Static and dynamic properties of retrofitted timber beams using glass fiber reinforced polymers
Source abstract
Abstract
A study on the static and dynamic properties of sawn timber beams reinforced with glass fiber-reinforced polymer (GFRP) is reported in this paper. The experimental program is focused on the behavior of unidirectional wooden slabs, and the main objective is to fulfill the service state limit upon vibrations using GFRP when an architectonical retrofitting project is necessary. Two different typologies of reinforcement were evaluated on pine wood beams: one applied the composite only on the lower side of the beams, while the other also covered half of the beams depth. For the dynamic characterization, the natural frequency, damping ratio, and dynamic elastic modulus were measured using two different techniques: experimental modal analysis upon the whole beams; and bandwidth method using smaller samples of the same material. The static characterization consisted of four point bending tests, where elastic modulus, bending strength and ductility were assessed. The lower composite had better ductility and bending strength. On the other hand, the U-shaped laminate showed higher stiffness but also at a higher material cost. However, it allowed some ductility, i.e. compressive plasticity, even in the presence of hidden knots. Both dynamic techniques gave similar results and were capable of measuring the structure stiffness, even if short samples were used. Finally, the changes on dynamic properties because of the GFRP did not jeopardize the dynamic performance of the reinforced timber beams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Hygrothermal properties of building materials · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Arriaga F, Peraza F, Esteban M, Bobadilla I, García F (2002) Intervención en estructuras de madera. Editorial AITIM, Madrid (In Spanish)
2. Bachmann H (1997) Vibration problems in structures: practical guidelines. Birkhäuser verlag, Basel. doi: 10.1007/978-3-0348-9231-5
3. Borri A, Corradi M, Grazini A (2005) A method for flexural reinforcement of old wood beams with CFRP materials. Composites Part B-Eng 36(2):143–153. doi: 10.1016/j.compositesb.2004.04.01310.1016/j.compositesb.2004.04.013 ↗
4. Brotóns V, Tomás R, Ivorra S, Alarcón JC (2013) Temperature influence on the physical and mechanical properties of a porous rock: San Julian’s calcarenite. Eng Geol 167:117–127. doi: 10.1016/j.enggeo.2013.10.01210.1016/j.enggeo.2013.10.012 ↗
5. Brotóns V, Tomás R, Ivorra S, Grediaga A (2014) Relationship between static and dynamic elastic modulus of calcarenite heated at different temperatures: the San Julián’s stone. Bull Eng Geol Environ 73:791–799. doi: 10.1007/s10064-014-0583-y10.1007/s10064-014-0583-y ↗
6. Bru D, Baeza FJ, Ivorra S, Varona FB (2014) Numerical and experimental evaluation of FRP reinforcement on the mechanical behavior of timber beams. In 16th European conference on composite materials ECCM16, Seville, 22–26 June 2014
7. Buell TW, Saadatmanesh H (2005) Strengthening timber bridge beams using carbon fiber. J Struct Eng 131(1):173–187. doi: 10.1061/(ASCE)0733-9445(2005)131:1(17310.1061/(ASCE)0733-9445(2005)131:1(173) ↗
8. Bui QB, Morel JC, Hans S, Meunier N (2009) Compression behaviour of non-industrial materials in civil engineering by three scale experiments: the case of rammed earth. Mater Struct 42(8):1101–1116. doi: 10.1617/s11527-008-9446-y10.1617/s11527-008-9446-y ↗
9. Bulleit WM, Sandberg LB, Woods GJ (1989) Steel-reinforced glued laminated timber. J Struct Eng 115(2):434–44410.1061/(ASCE)0733-9445(1989)115:2(433) ↗
10. Chopra AK (2001) Dynamic of structures: theory and applications to earthquake engineering, 2nd edn. Prentice Hall Inc., Englewood Cliffs, NJ
