. Roussel N, Spangenberg J, Wallevik J, Wolfs R (2020) Numerical simulations of concrete processing: from standard formative casting to additive manufacturing. Cem Concr Res 135:106075. https://doi.org/10.1016/j.cemconres.2020.10607510.1016/j.cemconres.2020.106075 ↗
19. Kruger J, Cho S, Zeranka S, Viljoen C, van Zijl G (2020) 3d concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse. Compos B Eng 183:107660. https://doi.org/10.1016/j.compositesb.2019.10766010.1016/j.compositesb.2019.107660 ↗
20. Wolfs RJM, Salet TAM, Roussel N (2021) Filament geometry control in extrusion-based additive manufacturing of concrete: the good, the bad and the ugly. Cem Concr Res 150:106615. https://doi.org/10.1016/j.cemconres.2021.10661510.1016/j.cemconres.2021.106615 ↗
21. Carneau P, Mesnil R, Ducoulombier N, Roussel N, Baverel O (2020) Characterisation of the layer pressing strategy for concrete 3d printing. In: Bos FP, Lucas SS, Wolfs RJM, Salet TAM (eds) Second RILEM international conference on concrete and digital fabrication. Springer, Cham, pp 185–19510.1007/978-3-030-49916-7_19 ↗
22. Ducoulombier N, Mesnil R, Carneau P, Demont L, Bessaies-Bey H, Caron J-F, Roussel N (2021) The “slugs-test’’ for extrusion-based additive manufacturing: protocol, analysis and practical limits. Cem Concr Compos 121:104074. https://doi.org/10.1016/j.cemconcomp.2021.10407410.1016/j.cemconcomp.2021.104074 ↗
23. Reinold J, Nerella VN, Mechtcherine V, Meschke G (2022) Extrusion process simulation and layer shape prediction during 3d-concrete-printing using the particle finite element method. Autom Constr 136:104173. https://doi.org/10.1016/j.autcon.2022.10417310.1016/j.autcon.2022.104173 ↗
24. Echard B, Gayton N, Lemaire M (2011) AK-MCS: an active learning reliability method combining Kriging and Monte Carlo simulation. Struct Saf 33:145–154. https://doi.org/10.1016/j.strusafe.2011.01.00210.1016/j.strusafe.2011.01.002 ↗
25. Do D-P, Vu M-N, Tran N-T, Armand G (2021) Closed-form solution and reliability analysis of deep tunnel supported by a concrete liner and a covered compressible layer within the viscoelastic burger rock. Rock Mech Rock Eng 54:2311–2334. https://doi.org/10.1007/s00603-021-02401-610.1007/s00603-021-02401-6 ↗
26. Tran N-T, Do D-P, Hoxha D, Vu M-N, Armand G (2021) Kriging-based reliability analysis of the long-term stability of a deep drift constructed in the Callovo-Oxfordian claystone. J Rock Mech Geotech Eng 13:1033–1046. https://doi.org/10.1016/j.jrmge.2021.06.00910.1016/j.jrmge.2021.06.009 ↗
27. Bichon BJ, McFarland JM, Mahadevan S (2011) Efficient surrogate models for reliability analysis of systems with multiple failure modes. Reliab Eng Syst Saf 96:1386–1395. https://doi.org/10.1016/j.ress.2011.05.00810.1016/j.ress.2011.05.008 ↗
28. Laso E, Lera MSG, Alarcón E (1995) A level II reliability approach to tunnel support design. Appl Math Model 19:371–382. https://doi.org/10.1016/0307-904X(95)00019-G10.1016/0307-904X(95)00019-G ↗
29. Lü Q, Low BK (2011) Probabilistic analysis of underground rock excavations using response surface method and SORM. Comput Geotech 38:1008–1021. https://doi.org/10.1016/j.compgeo.2011.07.00310.1016/j.compgeo.2011.07.003 ↗
30. Do D-P, Tran N-T, Mai V-T, Hoxha D, Vu M-N (2020) Time-dependent reliability analysis of deep tunnel in the viscoelastic burger rock with sequential installation of liners. Rock Mech Rock Eng 53:1259–1285. https://doi.org/10.1007/s00603-019-01975-610.1007/s00603-019-01975-6 ↗
31. Wang GG, Shan S (2006) Review of metamodeling techniques in support of engineering design optimization. J Mech Des 129:370–380. https://doi.org/10.1115/1.242969710.1115/1.2429697 ↗
32. Lophaven S, Nielsen H, Søndergaard J (2002) DACE—a Matlab Kriging Toolbox, Version 2.0
33. Marelli S, Sudret B (2014) UQLab: a framework for uncertainty quantification in Matlab. American Society of Civil Engineers10.1061/9780784413609.257 ↗
34. Diab Z, Do D-P, Rémond S, Hoxha D (2022) Uncertainty quantification of concrete properties at fresh state and stability analysis of the 3d printing process by stochastic approach. In: Buswell R, Blanco A, Cavalaro S, Kinnell P (eds) Third RILEM international conference on concrete and digital fabrication, vol 37. Springer, Cham, pp 155–16010.1007/978-3-031-06116-5_23 ↗
35. Sobol IM (1993) Sensitivity estimates for nonlinear mathematical models. Math Model Comput Exp 1(4):407–414
36. Do DP, Guo X, Dias D (2022) Probabilistic stability analysis of deep rock tunnel excavated by mechanized tunneling considering anisotropic initial stresses. Appl Sci 12(15):747910.3390/app12157479 ↗
37. Saltelli A, Annoni P, Azzini I, Campolongo F, Ratto M, Tarantola S (2010) Variance based sensitivity analysis of model output design and estimator for the total sensitivity index. Comput Phys Commun 181(2):259–27010.1016/j.cpc.2009.09.018 ↗
38. Iooss B, Lemaître P (2015) A review on global sensitivity analysis methods. In: Uncertainty management in simulation-optimization of complex systems, pp 101–12210.1007/978-1-4899-7547-8_5 ↗