Fresh concrete pressure on vertical and inclined formwork systems: full-scale experimental investigations and numerical modeling
Source abstract
Abstract
Abstract Purpose The lateral pressure of fresh concrete on formwork governs the structural safety and cost efficiency of formwork systems for concrete structures. While the behavior in vertical formworks has been extensively investigated, no systematic experimental data exist for inclined formworks, although they are increasingly applied in modern concrete construction. This study addresses the scientific question of the influence of inclination angle, concreting speed, concrete consistency, formwork width, reinforcement and vibration intensity on the fresh concrete pressure in inclined formwork systems. Methods A large-scale test program was carried out with 15 concreting tests, with vertical and inclined formwork systems being filled simultaneously. Pressure development was continuously monitored using both pressure sensors and anchor force measurements. The influence of fresh concrete properties, formwork width, casting rate, reinforcement and compaction methods was evaluated. In addition, a numerical model was developed to simulate the pressure distribution, calibrated and validated against the experimental data. Results The tests showed that inclined formwork exhibits significantly lower pressures than in vertical systems. These reductions were primarily attributed to increased friction effects and a more pronounced silo effect as well as a lower vibration influence. Systematic dependencies of concrete pressure were observed with respect to the angle of inclination, formwork thickness, concrete consistency, reinforcement, and vibration intensity. Numerical simulations reproduced these effects and provided recommendations for practical use. Conclusion This work provides the first comprehensive database on fresh concrete pressure on inclined formwork. The combined experimental–numerical approach enables more accurate design of formwork systems and offers guidance for future updates of international standards.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Construction Engineering and Safety · BIM and Construction Integration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Hamer D, Staples D (2021) Modern theatres 1950–2020. Routledge, New York
2. Kara H, Scott P (2007) Design and construction of the Phaeno Science Centre, Wolfsburg. Struct Eng 85(14):33–38
3. Hofstadler C (2008) Schalarbeiten. Springer, Berlin Heidelberg, Berlin, Heidelberg
4. Okrajnov-Bajic R, Vasovic D (2009) Self-compacting concrete and its application in contemporary architectural practice. Spatium. https://doi.org/10.2298/SPAT0920028O10.2298/SPAT0920028O ↗
5. Proske T, Khayat KH, Omran A et al (2014) Form pressure generated by fresh concrete: a review about practice in formwork design. Mater Struct 47(7):1099–1113. https://doi.org/10.1617/s11527-014-0274-y10.1617/s11527-014-0274-y ↗
6. ACI Committee 347 (2014) 347R-14: Guide to Formwork for Concrete
7. DIN 18218:2010-01 (2010) Frischbetondruck auf lotrechte Schalungen (Pressure of fresh concrete on vertical formwork). Beuth Verlag
8. Comite Euro-International du Beton (1977) BULLETIN D’INFORMATION NO 115 Manuel de Technologie Coffrage. Projet Avril 1977 établi par un Groupe Inter Associations CIB-CEB-FIP
9. AST G, FRÖHLICH K-C (1996) Gerüste und Schalungen. Holzbau-Taschenbuch. 875–921
10. Freund B, Proske T, Graubner C-A (2011) Frischbetondruck bei geneigten Schalungen − Sachstandbericht. Tagungsband des 21. Kassel-Darmstädter Baubetriebsseminars Schalungstechnik: Kap C1:1–11
11. TGL 33421/01 (1979) Betonbau. Schalverfahren. Standschalungen
12. Clear CA, Harrison TA (1985) Concrete pressure on formwork/C.A. Clear [and] T.A. Harrison. CIRIA report, vol 108. CIRIA, London
