journal article·2023-03

Rheological properties and polymer phase structure characterization of SBS/CR composite modified asphalt (CMA) binders

Chenguang Shi, You Wu, Tianling Wang, Yunhong Yu, Houzhi Wang, Jun Yang

Materials and Structures· Volume 56· Issue 2
Publisher page

Abstract

Crumb rubber (CR) content plays an important role in the rheological properties and polymer phase structure of styrene–butadiene–styrene (SBS) and crumb rubber (CR) composite modified asphalt (SBS/CR CMA) binders. To thoroughly understand the modified mechanisms and microstructures of polymers, the frequency sweep tests were employed to measure the mechanical parameters including dynamic shear modulus, phase angle, and dynamic viscosity within the linear viscoelastic domain, Sessile Drop test was conducted to obtain the contact angles which were used to calculate the surface free energy, and Confocal Laser Scanning Microscopy (CLSM) test was applied to capture the images of polymer phase. According to the time–temperature superposition principle (TTSP), the master curves of dynamic shear modulus, phase angle, and dynamic viscosity were constructed, respectively. Therefore, the mechanical properties, zero shear viscosity (ZSV), and flow activation energy were determined to be analyzed for evaluation of CR content. The addition of the CR modifier improves the ZSV of binders, and SBS/CR-35 owns the largest value of ZSV showing the best flow resistance. What’s more, SBS/CR-35 presents a lower temperature dependence under higher loading frequencies because of the smallest flow activation energy and results in the highest surface free energy (SFE). Among the five binders, SBS/CR-35 exhibits the best mechanical performance. Based on the reconstruction of the polymer phase, the statistical analysis revealed that the majority of SBS particles (50.15%) are formed of 0.3 μm3 in volume size and the majority of CR particles are 2.5 μm3 in all SBS/CR CMA binders. All polymer particles are mainly distributed within the volume range of 0.3 μm3 to 40 μm3.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Xiao FP, Zong QD, Wang JG, Chen J, Liu J (2020) Storage stability characterization and improvement of SBS and crumb rubber composite modified asphalt. Road Mater Pavement Des. https://doi.org/10.1080/14680629.2020.183015110.1080/14680629.2020.1830151 ↗
2. Qian CD, Fan WY, Yang GM, Han L, Xing BD, Lv XB (2020) Influence of crumb rubber particle size and SBS structure on properties of CR/SBS composite modified asphalt. Constr Build Mater 235:5. https://doi.org/10.1016/j.conbuildmat.2019.11751710.1016/j.conbuildmat.2019.117517 ↗
3. Milad AA, Ali A, Yusoff N (2020) A review of the utilisation of recycled waste material as an alternative modifier in asphalt mixtures. Civil Eng J 6:42–6010.28991/cej-2020-SP(EMCE)-05 ↗
4. Li D, Leng Z, Zou F, Yu H (2021) Effects of rubber absorption on the aging resistance of hot and warm asphalt rubber binders prepared with waste tire rubber. J Clean Prod 303:84. https://doi.org/10.1016/j.jclepro.2021.12708210.1016/j.jclepro.2021.127082 ↗
5. Soto FM, Mino GD (2018) Improvements in the mix-design, performance features and rational methodology of rubber modified binders for the thermal evaluation of the railway sub-ballast. Int J Res Sci Manag 5(2):1–19
