journal article·2021-02Open access

Experimental and theoretical study of bond behaviour between FRP bar and high-volume fly ash-self-compacting concrete

Yu Zheng, Nuan Zhou, Lingzhu Zhou, Hexin Zhang, Haotian Li, Yingwu Zhou

Materials and Structures· Volume 54· Issue 1

Abstract

The combination of fibre-reinforced polymer (FRP) and high-volume fly ash self-compacting concrete (HVFA-SCC) reinforced is expected to solve the problem of steel corrosion in traditional structures and develop sustainable infrastructures. Bond behaviour has a strong effect on serviceability of FRP reinforced concrete structures. To achieve the acceptance of this novel composite structures in practical construction and design, it is significantly important to investigate the bond behaviour of FRP reinforced HVFA-SCC. In this study, a series of pull-out tests were carried out to investigate the bond behaviour of HVFA-SCC reinforced by FRP bar, which included bond strength, bond-slip response, and failure mode. The investigated experimental variables were reinforcing materials, surface treatment of FRP bars, bar diameters and concrete materials. The test results revealed that using HVFA-SCC resulted in higher average bond strength compared to those in the normal concrete test specimens. The reinforcing materials (steel vs. GFRP) had strong effect on bond behaviour, including bond strength, bond stiffness and failure mode. The failure mechanism of bond interaction between FRP and HVFA-SCC is dependent on friction and chemical adhesion. Subsequently, theoretical models for bond strength and development length were proposed. Finally, the parameters of analytical models of bond-slip curve are calibrated for GFRP reinforced HVFA-SCC by using the experimental data.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Chernin L, Val DV (2011) Prediction of corrosion-induced cover cracking in reinforced concrete structures. Constr Build Mater 25(4):1854–186910.1016/j.conbuildmat.2010.11.074 ↗
2. McLellan BC, Williams RP, Lay J, Riessen A et al (2011) Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement. J Clean Prod 19(9)10.1016/j.jclepro.2011.02.010 ↗
3. Lingzhu Z, Yu Z, Susan T (2018) Finite-element investigation of the structural behavior of basalt fiber reinforced polymer (BFRP)-reinforced self-compacting concrete (SCC) decks slabs in thompson bridge. Polymers 10(6):67810.3390/polym10060678 ↗
4. García-Taengua E, Sonebi M, Crossett P et al (2016) Performance of sustainable SCC mixes with mineral additions for use in precast concrete industry. J Sustain Cem Based Mater 5(3):157–17510.1080/21650373.2015.1024297 ↗
5. Sonebi M, Nanukuttan S (2009) Transport properties of self-consolidating concrete. ACI Mater J 106(2):161–166
6. Alghazali HH, Myers JJ (2017) Shear behavior of full-scale high volume fly ash-self consolidating concrete (HVFA-SCC) beams. Constr Build Mater 157:161–17110.1016/j.conbuildmat.2017.09.061 ↗
7. Yu Z, Lingzhu Z, Lipeng X, Yuanbin L, Taylor SE (2018) Investigation of the behaviour of scc bridge deck slabs reinforced with bfrp bars under concentrated loads. Eng Struct 171:500–51510.1016/j.engstruct.2018.05.105 ↗
8. Zheng Y, Zhou L, Taylor SE, Ma H (2019) Serviceability of one-way high-volume fly ash-self-compacting concrete slabs reinforced with basalt FRP bars. Constr Build Mater 217:108–12710.1016/j.conbuildmat.2019.05.044 ↗
9. Zheng Y, Zhou L, Xia L, Luo Y, Taylor SE (2018) Investigation of the behaviour of SCC bridge deck slabs reinforced with BFRP bars under concentrated loads. Eng Struct 171:500–51510.1016/j.engstruct.2018.05.105 ↗
10. Benmokrane B, Tighiouart B, Chaallal O (1996) Bond strength and load distribution of composite gfrp reinforcing bars in concrete. ACI Mater J 93(3):246–253
11. Malvar LJ (1995) Tensile and bond properties of gfrp reinforcing bars. ACI Mater J 92(3):276–285
12. Okelo R, Yuan RL (2005) Bond strength of fiber reinforced polymer rebars in normal strength concrete. J Compos Constr 9(3):203–21310.1061/(ASCE)1090-0268(2005)9:3(203) ↗
13. Achillides Z, Pilakoutas K (2004) Bond behavior of fiber reinforced polymer bars under direct pullout conditions. J Compos Constr 8(2):173–18110.1061/(ASCE)1090-0268(2004)8:2(173) ↗
14. Yu Z, Dongdong C, Lingzhu Z, Linsheng H, Hongwei M, Gangbing S (2018) Evaluation of the effect of fly ash on hydration characterization in self-compacting concrete (SCC) at very early ages using piezoceramic transducers. Sensors 18(8):248910.3390/s18082489 ↗
15. Zhou L, Zheng Y, Yu Y, Song G, Huo L, Guo Y (2020) Experimental study of mechanical and fresh properties of HVFA-SCC with and without pp fibers. Constr Build Mater10.1016/j.conbuildmat.2020.121010 ↗
16. Ojarestaghi SSM, Ajarostaghi SSM, Bhojaraju C (2020) A critical review of the effect of concrete composition on rebar–concrete interface (RCI) bond strength: a case study of nanoparticles. SN Appl Sci 2(5):1–23
17. Chen F, Li CQ, Baji H, Ma B (2019) Effect of design parameters on microstructure of steel-concrete interface in reinforced concrete. Cem Concr Res 119:1–1010.1016/j.cemconres.2019.01.005 ↗
