Structural response of grid-reinforced bituminous pavements
Source abstract
Abstract
Grid reinforcement is becoming a standard construction and rehabilitation technique to improve the performance of bituminous pavements. Currently, selection of the appropriate grid type and position is based on empirical criteria or derived from the results of laboratory tests which consider a single aspect of the mechanical behavior of the grid-reinforced systems. An improvement in the existing design and testing approaches could be obtained considering the actual response of grid-reinforced systems under vehicular loads. An instrumented pavement section was constructed to achieve this objective by installing a glass fiber polymer grid (FP) and a carbon fiber/glass fiber grid (CF) inside a double-layered asphalt surfacing along an in-service road. This pavement is part of a wider project which also involves a RILEM inter-laboratory test on the same reinforced systems. The pavement response to falling weight deflectometer (FWD) and real-scale truck loads was measured using pressure cells and asphalt strain gauges installed inside the pavement. A layered elastic theory (LET) model was adopted to perform both back-calculation of layer moduli and forward-calculation (simulation) of pavement stress and strain. The FWD and the real-scale tests yielded congruent results highlighting that the strain field inside the double-layered surfacing was considerably reduced by the installation of the CF/glass fiber grid whereas the glass FP grid was probably too stiff, potentially leading to interface debonding. The LET model proved to be a simple and effective tool for a first-approach analysis of the reinforcement pavement response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. O’Farrell DJ (1996) The treatment of reflective cracking with modified asphalt and reinforcement. In: Proceedings of the 3rd international RILEM conference on reflective cracking in pavements, Maastricht
2. Lee SJ (2008) Mechanical performance and crack retardation study of a fiberglass-gridreinforced asphalt concrete system. Can J Civ Eng 35(10):1042–104910.1139/L08-049 ↗
3. Zielnski P (2008) Fatigue investigations of asphalt concrete beams reinforced with geosynthetics interlayer. In: Proceedings of the 6th RILEM international conference on cracking in pavements, Chicago, pp. 751–75910.1201/9780203882191.ch73 ↗
4. Kim H, Sokolov K, Poulikakos LD, Partl MN (2009) Fatigue evaluation of carbon FRP reinforced porous asphalt composite system using a model mobile load simulator. Transp Res Rec 2116:108–11710.3141/2116-14 ↗
5. Virgili A, Canestrari F, Grilli A, Santagata FA (2009) Repeated load test on bituminous systems reinforced by geosynthetics. Geotext Geomembr 27(3):187–19510.1016/j.geotexmem.2008.11.004 ↗
6. Ferrotti G, Canestrari F, Pasquini E, Virgili A (2012) Experimental evaluation of the influence of surface coating on fiberglass geogrid performance in asphalt pavements. Geotext Geomembr 34:11–1810.1016/j.geotexmem.2012.02.011 ↗
7. Komatsu T, Kikuta H, Tuji Y, Muramatsu E (1998) Durability assessment of geogrid-reinforced asphalt concrete. Geotext Geomembr 16:257–27110.1016/S0266-1144(97)10011-5 ↗
8. Montestruque G, Rodrigues R, Nods M, Elsing A (2004) Stop of reflective crack propagation with the use of PET geogrid as asphalt overlay reinforcement. In: Proceedings of the 5th international RILEM conference on reflective cracking in pavements, Limoges
9. Sobhan K, Crooks T, Tandon V, Mattingly S (2004) Laboratory simulation of the growth and propagation of reflection cracks in geogrid reinforced asphalt overlay. In: Proceedings of the 5th international RILEM conference on reflective cracking in pavements, Limoges