6. Soto FM, Mino GD (2018) Volumetric Mix-design optimization of bituminous rubber-mixtures in railway sub-ballast. Int J Eng Sci Res Technol 7(1):483–507. https://doi.org/10.5281/zenodo.115865310.5281/zenodo.1158653 ↗
7. Liu S, Chen XH, Ma YW, Yang J, Cai DG, Yang GT (2019) Modelling and in-situ measurement of dynamic behavior of asphalt supporting layer in slab track system. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2019.11677610.1016/j.conbuildmat.2019.116776 ↗
8. Liu S, Chen XH, Yang J, Cai DG, Yang GT (2020) Numerical study and in-situ measurement of temperature features of asphalt supporting layer in slab track system. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2019.11734310.1016/j.conbuildmat.2019.117343 ↗
9. Liu S, Yang J, Chen XH, Yang GT, Cai DG (2018) Application of mastic asphalt waterproofing layer in high-speed railway track in cold regions. Appl Sci-Basel. https://doi.org/10.3390/app805066710.3390/app8050667 ↗
10. Wang H, Liu X, Zhang H, Apostolidis P, Erkens S, Skarpas A (2020) Micromechanical modelling of complex shear modulus of crumb rubber modified bitumen. Mater Des. https://doi.org/10.1016/j.matdes.2019.10846710.1016/j.matdes.2019.108467 ↗
11. Ren S, Liu X, Lin P, Wang H, Fan W, Erkens S (2021) The continuous swelling-degradation behaviors and chemo-rheological properties of waste crumb rubber modified bitumen considering the effect of rubber size. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2021.12496610.1016/j.conbuildmat.2021.124966 ↗
12. Wang H, Apostolidis P, Zhu J, Liu X, Skarpas A, Erkens S (2021) The role of thermodynamics and kinetics in rubber-bitumen systems: a theoretical overview. Int J Pavement Eng 22(14):1785–1800. https://doi.org/10.1080/10298436.2020.172428910.1080/10298436.2020.1724289 ↗
13. Wang H, Liu X, Apostolidis P, Erkens S, Scarpas T (2019) Numerical investigation of rubber swelling in bitumen. Constr Build Mater 214:506–515. https://doi.org/10.1016/j.conbuildmat.2019.04.14410.1016/j.conbuildmat.2019.04.144 ↗
14. Wang H, Zhang H, Liu X, Skarpas A, Erkens S, Leng Z (2021) Micromechanics-based complex modulus prediction of crumb rubber modified bitumen considering interparticle interactions. Road Mater Pavement Des 22:S251–S268. https://doi.org/10.1080/14680629.2021.189996510.1080/14680629.2021.1899965 ↗
15. Wang H, Liu X, Apostolidis P, Erkens S, Skarpas A (2020) Experimental investigation of rubber swelling in bitumen. Transp Res Rec 2674(2):203–212. https://doi.org/10.1177/036119812090642310.1177/0361198120906423 ↗
16. Chen SY, Ge DD, Jin DZ, Zhou XD, Liu CC, Lv ST, You ZP (2020) Investigation of hot mixture asphalt with high ground tire rubber content. J Clean Prod. https://doi.org/10.1016/j.jclepro.2020.12403710.1016/j.jclepro.2020.124037 ↗
17. Liu H, Luo R (2017) Development of master curve models complying with linear viscoelastic theory for complex moduli of asphalt mixtures with improved accuracy. Constr Build Mater 152:259–268. https://doi.org/10.1016/j.conbuildmat.2017.06.14310.1016/j.conbuildmat.2017.06.143 ↗
18. Sun Y, Huang B, Chen J, Jia X, Ding Y (2016) Characterizing rheological behavior of asphalt binder over a complete range of pavement service loading frequency and temperature. Constr Build Mater 123:661–672. https://doi.org/10.1016/j.conbuildmat.2016.07.04710.1016/j.conbuildmat.2016.07.047 ↗