18. Emadaldin M, Golafshani A, Rahai M (2014) Bond behavior of steel and GFRP bars in self-compacting concrete. Constr Build Mater10.1016/j.conbuildmat.2014.02.021 ↗
19. Sfikas IP, Trezos KG (2013) Effect of composition variations on bond properties of self-compacting concrete specimens. Constr Build Mater 41:252–26210.1016/j.conbuildmat.2012.11.094 ↗
20. Arezoumandi M, Wolfe MH, Volz JS (2013) A comparative study of the bond strength of reinforcing steel in high-volume fly ash concrete and conventional concrete. Constr Build Mater 40:919–92410.1016/j.conbuildmat.2012.11.105 ↗
21. Martí-Vargas JR, Serna P, Navarro-Gregori J, Bonet JL (2012) Effects of concrete composition on transmission length of prestressing strands. Constr Build Mater 27(1):350–35610.1016/j.conbuildmat.2011.07.038 ↗
22. Zhou L, Zheng Y, Li H, Song G (2020) Identification of bond behavior between FRP/steel bars and self-compacting concrete using piezoceramic transducers based on wavelet energy analysis. Arch Civ Mech Eng. https://doi.org/10.1007/s43452-020-00041-110.1007/s43452-020-00041-1 ↗
23. Arias JPM, Vazquez A, Escobar MM (2012) Use of sand coating to improve bonding between gfrp bars and concrete. J Compos Mater 46(18):2271–227810.1177/0021998311431994 ↗
24. ACI Committee (2012) ACI 440.3 R-2012 guide test methods for fiber-reinforced polymer (FRP) composites.American Concrete Institute, Farmingon Hills
25. Kuo WT, Liu MY, Juang CU (2019) Bonding behavior of repair material using fly-ash/ground granulated blast furnace slag-based geopolymer. Materials 12(10):169710.3390/ma12101697 ↗
26. Wang YL, Wang WD, Guan XM (2011) Physical filling effects of limestone powders with different particle size. Adv Mater Res 163–167:1419–1424
27. Baena M, Torres L, Turon A, Barris C (2009) Experimental study of bond behaviour between concrete and frp bars using a pull-out test. Compos A Appl Sci Manuf 40b(8):784–797
28. Danying G, Benmokrane B (2001) Influential factors of bond properties between fiber reinforced polymer (frp) rebars and concrete. Ind Constr
29. Bazant ZP, Sener S (1988) Size effect in pullout tests. ACI Mater J 85(5):347–351
30. Wu C, Chen G (2015) Unified model of local bond between deformed steel rebar and concrete: indentation analogy theory and validation. J Eng Mech 141(10):0401503810.1061/(ASCE)EM.1943-7889.0000945 ↗
31. Darwin D, Graham EK (1993) Effect of deformation height and spacing on bond strength of reinforcing bars. ACI Mater J 90(6):646–657
32. Gu X, Yu B, Wu M (2016) Experimental study of the bond performance and mechanical response of gfrp reinforced concrete. Constr Build Mater 114:407–41510.1016/j.conbuildmat.2016.03.211 ↗
33. Rukzon S, Chindaprasirt P (2013) Chloride penetration and corrosion resistance of ground fly ash blende. Int J Mater Res 102(3):335–33910.3139/146.110479 ↗
34. CEB-FIP, Model Code 1990 (1990) Comité Euro-International de Béton.Thomas Telford Services Ltd., London
35. ACI Committee (2006) ACI 440.1R-06 Guide for the design and construction of concrete reinforced with FRP bars. American Concrete Institute, Farmingon Hills
36. ACI Committee (2003) ACI 440.1R-03 Guide for the design and construction of concrete reinforced with FRP bars.American Concrete Institute, Farmingon Hills10.1061/40753(171)158 ↗
37. CEB-FIP (2007) FRP reinforcement in RC structures. Fib bulletin 40. International Federation for Structural Concrete (FIB)
38. Choi DU, Chun SC, Ha SS (2012) Bond strength of glass fibre-reinforced polymer bars in unconfined concrete. Eng Struct 34:303–31310.1016/j.engstruct.2011.08.033 ↗
39. He Z, Tian GW (2011) Probabilistic evaluation of the design development length of a gfrp rod pull-out from concrete. Eng Struct 33(10):2943–295210.1016/j.engstruct.2011.06.019 ↗
40. Lee JY, Kim TY, Kim T, Yi CK, Park JS, You YC et al (2008) Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete. Compos B Eng 39B(2):258–27010.1016/j.compositesb.2007.03.008 ↗
41. Mousavi S, Dehestani M, Mousavi S (2016) Bond strength and development length of glass fiber-reinforced polymer bar in unconfined self-consolidating concrete. J Reinf Plast Compos 35(11):924–94110.1177/0731684416632930 ↗
42. Cosenza E, Manfredi G, Realfonzo R (1995) Analytical modelling of bond between FRP reinforcing bars and concrete. Non-metallic (FRP) reinforcement for concrete structures. In: Proceedings of the second international RILEM symposium (FRPRCS-2)
43. Antonietta Aiello M, Leone M, Pecce M (2007) Bond performances of frp rebars-reinforced concrete. J Mater Civ Eng 19(3):205–21310.1061/(ASCE)0899-1561(2007)19:3(205) ↗
44. Rossetti VA, Galeota D, Giammatteo MM (1995) Local bond stress-slip relationships of glass fibre reinforced plastic bars embedded in concrete. Mater Struct 28(6):340–34410.1007/BF02473149 ↗
45. Eligehausen R, Popov EP, Bertero VV (2016) Local bond stress–slip relationships of deformed bars under generalized excitations