13. Ovarlez G, Roussel N (2006) A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork. Mater Struct 39(2):269–279. https://doi.org/10.1617/s11527-005-9052-110.1617/s11527-005-9052-1 ↗
14. Proske T, Graubner C-A (2010) Formwork pressure of highly workable concrete – experiments focused on setting, vibration and design approach. In: Design, Production and Placement of Self-Consolidating Concrete - SCC2010, Montreal, Canada. p 255–26710.1007/978-90-481-9664-7_22 ↗
15. Billberg PH, Roussel N, Amziane S et al (2014) Field validation of models for predicting lateral form pressure exerted by SCC. Cem Concr Compos. https://doi.org/10.1016/j.cemconcomp.2014.02.00310.1016/j.cemconcomp.2014.02.003 ↗
16. Assaad J, Khayat KH, Mesbah H (2003) Assessment of thixotropy of flowable and self-consolidating concrete. ACI Mat J 100(2):99–107
17. Proske T (2007) Frischbetondruck bei Verwendung von Selbstverdichtendem Beton (Formwork Pressure using Self-Compacting Concrete). Dissertation, vol 12. Technische Universität Darmstadt, Institut für Massivbau, Germany
18. Brameshuber W, Beitzel H, Beitzel M et al (2011) Formwork pressure induced by highly flowable concretes - material investigations and large-scale tests. Struct Concr 12(4):270–280. https://doi.org/10.1002/suco.20100001310.1002/suco.201000013 ↗
19. Shahin F, Nachum S, Shay Y et al. (2025) Measurement and analysis of concrete lateral pressure on vertical formwork using geotechnical tools: laboratory experiment. In: Hajdu M, Skibniewski M, Turk Z (eds) Proceedings of the 14th Creative Construction Conference (CCC 2025). International Association for Automation and Robotics in Construction (IAARC)10.22260/CCC2025/0055 ↗
20. Kwon SH, Phung QT, Park HY et al (2011) Effect of wall friction on variation of formwork pressure over time in self-consolidating concrete. Cem Concr Res 41(1):90–101. https://doi.org/10.1016/j.cemconres.2010.09.00910.1016/j.cemconres.2010.09.009 ↗
21. Dhir RK, McCarthy MJ, Caliskan S et al (2009) Concrete pressure on formwork: influence of cement combinations and superplasticising admixtures. Mag Concr Res 61(6):407–417. https://doi.org/10.1680/macr.2008.0003110.1680/macr.2008.00031 ↗
22. Shin TY, Han S, Lee JH et al (2024) Form pressure exerted by concrete for a large-scale structure: its quantification and physicochemical interpretation. Case Stud Constr Mater 20:e03304. https://doi.org/10.1016/j.cscm.2024.e0330410.1016/j.cscm.2024.e03304 ↗
23. Gallego E, Fuentes JM, Ramírez A et al (2010) Design of tall formworks by a finite-element model. J Constr Eng Manage 136(7):803–810. https://doi.org/10.1061/(ASCE)CO.1943-7862.000017710.1061/(ASCE)CO.1943-7862.0000177 ↗
24. Gallego E, Fuentes JM, Ramírez A et al (2011) Computer simulation of complex-shaped formworks using three-dimensional numerical models. Autom Constr 20(7):830–836. https://doi.org/10.1016/j.autcon.2011.03.00110.1016/j.autcon.2011.03.001 ↗
25. DIN EN 206:2021-06, Beton - Festlegung, Eigenschaften, Herstellung und Konformität; Deutsche Fassung EN 206:2013+A2:2021
26. Freund B (2017) Frischbetondruck lotrechter, geneigter und gekrümmter Betonbauteile bei Verwendung von Betonen mit hoher Fließfähigkeit. Dissertation, vol 34. Institut für Massivbau, Technische Universität Darmstadt, Germany
27. Drucker DC, Prager W (1952) Soil mechanics and plastic analysis or limit design. Quart Appl Math 10(2):157–165. https://doi.org/10.1090/qam/4829110.1090/qam/48291 ↗
28. Graubner C-A, Proske T (2009) Frischbetondruck bei Verwendung von Selbstverdichtendem Beton. Beton- Stahlbetonbau 104(2):88–96. https://doi.org/10.1002/best.20080065810.1002/best.200800658 ↗
29. Graubner C-A, Boska E, Motzko C et al (2012) Formwork pressure induced by highly flowable concretes - design approach and transfer into practice. Struct Concr 13(1):51–60. https://doi.org/10.1002/suco.20110001210.1002/suco.201100012 ↗