19. Possebon ÉP, Specht LP, Di Benedetto H, Schuster SL, Pereira DdS (2021) Rheological properties, 2S2P1D modelling and SHStS transformation of 12 Brazilian bitumens and mixtures. Road Mater Pavement Des 2:1–18. https://doi.org/10.1080/14680629.2021.201058910.1080/14680629.2021.2010589 ↗
20. Zeiada W, Liu H, Al-Khateeb GG, Shanableh A, Samarai M (2022) Evaluation of test methods for measurement of zero shear viscosity (ZSV) of asphalt binders. Constr Build Mater 325:87. https://doi.org/10.1016/j.conbuildmat.2022.12679410.1016/j.conbuildmat.2022.126794 ↗
21. Singh D, Mishra V, Girimath SB, Das AK, Rajan B (2019) Evaluation of rheological and moisture damage properties of crumb rubber-modified asphalt binder. Adv Civil Eng Mater 8(1):477–496. https://doi.org/10.1520/acem2019004510.1520/acem20190045 ↗
22. Zhu J, Birgisson B, Kringos N (2014) Polymer modification of bitumen: advances and challenges. Eur Polymer J 54(1):18–3810.1016/j.eurpolymj.2014.02.005 ↗
23. Blom J, Soenen H, Van den Brande N, Van den Bergh W (2021) New evidence on the origin of “bee structures” on bitumen and oils, by atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). Fuel. https://doi.org/10.1016/j.fuel.2021.12126510.1016/j.fuel.2021.121265 ↗
24. Mirwald J, Hofko B, Pipintakos G, Blom J, Soenen H (2022) Comparison of microscopic techniques to study the diversity of the bitumen microstructure. Micron. https://doi.org/10.1016/j.micron.2022.10329410.1016/j.micron.2022.103294 ↗
25. Pipintakos G, Hasheminejad N, Lommaert C, Bocharova A, Blom J (2021) Application of Atomic Force (AFM), Environmental Scanning Electron (ESEM) and Confocal Laser Scanning Microscopy (CLSM) in bitumen: a review of the ageing effect. Micron. https://doi.org/10.1016/j.micron.2021.10308310.1016/j.micron.2021.103083 ↗
26. Jiang Y, Liu Y, Gong J, Li C, Xi Z, Cai J, Xie H (2018) Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures. Mater Struct. https://doi.org/10.1617/s11527-018-1217-910.1617/s11527-018-1217-9 ↗
27. Elseifi MA, Salari S, Mohammad LN, Hassan M, Daly WH, Dessouky S (2012) New approach to recycling asphalt shingles in hot-mix asphalt. J Mater Civ Eng 24(11):1403–1411. https://doi.org/10.1061/(asce)mt.1943-5533.000052010.1061/(asce)mt.1943-5533.0000520 ↗
28. Handle F, Fuessl J, Neudl S, Grossegger D, Eberhardsteiner L, Hofko B, Hospodka M, Blab R, Grothe H (2016) The bitumen microstructure: a fluorescent approach. Mater Struct 49(1–2):167–180. https://doi.org/10.1617/s11527-014-0484-310.1617/s11527-014-0484-3 ↗
29. Liu Y, Zhang J, Chen R, Cai J, Xi Z, Xie H (2017) Ethylene vinyl acetate copolymer modified epoxy asphalt binders: phase separation evolution and mechanical properties. Constr Build Mater 137:55–65. https://doi.org/10.1016/j.conbuildmat.2017.01.08110.1016/j.conbuildmat.2017.01.081 ↗
30. Li R, Leng Z, Partl MN, Raab C (2021) Characterization and modelling of creep and recovery behaviour of waterborne epoxy resin modified bitumen emulsion. Mater Struct. https://doi.org/10.1617/s11527-020-01594-610.1617/s11527-020-01594-6 ↗
31. Xu W, Zhuang G, Chen Z, Wei J (2020) Experimental study on the micromorphology and strength formation mechanism of epoxy asphalt during the curing reaction. Appl Sci-Basel. https://doi.org/10.3390/app1007261010.3390/app10072610 ↗
