journal article·2017-02

Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres

Kim Hung Mo, See Heng Goh, U. Johnson Alengaram, Phillip Visintin, Mohd Zamin Jumaat

Materials and Structures· Volume 50· Issue 1
Publisher page

Abstract

This paper presents an experimental investigation of the mechanical, toughness, bond and some durability-related properties of oil palm shell lightweight concrete (OPSC) containing up to 1.0 % steel fibres. While the inclusion of up to 1.0 % steel fibres gave enhanced tensile and bond strength as well as toughness to the OPSC, little influence was noticed in the case of the compressive strength and modulus of elasticity of the concrete. When some durability-related properties was investigated, it was found that the OPSC containing 0.5 % steel fibres showed no deterioration of the permeation properties, whereas further increase to 0.75 and 1.0 % steel fibre volume resulted in the increase in the water absorption and sorptivity values. On the other hand, reduction of up to 21 % of the OPSC drying shrinkage could be attained in the presence of up to 1.0 % steel fibres.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Chandra S, Berntsson L (2002) Lightweight aggregate concrete: science, technology, and applications. William Andrew Publication, New York
2. Gao J, Sun W, Morino K (1997) Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete. Cem Concr Compos 19(4):307–31310.1016/S0958-9465(97)00023-1 ↗
3. Balendran RV, Zhou FP, Nadeem A, Leung AYT (2002) Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete. Build Environ 37(12):1361–136710.1016/S0360-1323(01)00109-3 ↗
4. Ganesan N, Indira PV, Sabeena MV (2014) Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete. Constr Build Mater 50:108–11510.1016/j.conbuildmat.2013.09.032 ↗
5. Yap SP, Alengaram UJ, Jumaat MZ, Khaw KR (2015) Torsional behaviour of steel-fibre reinforced oil palm shell concrete beams. Mater Des 87:854–86210.1016/j.matdes.2015.08.078 ↗
6. Zhang MH, Li L, Paramasivam P (2004) Flexural toughness and impact resistance of steel-fibre-reinforced lightweight concrete. Mag Concr Res 56(5):251–26210.1680/macr.2004.56.5.251 ↗
7. Zhao Y, Lin H, Wu K, Jin W (2013) Bond behaviour of normal/recycled concrete and corroded steel bars. Constr Build Mater 48:348–35910.1016/j.conbuildmat.2013.06.091 ↗
8. Guneyisi E, Gesoglu M, Ozturan T, Ipek S (2015) Fracture behavior and mechanical properties of concrete with artificial lightweight aggregate and steel fiber. Constr Build Mater 84:156–16810.1016/j.conbuildmat.2015.03.054 ↗
9. Wang HT, Wang LC (2013) Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete. Constr Build Mater 38:1146–115110.1016/j.conbuildmat.2012.09.016 ↗
10. Chen B, Liu J (2004) Properties of lightweight expanded polystyrene concrete reinforced with steel fiber. Cem Concr Res 34(7):1259–126310.1016/j.cemconres.2003.12.014 ↗
11. Campione G, Miraglia N, Papia M (2001) Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates. Mater Struct 34(4):201–21010.1007/BF02480589 ↗
12. Duzgun OA, Gul R, Aydin AC (2005) Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete. Mater Lett 59:3357–336310.1016/j.matlet.2005.05.071 ↗
13. Mo KH, Alengaram UJ, Visintin P, Goh SH, Jumaat MZ (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Constr Build Mater 84:377–38610.1016/j.conbuildmat.2015.03.040 ↗
14. Mo KH, Alengaram UJ, Jumaat MZ, Liu MYJ, Lim J (2016) Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand. J Clea Prod 112:763–77010.1016/j.jclepro.2015.06.122 ↗
15. Leung H, Balendran RV (2003) Properties of fresh polypropylene fibre reinforced concrete under the influence of pozzolans. J Civ Eng Manag 9(4):271–27910.1080/13923730.2003.10531339 ↗
16. Hassanpour M, Shafigh P, Mahmud HB (2014) Mechanical properties of structural lightweight aggregate concrete containing low volume steel fiber. Arab J Sci Eng 39(5):3579–359010.1007/s13369-014-1023-9 ↗
17. Chen B, Liu J (2005) Contribution of hybrid fibres on the properties of the high-strength lightweight concrete having good workability. Cem Concr Res 35(5):913–91710.1016/j.cemconres.2004.07.035 ↗
18. Shafigh P, Mahmud H, Jumaat MZ (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Mater Des 32(7):3926–393210.1016/j.matdes.2011.02.055 ↗
19. Mo KH, Yap KKQ, Alengaram UJ, Jumaat MZ (2014) The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete. Constr Build Mater 55:20–2810.1016/j.conbuildmat.2013.12.103 ↗
20. Yap SP, Alengaram UJ, Jumaat MZ (2015) The effect of aspect ratio and volume fraction on mechanical properties of steel fibre-reinforced oil palm shell concrete. J Civ Eng Manag 22(2):168–17710.3846/13923730.2014.897970 ↗
