Towards a methodology for estimating strength and collapse mechanism in masonry arches strengthened with fibre reinforced polymer applied on external surfaces
Source abstract
Abstract
Assessment of the effects of the application of advanced materials and new technologies on traditional structures has assumed a major relevance within the ongoing debate on the preservation of historic buildings. The aim of the present paper is to discuss the validity of analytical models, by means of experimental investigations carried out on masonry arches reinforced with CFRP strips, bonded at the intrados or extrados with distinct configurations. A theoretical prediction of ultimate strength for the different reinforcement configurations was derived in agreement with the occurrences observed during the experiments (masonry crushing, FRP rupture, debonding, sliding along the mortar joint). The results of the experimental trials allowed not only to validate the proposed analytical derivations but also to evaluate the impact of different reinforcement configurations on the strength of masonry arches and then to deduce considerations on sizing criteria for the CFRP strengthening of traditional masonry structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. ACI 440-F (1997) Guidelines for selection, design and installation of FRP systems for externally strengthening concrete structures. ACI/440-F/440-01B rpt draft of 17/01/97
2. Ascione L, Feo L (2000) Modelling of composite/concrete interface of RC beams strengthened with composite laminate. Compos Part B Eng 31(6/7):535–54010.1016/S1359-8368(99)00063-3 ↗
3. Bikerman JJ (1957) Theory of peeling through a Hookean solid. J Appl Phys 28(12):1484–148510.1063/1.1722682 ↗
4. Brencich A, Gambarotta L (2005) Mechanical response of solid clay brickwork under eccentric loading. Part II: CFRP reinforced masonry. Mater Struct 38:267–27310.1007/BF02479352 ↗
5. Briccoli Bati S, Rovero L, Tonietti U (2007) Strengthening masonry arches with composite materials. J Compos Constr ASCE 11:33–4110.1061/(ASCE)1090-0268(2007)11:1(33) ↗
6. Christensen JB, Gilstrap J, Dolan C (1996). Composites material Reinforcement of existing masonry walls. J Architect Eng ASCE 2(2):63–7010.1061/(ASCE)1076-0431(1996)2:2(63) ↗
7. Como M, Ianniruberto U, Imbimbo M (2001) On the structural capacity of masonry arches strengthened by FRP. III International Conference on Arch Bridges, Paris, pp 277–282
8. Fanning P, Kelly O (1999) Shear strengthening of reinforced concrete beams: an experimental study using CFRP plates. Structural Faults + Repair 99, London
9. Foraboschi P (2004) Strengthening of masonry arches with fiber-reinforced polymer strips. J Compos Constr ASCE 8(3):191–20210.1061/(ASCE)1090-0268(2004)8:3(191) ↗
10. Garden HN, Quantrill RJ, Hollaway LC et al (1998) An experimental study of the anchorage length of carbon fiber composite plate used to strengthen reinforced concrete beams. Construct Build Mater 12:203–21910.1016/S0950-0618(98)00002-6 ↗
11. Hamilton HR, Dolan CW (2001) Flexural capacity of glass FRP strengthened concrete masonry walls. J Comp Constr ASCE 5:170–17810.1061/(ASCE)1090-0268(2001)5:3(170) ↗
12. Hamoush S, McGinley M, Mlakar P, Scott D, Murray K (2001) Out-of-plane strengthening of masonry walls with reinforced composites. J Comp Constr ASCE 5:139–14510.1061/(ASCE)1090-0268(2001)5:3(139) ↗
13. Hendry AW (1981) Structural brickwork. The Macmillan Press, London10.1007/978-1-349-81439-8 ↗
14. Heyman J (1982) The masonry Arch. Hellis Horwood limited Publ., Chichster
15. Ianniruberto U, Imbimbo M, Rinaldi Z (2003) Comparison between steel chain reinforcement and FRP strengthening of masonry frames. In: Int. Conf. Composites in Constructions, Editoriale Bios, pp 489–494
16. Man W, Müller H (1982) Failure of shear-stressed masonry an enlarged theory, tests and application to shear walls. Proc Br Ceram Soc 30:223–235
17. Melbourne C, Gilbert M (1995) The behaviour of multi-ring brickwork arch bridges. Struct Eng 73(3):39–47
18. Nanni A (1993) Fiber_reinforced_plastic reinforcement for concrete structures: properties and applications. Elsevier, Amsterdam
19. Schwegler G (1994) Strengthening of masonry with fiber composites. PhD thesis, Federal Institute of Technology, Zűrich, Switzerland (in German)
20. Smith ST, Teng JG (2002) FRP-strengthened RC beams. I. Review of debonding strength models. Eng Struct 24:385–39510.1016/S0141-0296(01)00105-5 ↗
21. Tan KH, Patoary MKH (2004) Strengthening of masonry walls against out-of-plane loads using reinforced polymer reinforcement. J Compos Constr ASCE 8(1):79–8710.1061/(ASCE)1090-0268(2004)8:1(79) ↗
22. Triantafillou TC (1998) Strengthening of masonry structures using epoxy-bonded FRP laminates. J Compos Constr ASCE 2(2):96–10410.1061/(ASCE)1090-0268(1998)2:2(96) ↗
23. Triantafillou TC, Fardis MN (1997) Strengthening of historic masonry structures with composite materials. Mater Struct RILEM 30(202):486–49610.1007/BF02524777 ↗
24. Valluzzi MR, Valdemarca M, Modena C (2001) Behavior of brick masonry vaults strengthened by FRP laminates. J Compos Constr ASCE 5(3):163–16910.1061/(ASCE)1090-0268(2001)5:3(163) ↗
25. Zhao YH, Weng GJ (1990) Effective elastic moduli of ribbon-reinforced composites. J Appl Mech 57:158–16710.1115/1.2888297 ↗