The effect of controlled permeable formwork liner on the mechanical properties of concrete
Source abstract
Abstract
Controlled permeable formwork (CPF) liner was developed primarily to improve the surface quality of concrete and thereby its durability. CPF liner allows air and water to escape from the surface adjacent to the formwork. This paper reports an experimental study carried out to investigate the influence of CPF liner on the strength and certain mechanical properties of concrete with three different water–cement (w–c) ratios. The specimens were prepared against CPF liner and impermeable steel formwork (IMF) and tested at various ages starting from 7 to 365 days. Various tests were conducted to assess surface quality; compressive, split tensile and flexural strengths, rebound hammer and abrasion resistance of concrete. The results indicate that CPF concrete performed better than IMF concrete in all aspects. The present investigation reveals that the use of CPF liner has significantly improved the tensile strength (say, 20 %) of concrete and the abrasion resistance has been enhanced to a remarkable level (50–80 %). Further, the surface quality is very essential to assess the cube strength of concrete and the existing testing method slightly underestimates the cube strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Cairns J (1999) Enhancements in surface quality of concrete through use of controlled permeability formwork liners. Mag Concr Res 51:73–8610.1680/macr.1999.51.2.73 ↗
2. Price WF, Widdows SJ (1991) The effect of permeable formwork on the surface properties of concrete. Mag Concr Res 43:93–10410.1680/macr.1991.43.155.93 ↗
3. Mehta PK, Monteiro PJM (2006) Concrete, microstructure, properties and materials, 3rd edn. McGraw-Hill, New York, pp 26, 73
4. Coutinho JS (2003) The combined benefits of CPF and RHA in improving the durability of concrete structure. Cem Concr Compos 25:51–5910.1016/S0958-9465(01)00055-5 ↗
5. Chen Cuicui, Liu Jianzhong, Cui Gong, Liu Jiaping (2012) Effect of controlled permeability formwork on the improvement of concrete performance. Procedia Eng 27:405–41110.1016/j.proeng.2011.12.468 ↗
6. Liu Jiaping, Miao Changwen, Chen Cuicui, Liu Jianzhong, Cui Gong (2013) Effect and mechanism of controlled permeable formwork on concrete water adsorption. Constr Build Mater 39:129–13310.1016/j.conbuildmat.2012.05.005 ↗
7. Brueckner R, Williamson SJ, Clark LA (2012) Rate of the thaumasite form of sulphate attack under laboratory conditions. Cem Concr Compos 34:365–36910.1016/j.cemconcomp.2011.11.023 ↗
8. Price WF (2000) Controlled permeability formwork. CIRIA Report, C 511
9. Adam AA, Law DW, Molyneaux T, Patnaikuni I, Aly T (2010) The effect of using controlled permeability formwork on the durability of concrete containing OPC and PFA. Aust J Civ Eng 6:1–1210.1080/14488353.2010.11463941 ↗
10. Basheer L, Nanukuttan SV, Basheer PAM (2008) The influence of reusing ‘Formtex’ controlled permeability formwork on strength and durability of concrete. Mater Struct 41:1363–137510.1617/s11527-007-9335-9 ↗
11. Arslan Metin (2001) The effects of permeable formworks with sucker liners on the physical properties of concrete surfaces. Constr Build Mater 15:149–15610.1016/S0950-0618(01)00008-3 ↗
12. Nolan E, Basheer PAM, Long AE (1995) Effects of three durability enhancing products on some physical properties of near surface concrete. Constr Build Mater 9:267–27210.1016/0950-0618(95)00020-G ↗
13. McKenna P (2010) The effect of controlled permeability formwork on carbonation-induced corrosion. In: Third FIB international congress, Scotland, pp 1–8
14. McCarthy MJ, Giannakou A, Jones MR (2000) Specifying concrete for chloride environments using controlled permeability formwork. Mater Struct 34:566–57610.1007/BF02482183 ↗
15. McCarthy MJ, Giannakou A (2002) In-situ performance of CPF concrete in a coastal environment. Cem Concr Res 32:451–45710.1016/S0008-8846(01)00706-2 ↗
16. IS: 8112 (1989) Specification for 43 grade ordinary Portland cement. Bureau of Indian Standards, New Delhi
17. IS: 383 (1987) Specification for coarse and fine aggregates from natural source for concrete. Bureau of Indian Standards, New Delhi
18. IS: 456 (2000) Plain and reinforced concrete, code of practice. Bureau of Indian Standards, New Delhi
19. IS: 9103 (1999) Specification for concrete admixtures. Bureau of Indian Standards, New Delhi
20. ASTM B 276 (2000) Standard test method for apparent porosity in cemented carbides. American Society for Testing Materials, New Mexico
21. IS: 516 (1959) Methods of tests for strength of concrete. Bureau of Indian Standards, New Delhi
22. IS: 5816 (1999) Method of test for splitting tensile strength of concrete. Bureau of Indian Standards, New Delhi
23. IS: 13311: Part 2 (1992) Methods of test for non-destructive testing of concrete, Bureau of Indian Standards, New Delhi
24. IS: 9284 (1979) Method of test for abrasion resistance of concrete. Bureau of Indian Standards, New Delhi
25. ASTM C 617 (2003) Standard practice for capping cylindrical concrete specimen. American Society for Testing Materials, New Mexico
26. Kasai Y, Nagano M, Sato K, Suga K (1998) Study on the evaluation of concrete quality prepared with permeable forms and plywood forms. Trans Jpn Concr Inst 10:59–66