journal article·2011-05

Surface settlement of cementitious-based materials determined by oedometer testing

Joseph J. Assaad, Jacques Harb

Materials and Structures· Volume 44· Issue 4
Publisher page

Abstract

The oedometer test is commonly used in soil mechanics to evaluate consolidation of clays and other compressible soils. A research project was undertaken to evaluate the suitability of such test to assess surface settlement of freshly mixed cementitious-based materials. Three series of concrete-equivalent-mortar (CEM) mixtures made with different cement contents, water-to-cementitious materials ratio (w/cm), silica fume, and viscosity-modifying admixture (VMA) were tested. Validation of test results was performed by casting concrete mixtures in a PVC column having 600-mm height and 200-mm diameter. Test results have shown that CEM settlements determined using the oedometer test as well as concrete settlements determined using the 600-mm PVC column are affected quite similarly by the mixture composition. For example, for given consistency, settlement decreases with the increase in cement content, decrease in w/cm, and incorporation of increased concentrations of silica fume or VMA. Statistical analysis was then performed to propose regression models for predicting maximum settlement of concrete through the determination of CEM characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Khayat KH, Assaad J, Daczko J (2004) Comparison of field-oriented test methods to assess dynamic stability of self-consolidating concrete. ACI Mater J 101(2):168–176
2. Assaad J, Khayat KH, Daczko J (2004) Evaluation of static stability of self-consolidating concrete. ACI Mater J 101(3):168–176
3. Jolicoeur C, Khayat KH, Pavate TV, Pagé M, (2000) Evaluation of effect of chemical admixture and supplementary cementitious materials on stability of concrete-based materials using in situ conductivity method. In: Malhotra VM (ed) Proceedings of the sixth CANMET/ACI international conf, ACI SP 195–29, pp. 461–483
4. Manai K (1995) Evaluation of the effect of chemical and mineral admixtures on the workability, stability, and performance of self-compacting Concrete (available in French). Masters Thesis, Université de Sherbrooke, Canada, p 182
5. Schwartzentruber A, Catherine C (2000) Method of the concrete equivalent mortar (CEM)—a new tool to design concrete containing admixture. Mater Struct 33:475–48210.1007/BF02480524 ↗
6. Assaad J, Khayat KH (2004) Assessment of thixotropy of self-consolidating concrete and concrete-equivalent-mortar-effect of Binder composition and content. ACI Mater J 101(5):400–408
7. Assaad J, Harb J, Chakar E (2009) Relationships between key ASTM test methods determined on concrete and concrete-equivalent-mortar mixtures. J ASTM Int 6(3):1410.1520/JAI101735 ↗
8. Alexandridis A, Gardner NJ (1981) Mechanical behavior of fresh concrete. Cem Concr Res 11:323–33910.1016/0008-8846(81)90105-8 ↗
9. Gregori A, Ferron R, Sun Z, Shah S (2008) Experimental simulation of self-consolidating concrete formwork Pressure. ACI Mater J 105(1):97–104
10. Assaad J, Harb J, Khayat K (2009) Use of triaxial compression test on mortars to evaluate formwork pressure of SCC. ACI Mate J 106(5):9
11. Ramachandran VS, Malhotra VM, Jolicoeur C, Spiratos N (1998) Superplasticizers: properties and applications in concrete. CANMET, MTL 97–14 (TR), p 40010.4095/328653 ↗
12. Assaad J, Khayat KH (2006) Effect of viscosity-enhancing admixtures on formwork pressure and thixotropy of self-consolidating concrete. ACI Mater J 103(4):280–287
13. Yahia A, Khayat KH (2001) Experiment design to evaluate interaction of high-range water-reducer and antiwashout admixture in high-performance cement grout. Cem Concr Res 31:749–75710.1016/S0008-8846(01)00496-3 ↗
14. Sonebi M (2001) Factoriel design modelling of mix proportion parameters of underwater composite cement grouts. Cem Concr Res 31:1553–156010.1016/S0008-8846(01)00583-X ↗