21. Balaguru P, Foden A (1996) Properties of fiber reinforced structural lightweight concrete. ACI Struct J 93(1):62–78
22. Sivakumar A, Santhanam M (2007) Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres. Cem Concr Compos 29(8):603–60810.1016/j.cemconcomp.2007.03.006 ↗
23. Domagala L (2011) Modification of properties of structural lightweight concrete with steel fibres. J Civ Eng Manag 17(1):36–4410.3846/13923730.2011.553923 ↗
24. Kayali O, Haque MN, Zhu B (2003) Some characteristics of high strength fiber reinforced lightweight aggregate concrete. Cem Concr Compos 25(2):207–21310.1016/S0958-9465(02)00016-1 ↗
25. Yap SP, Bu CH, Alengaram UJ, Mo KH, Jumaat MZ (2014) Flexural toughness characteristics of steel-polypropylene hybrid fibre-reinforced oil palm shell concrete. Mater Des 57:652–65910.1016/j.matdes.2014.01.004 ↗
26. Campione G, Cucchiara C, La Mendola L, Papia M (2005) Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions. Eng Struct 27(6):881–89010.1016/j.engstruct.2005.01.010 ↗
27. Guneyisi E, Gesoglu M, Ipek S (2013) Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes. Constr Build Mater 47:358–36510.1016/j.conbuildmat.2013.05.059 ↗
28. Mo KH, Alengaram UJ, Jumaat MZ, Yap SP (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. J Clea Pro 91:297–30410.1016/j.jclepro.2014.12.021 ↗
29. Arezoumandi M, Wolfe MH, Volz JS (2013) A comparative study of the bond strength of reinforcing steel in high-volume fly ash concrete and conventional concrete. Constr Build Mater 40:919–92410.1016/j.conbuildmat.2012.11.105 ↗
30. Soylev TA (2011) The effect of fibers on the variation of bond between steel reinforcement and concrete with casting position. Constr Build Mater 25(4):1736–174610.1016/j.conbuildmat.2010.11.093 ↗
31. Won J, Park C, Kim H, Lee S, Jang C (2008) Effect of fibers on the bonds between FRP reinforcing bars and high-strength concrete. Compos Part B 39(5):747–75510.1016/j.compositesb.2007.11.005 ↗
32. Kim B, Doh J-H, Yi C-K, Lee J-Y (2013) Effects of structural fibers on bonding mechanism changes in interface between GFRP bar and concrete. Compos Part B 45(1):768–77910.1016/j.compositesb.2012.09.039 ↗
33. Dancygier AN, Katz A, Wexler U (2010) Bond between deformed reinforcement and normal and high-strength concrete with and without fibers. Mater Struct 43(6):839–85610.1617/s11527-009-9551-6 ↗
34. Ezeldin SA, Balaguru PN (1989) Bond behavior of normal and high strength fibre reinforced concrete. ACI Mater J 86:515–524
35. Soylev TA, Ozturan T (2014) Durability, physical and mechanical properties of fiber-reinforced concretes at low-volume fraction. Constr Build Mater 73:67–7510.1016/j.conbuildmat.2014.09.058 ↗
36. Frazao C, Camoes A, Barros J, Goncalves D (2015) Durability of steel fiber reinforced self-compacting concrete. Constr Build Mater 80:155–16610.1016/j.conbuildmat.2015.01.061 ↗
37. Nili M, Afroughsabet V (2012) The long-term compressive strength and durability properties of silica fume fiber-reinforced concrete. Mater Sci Eng, A 531:107–11110.1016/j.msea.2011.10.042 ↗
38. Teo DCL, Mannan MA, Kurian VJ, Ganapathy C (2007) Lightweight concrete made from oil palm shell (OPS): structural bond and durability properties. Build Environ 42(7):2614–262110.1016/j.buildenv.2006.06.013 ↗
39. Shafigh P, Alengaram UJ, Mahmud HB, Jumaat MZ (2013) Engineering properties of oil palm shell lightweight concrete containing fly ash. Mater Des 49:613–62110.1016/j.matdes.2013.02.004 ↗
40. Kayali O, Haque MN, Zhu B (1999) Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash. Cem Concr Res 29(11):1835–184010.1016/S0008-8846(99)00179-9 ↗
41. Hossain KMA (2004) Properties of volcanic pumice based cement and lightweight concrete. Cem Concr Res 34(2):283–29110.1016/j.cemconres.2003.08.004 ↗
42. Mannan MA, Ganapathy C (2002) Engineering properties of concrete with oil palm shell as coarse aggregate. Constr Build Mater 16(1):29–3410.1016/S0950-0618(01)00030-7 ↗
43. Gesoglu M, Ozturan T, Guneyisi E (2004) Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates. Cem Concr Res 34(7):1121–113010.1016/j.cemconres.2003.11.024 ↗
44. Demirboga R, Kan A (2012) Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes. Constr Build Mater 35:730–73410.1016/j.conbuildmat.2012.04.105 ↗
45. Neville AM (1973) Properties of concrete. Pitman, London
46. Zhang J, Li VC (2001) Influences of fibers on drying shrinkage of fiber-reinforced cementitious composite. J Eng Mech 127(1):37–4410.1061/(ASCE)0733-9399(2001)127:1(37) ↗
47. Zhang M, Li L, Paramasivam P (2005) Shrinkage of high-strength lightweight aggregate concrete exposed to dry environment. ACI Mater J 102(2):86–92