Influence of polymer proportion on transfer properties of repair mortars having equivalent water porosity
Source abstract
Abstract
This study analyzes the influence of polymers proportion on the durability indicators of mortars patch repair modified with poly-ethyl acrylate styrene acrylamide (PEASA) and having similar water porosity (in the range 16, 5–18 %). To assess mortars durability, this work was based on the comparison of durability indicators (porosity, permeability, capillary absorption, effective chloride diffusion coefficient) of four repair industrial materials and one reference mortar. Results indicate that water porosity on its own is not sufficient to understand the transfer properties behavior of these materials. There is evidence that material performance depends on polymers proportion which have an important role in microstructure and pore size distribution. The use of PEASA aqueous dispersions, enabled polymer film formation to yield a monolithic matrix phase with a network structure in which the hydrated cement phase and polymer phase interpenetrate into each other. This eventually helps to improve flexural strength and durability properties of mortar repair.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Amiri O, Aït-Mokhtar A, Seigneurin A (1997) A complement to the discussion of A. Xu and S. Chandra about the paper “calculation of chloride diffusion coefficient in concrete from ionic migration measurements” by C. Andrade. Cem Concr Res 27:951–95710.1016/S0008-8846(97)00082-3 ↗
2. Poupard O, Aït-Mokhtar A, Dumargue P (2003) Impedance spectroscopy in reinforced concrete: procedure for monitoring steel corrosion—Part II: Polarization effect. J Mater Sci 38:3521–352610.1023/A:1025600624991 ↗
3. Younsi A, Turcry P, Rozière E, Aït-Mokhtar A, Loukili A (2011) Performance-based design and carbonation of concrete with high fly ash content. Cement Concr Compos 33:993–100010.1016/j.cemconcomp.2011.07.005 ↗
4. Costa A, Appleton J (2002) Case studies of concrete deterioration in a marine environment in Portugal. Cement Concr Compos 24:169–17910.1016/S0958-9465(01)00037-3 ↗
5. EN 1504 (2005) Products and systems for the protection and repair of concrete structures. The European Standards
6. Canisius T, Waleed N (2004) Concrete patch repairs under propped and unpropped implementation. Proc Inst Civ Eng 157:149–156
7. RILEM (1994) Draft recommendation for repair strategies for concrete structures damaged by reinforcement corrosion. Mater Struct 27:415–43610.1007/BF02473446 ↗
8. Morgan DR (1996) Compatibility of concrete repair materials systems. Constr Build Mater 10:51–6110.1016/0950-0618(95)00060-7 ↗
9. Fowler DW (1999) Polymers in concrete: a vision for the 21st century. Cement Concr Compos 21:449–45210.1016/S0958-9465(99)00032-3 ↗
10. Ohama Y (1998) Polymer-based admixtures. Cement Concr Compos 20:189–21210.1016/S0958-9465(97)00065-6 ↗
11. Sakai E, Sugita J (1995) Composite mechanism of polymer modified cement. Cem Concr Res 25:127–13510.1016/0008-8846(94)00120-N ↗
12. Su Z, Sujata K, Bijen JMJM, Jennings HM, Fraaij ALA (1996) The evolution of the microstructure in styrene acrylate polymer-modified cement pastes at the early stage of cement hydration. Cem Based Mater 3:87–9310.1016/S1065-7355(96)90041-3 ↗
13. Janotka I, Madejovh J, Stevula L, Frt’alova DM (1996) Behavior of Ca(OH)2 in the presence of the set styrene-acrylate dispersion. Cem Concr Res 26:1727–173510.1016/S0008-8846(96)00156-1 ↗
14. Silva DA, Roman HR, Gleize PJP (2002) Evidences of chemical interaction between EVA and hydrating portland cement. Cem Concr Res 32:1383–139010.1016/S0008-8846(02)00805-0 ↗
15. Ohama Y, Demura K (1991) Pore size distribution and oxygen diffusion resistance of polymer-modified mortars. Cem Concr Res 21:309–31510.1016/0008-8846(91)90012-7 ↗
16. Shaker FA, El-Dieb AS, Reda MM (1997) Durability of styrene butadiene latex modified concrete. Cem Concr Res 27:711–72010.1016/S0008-8846(97)00055-0 ↗
17. Ramli M, Tabassi AA (2012) Effects of polymer modification on the permeability of cement mortars under different curing conditions: a correlational study that includes pore distributions, water absorption and compressive strength. Constr Build Mater 28:561–57010.1016/j.conbuildmat.2011.09.004 ↗
18. Yang Z, Shi X, Creighton AT, Peterson MM (2009) Effect of styrene-butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. Constr Build Mater 23:2283–229010.1016/j.conbuildmat.2008.11.011 ↗
19. Zhong S, Chen Z (2002) Properties of latex blends and its modified cement mortars. Cem Concr Res 32:1515–152410.1016/S0008-8846(02)00813-X ↗
20. Aggarwal LK, Thapliyal PC, Karade SR (2007) Properties of polymer-modified mortars using epoxy and acrylic emulsions. Constr Build Mater 21:379–38310.1016/j.conbuildmat.2005.08.007 ↗
21. Afridi MUK, Ohamab Y, Demurab K, Iqbal MZ (2003) Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars. Cem Concr Res 33:1715–172110.1016/S0008-8846(02)01094-3 ↗
22. Hamami A, Turcry P, Aït-Mokhtar A (2012) Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars. Cem Concr Res 42:490–49810.1016/j.cemconres.2011.11.019 ↗
23. EN 12190 (1998) Products and systems for the protection and repair of concrete structures. Test methods: determination of compressive strength for repair mortars. The European Standards
24. Arliguie G, Hornain H, GranDuBé (2007) Grandeurs associées à la durabilité des bétons. ed. Presse de l’école nationale des Ponts et Chaussées
25. Klinkenberg LJ (1941) The permeability of porous media to liquids and gases. American Petrolium Institute, Drilling and Production Practice, New York, pp 200–213
26. Gallé C (2001) Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry. A comparative study between oven-, vacuum-, and freeze-drying. Cem Concr Res 31:1467–147710.1016/S0008-8846(01)00594-4 ↗
27. Ohama Y (1987) Principle of latex modification and some typical properties of latex modified mortars and concretes. ACI Mater J 86:511–518
28. Garboczi EJ (1991) Mercury porosimetry and effective networks for permeability calculations in porous materials. Powder Technol 67:121–12510.1016/0032-5910(91)80148-C ↗
29. Aït-Mokhtar A, Amiri O, Sammartino S (1999) Analytic modelling and experimental study of the porosity and permeability of porous medium—application to cement mortars and granitic rock. Mag Concr Res 51:391–39610.1680/macr.1999.51.6.391 ↗
30. Amiri O, Aït-Mokhtar A, Sarhani M (2005) Tri-dimensional modelling of cementitious materials permeability from polymodal pore size distribution obtained by mercury intrusion porosimetry tests. Adv Cem Res 17:39–4510.1680/adcr.2005.17.1.39 ↗