10. Penman J, Hook KD (2008) The use of geogrids to retard reflective cracking on airport runways,taxiways and aprons. In: Proceedings of the 6th international RILEM conference on cracking in pavements, Chicago, pp. 713–720
11. Zamora-Barraza D, Calzada-Perz M, Castro-Fresno D, Vega-Zamanillo A (2011) Evaluation of anti-reflective cracking systems using geosynthetics in the interlayer zone. Geotext Geomembr 29:130–13610.1016/j.geotexmem.2010.10.005 ↗
12. Brown SF, Thom NH, Sanders PJ (2001) A study of grid reinforced asphalt to combat reflection cracking. J Assoc Asph Paving 70:543–569
13. Canestrari F, Pasquini E, Belogi L (2012) Optimization of geocomposites for double-layered bituminous systems. In: RILEM bookseries, Springer, The Netherlands, vol. 4, pp. 1229–123910.1007/978-94-007-4566-7_117 ↗
14. Zamora-Barraza D, Calzada-Perz M, Castro-Fresno D, Vega-Zamanillo A (2010) New procedure for measuring adherence between a geosynthetic material and a bituminous mixture. Geotext Geomembr 28:483–48910.1016/j.geotexmem.2009.12.010 ↗
15. Canestrari F, Ferrotti G, Lu X, Millien A, Partl MN, Petit C, Phelipot-Mardel A, Piber H, Raab C (2012) Mechanical testing of interlayer bonding in asphalt pavements. RILEM State Art Rep 9:303–36010.1007/978-94-007-5104-0_6 ↗
16. Al-Qadi IL, Dessouky S, Tutumluer E, Kwon J (2011) Geogrid mechanism in low-volume flexible pavements: accelerated testing of full-scale heavily instrumented pavement sections. Int J Pavement Eng 12(2):121–13510.1080/10298436.2010.535534 ↗
17. Siriwardane H, Gondle R, Kutuk B (2010) Analysis of flexible pavements reinforced with geogrids. Geotech Geol Eng 28:287–29710.1007/s10706-008-9241-0 ↗
18. Hornych P, Kerzreho JP, Sohm J, Chabot A, Trichet S, Joutang JL, Bastard N (2012) Full scale tests on grid reinforced flexible pavements on the French fatigue carrousel. In: RILEM bookseries, Springer, The Netherlands, vol. 4, pp. 1251–126010.1007/978-94-007-4566-7_119 ↗
19. Nguyen ML, Blanc J, Kerzreho JP, Hornych P (2013) Review of glass fibre grid use for pavement reinforcement and APT experiments at IFSTTAR. Road Mater Pavement Des 14(S1):287–30810.1080/14680629.2013.774763 ↗
20. Canestrari F, Belogi L, Ferrotti G, Graziani A (2013) Shear and flexural characterization of grid-reinforced asphalt pavements and relation with field distress evolution. Mater Struct. doi: 10.1617/s11527-013-0207-110.1617/s11527-013-0207-1 ↗
21. Millien A, Dragomir ML, Wendling L, Petit C, Iliescu M (2012) Geogrid interlayer performance in pavements: tensile-bending test for crack propagation. In: RILEM bookseries, Springer, The Netherlands, vol. 4, pp. 1209–121810.1007/978-94-007-4566-7_115 ↗
22. Graziani A, Virgili A, Belogi L (2011) Instrumented test section for the evaluation of geogrids in asphalt pavements. In: Proceedings of the 5th international conference on bituminous mixtures and pavements, Thessaloniki, pp. 1107–1117
23. Kinney TC, Yuan X (1995) Geogrid aperture rigidity by in-plane rotation. In: Proceedings Geosynthetics’95, Nashville, pp. 525–537
24. Pasquini E, Bocci M, Ferrotti G, Canestrari F (2013) Laboratory characterisation and field validation of geogrid-reinforced asphalt pavements. Road Mater Pavement Des 14(1):17–3510.1080/14680629.2012.735797 ↗
25. Ullidtz P (1987) Pavement analysis. Elsevier, New York
26. Henry KS, Clapp J, Davids WG, Barna L (2011) Back-calculated pavement layer modulus values of geogrid reinforced test sections. Geotechnical Special Publication, Dallas, vol. 211, pp. 4673–468210.1061/41165(397)478 ↗
27. Santagata FA, Partl MN, Ferrotti G, Canestrari F, Flisch A (2008) Layer characteristics affecting interlayer shear resistance in flexible pavements. J Assoc Asphalt Paving 77:221–256