32. Kaya D, Topal A, McNally T (2019) Correlation of processing parameters and ageing with the phase morphology of styrene-butadiene-styrene block co-polymer modified bitumen. Mater Res Expr. https://doi.org/10.1088/2053-1591/ab349c10.1088/2053-1591/ab349c ↗
33. Hao G, Wang Y (2021) 3D reconstruction of polymer phase in polymer-modified asphalt using confocal fluorescence microscopy. J Mater Civil Eng. https://doi.org/10.1061/(asce)mt.1943-5533.000348510.1061/(asce)mt.1943-5533.0003485 ↗
34. Shi C, Zhou W, Wang T, Cai X, Wang H, Yang J, Hong J, Gong M (2022) Fatigue performance characterization of styrene-butadiene-styrene and crumb rubber composite modified asphalt binders with high crumb rubber contents. J Clean Prod. https://doi.org/10.1016/j.jclepro.2021.12997910.1016/j.jclepro.2021.129979 ↗
35. Chen H, Zhang Y, Bahia HU (2021) Estimating asphalt binder fatigue at multiple temperatures using a simplified pseudo-strain energy analysis approach in the LAS test. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.12091110.1016/j.conbuildmat.2020.120911 ↗
36. Chen H, Bahia H (2021) Modelling effects of aging on asphalt binder fatigue using complex modulus and the LAS test. Int J Fatigue. https://doi.org/10.1016/j.ijfatigue.2021.10615010.1016/j.ijfatigue.2021.106150 ↗
37. Zeng Z, Underwood BS, Castorena C (2020) Low-temperature performance grade characterisation of asphalt binder using the dynamic shear rheometer. Int J Pavement Eng. https://doi.org/10.1080/10298436.2020.177476610.1080/10298436.2020.1774766 ↗
38. Anderson DA, Christensen DW, Bahia HU, Dongre R, Sharma MG, Antle C, Button JJAC (1994) Binder characterization and evaluation. Volume 3: physical characterization. 3
39. Zeng Z, Zhang D, Liu H (2021) Development of an energy-based framework to determine the surface free energy of asphalt binder: theoretical models. Mater Struct. https://doi.org/10.1617/s11527-021-01834-310.1617/s11527-021-01834-3 ↗
40. Zhang D, Liu H (2018) Proposed approach for determining consistent energy parameters based on the surface free energy theory. J Mater Civil Eng 30:11. https://doi.org/10.1061/(asce)mt.1943-5533.000246710.1061/(asce)mt.1943-5533.0002467 ↗
41. Zhu H, Sun L, Yang J, Chen Z, Gu W (2011) Developing master curves and predicting dynamic modulus of polymer-modified asphalt mixtures. J Mater Civ Eng 23(2):131–137. https://doi.org/10.1061/(asce)mt.1943-5533.000014510.1061/(asce)mt.1943-5533.0000145 ↗
42. Rouleau L, Deü JF, Legay A, Le Lay F (2013) Application of Kramers-Kronig relations to time–temperature superposition for viscoelastic materials. Mech Mater 65:66–75. https://doi.org/10.1016/j.mechmat.2013.06.00110.1016/j.mechmat.2013.06.001 ↗
43. Parot JM, Duperray B (2007) Applications of exact causality relationships to materials dynamic analysis. Mech Mater 39(5):419–433. https://doi.org/10.1016/j.mechmat.2006.07.00410.1016/j.mechmat.2006.07.004 ↗
44. Carreau PJ (1972) Rheological equations from molecular network theories. Trans Soc Rheol 16(1):99–000. https://doi.org/10.1122/1.54927610.1122/1.549276 ↗
45. Narayan SPA, Little DN, Rajagopal KR (2019) Incorporating disparity in temperature sensitivity of asphalt binders into high-temperature specifications. J Mater Civil Eng 31:1. https://doi.org/10.1061/(asce)mt.1943-5533.000253410.1061/(asce)mt.1943-5533.0002534 ↗