11. Divos F, Tanaka T (2005) Relation between static and dynamic modulus of elasticity of wood. Acta Silv Lign Hung 1:105–11010.37045/aslh-2005-0009 ↗
12. Giner VT, Ivorra S, Baeza FJ, Zornoza E, Ferrer B (2011) Silica fume admixture effect on the dynamic properties of concrete. Constr Build Mater 25(8):3272–3277. doi: 10.1016/j.conbuildmat.2011.03.01410.1016/j.conbuildmat.2011.03.014 ↗
13. Giner VT, Baeza FJ, Ivorra S, Zornoza E, Galao O (2012) Effect of steel and carbon fiber additions on the dynamic properties of concrete containing silica fume. Mater Des 34:332–339. doi: 10.1016/j.matdes.2011.07.06810.1016/j.matdes.2011.07.068 ↗
14. Goldman S (1999) Vibration spectrum analysis: a practical approach. Industrial Press Inc., New York
15. Ilic J (2001) Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R Baker. Eur J Wood Wood Prod 59(3):169–175. doi: 10.1007/s00107010019810.1007/s001070100198 ↗
16. Ilic J (2003) Dynamic MOE of 55 species using small wood beams. Eur J Wood Wood Prod 61(3):167–172. doi: 10.1007/s00107-003-0367-810.1007/s00107-003-0367-8 ↗
17. Johns KC, Lacroix S (2000) Composite reinforcement of timber in bending. Can J Civ Eng 27(5):899–90610.1139/l00-017 ↗
18. Katzensteiner BO (1994) Use of steel fiber-reinforced concrete in seismic design. Dissertation, University of British Columbia
19. Kranitz K, Deublein M, Niemz P (2014) Determination of dynamic elastic moduli and shear moduli of aged wood by means of ultrasonic devices. Mater Struc 47(6):925–936. doi: 10.1617/s11527-013-0103-810.1617/s11527-013-0103-8 ↗
20. Lazan BJ (1968) Damping of materials and members in structural mechanics. Pergamon, Oxford
21. Lopez-Anido R, Xu H (2002) Structural characterization of hybrid fiber-reinforced polymer-glulam panels for bridge decks. J Composites Constr 6(3):194–203. doi: 10.1061/(ASCE)1090-0268(2002)6:3(194)10.1061/(ASCE)1090-0268(2002)6:3(194) ↗
22. Naghipour M, Taheri F, Zou GP (2005) Evaluation of vibration damping of glass-reinforced-polymer-reinforced glulam composite beams. J Struct Eng 131(7):1044–1050. doi: 10.1061/(ASCE)0733-9445(2005)131:7(1044)10.1061/(ASCE)0733-9445(2005)131:7(1044) ↗
23. Paz M, Leigh W (2004) Structural dynamics: theory and computation. Kluwer Academic Publishers, Norwell, MA10.1007/978-1-4615-0481-8 ↗
24. Pellerin RF et al (2002) Nondestructive evaluation of wood. Forest Products Society, Madison
25. Perstorper M (1994) Strength and stiffness prediction of timber using conventional and dynamic methods. In: 1st European symposium on non-destructive evaluation of wood, University of Sopron, Sopron
26. Radford DW, Van Goethem D, Gutkowski RM, Peterson ML (2002) Composite repair of timber structures. Constr Build Mater 16(7):417–425. doi: 10.1016/S0950-0618(02)00044-210.1016/S0950-0618(02)00044-2 ↗
27. Ross CA, Tedesco JW, Kuennen ST (1995) Effects of strain rate on concrete strength. ACI Mater J 92(1):37–47
28. Sandoz JL (1989) Grading of construction timber by ultrasound. Wood Sci Technol 23(1):95–10810.1007/BF00350611 ↗
29. Triantafillou TC (1998) Composites: a new possibility for the shear strengthening of concrete, masonry and wood. Composites Sci Technol 58(8):1285–1295. doi: 10.1016/S0266-3538(98)00017-710.1016/S0266-3538(98)00017-7 ↗
30. Vignote S, Martínez I (2005) Tecnología de la Madera. Ediciones Mundi-Prensa, Madrid (In Spanish)
31. Yail JK, Kent AH (2010) Modeling of timber beams strengthened with various CFRP composites. Eng Struct 32(10):3225–3234. doi: 10.1016/j.engstruct.2010.06.01110.1016/j.engstruct.2010.06.011 ↗
32. Zou GP, Naghipour M, Taheri F (2003) A nondestructive method for evaluating natural frequency of glued-laminated beams reinforced with GRP. Nondestruct Test Eval 19(1–2):53–65. doi: 10.1080/10589750310001596839