46. Herrington PR (1998) Oxidation of bitumen in the presence of a constant concentration of oxygen. Pet Sci Technol 16(9–10):1061–1084. https://doi.org/10.1080/1091646980894982410.1080/10916469808949824 ↗
47. Shan LU, Tan YQ, Underwood S, Kim YR (2010) Application of thixotropy to analyze fatigue and healing characteristics of asphalt binder. Transp Res Rec 2179:85–92. https://doi.org/10.3141/2179-1010.3141/2179-10 ↗
48. Jin X, Han R, Cui Y, Glover CJ (2011) Fast-rate–constant-rate oxidation kinetics model for asphalt binders. Ind Eng Chem Res 50(23):13373–13379. https://doi.org/10.1021/ie201275q10.1021/ie201275q ↗
49. Luo X, Gu F, Zhang Y, Lytton RL, Birgisson B (2018) Kinetics-based aging evaluation of in-service recycled asphalt pavement. J Clean Prod 200:934–944. https://doi.org/10.1016/j.jclepro.2018.07.26710.1016/j.jclepro.2018.07.267 ↗
50. Ma F, Luo X, Li H, Huang Z (2021) Healing kinetics of asphalt binder based on a new testing approach. Constr Build Mater 305:8. https://doi.org/10.1016/j.conbuildmat.2021.12464610.1016/j.conbuildmat.2021.124646 ↗
51. Notani MA, Arabzadeh A, Satvati S, Tabesh MT, Hashjin NG, Estakhri S, Alizadeh M (2020) Investigating the high-temperature performance and activation energy of carbon black-modified asphalt binder. Sn Appl Sci 2:2. https://doi.org/10.1007/s42452-020-2102-z10.1007/s42452-020-2102-z ↗
52. Mahmoudi Y, Mangiafico S, Sauzéat C, Di Benedetto H, Pouget S, Faure J-P (2020) Tridimensional linear viscoelastic properties of bituminous mixtures produced with crumb rubber added by dry process. Road Mater Pavement Des 22(9):2086–2096. https://doi.org/10.1080/14680629.2020.173756610.1080/14680629.2020.1737566 ↗
53. Shen J, Amirkhanian S (2005) The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders. Int J Pavement Eng 6(4):265–271. https://doi.org/10.1080/1029843050037333610.1080/10298430500373336 ↗
54. Airey GD, Rahman MM, Collop AC (2003) Absorption of bitumen into crumb rubber using the basket drainage method. Int J Pavement Eng 4(2):105–119. https://doi.org/10.1080/102984303200015887910.1080/1029843032000158879 ↗
55. Hussein IA, Iqbal MH, Al-Abdul-Wahhab HI (2005) Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt. Rheol Acta 45(1):92–104. https://doi.org/10.1007/s00397-005-0455-210.1007/s00397-005-0455-2 ↗
56. Garcia-Morales M, Partal FJ Navarro P, Martinez-Boza F, Gallegos C, González N, González O, Muñoz ME (2004) Viscous properties and microstructure of recycled eva modified bitumen. Fuel 83(1):31–38. https://doi.org/10.1016/S0016-2361(03)00217-510.1016/S0016-2361(03)00217-5 ↗
57. Anderson DA, Le Hir YM, Planche J-P, Martin D, Shenoy A (2002) Zero shear viscosity of asphalt binders. 1810 (1):54-62. doi:https://doi.org/10.3141/1810-0710.3141/1810-07 ↗
58. Salomon HD (2002) Ranking asphalt binders by activation energy for flow. J Appl Asphalt Binder Technol 2:2
59. Marasteanu MO, Clyne T, McGraw J, Li X, Velasquez R (2005) High-temperature rheological properties of asphalt binders. Transp Res Rec 1901 1:52–59. https://doi.org/10.1177/036119810519010010710.1177/0361198105190100107 ↗
60. Haider SW, Mirza MW, Thottempudi AK, Bari J, Baladi GY (2011) characterizing temperature susceptibility of asphalt binders using activation energy for flow. In: T&DI Congress 2011 : Integrated Transportation and Development for a Better Tomorrow. pp 493–503. doi:doi:https://doi.org/10.1061/41167(398)4810.1061/41167(398)48 ↗