A study on sampling methods for chloride profiles: simulations using data from EPMA
Source abstract
Abstract
Investigating marine concrete by determining the chloride profile is a common way for making a prediction of the remaining service life of a structure. The most common methods of sampling concrete for this purpose is dust sampling by dry drilling or sampling cores which are analyzed by profile grinding in a laboratory. Now, a similar study has been performed, by simulating different sampling techniques in data from EPMA. The results from the simulations of the concrete specimen analyzed with the EPMA, confirm the results from earlier performed dry drilling tests in laboratory and shows the same extensive variations when chloride content is presented as % by weight of concrete instead of as % by weight of calcium oxide. Comparing the results from the earlier performed sampling by dry drilling with the results from the EPMA simulations, it is seen that the dry drilling probably is afflicted with a systematic error by “movement” of dust into the sampling holes when drilling. This study also shows effects of large aggregates in small bores even though the cement content is referred to. However, no signs of “shadowing” by the aggregates was detected when the simulations where performed. Even “horizontal” drilling was simulated in order to be able to detect this possible effect of the aggregates on the chloride ingress into the concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Wall H, Nilsson L-O (2006) Chloride profiling in concrete harbour structures—a study of extensive variations. In: 2nd International symposium on advances in concrete through science and engineering. RILEM Publications S.A.R.L., Quebec City10.1617/2351580028.112 ↗
2. Farstad T, Gran HC, Reknes K (1993) Measurements of chlorides in concrete—sampling techniques. NBI report 137-1993, Nordtest technical report 209. Norwegian Building Institute (NBI)
3. de Rooij MR, Polder RB (2005) Probabalistic approach for local chloride heterogeneity near reinforcement. In: Application of codes, design and regulations, 6th international congress, theme two: service life and durability design. University of Dundee, Scotland, UK: Thomas Telford Ltd
4. Nilsson L-O (2003) Torshamnen, oil pier, concrete damages—additional investigations, service-life assessments. (in Swedish). Div. of Building Materials, Lund Institute of Technology, Lund, Lund
5. Goltermann P (2004) Variation of chloride profiles in homogeneous areas. Mater Struct 37:608–61410.1007/BF02483290 ↗
6. Wall H, Nilsson L-O (2005) Initial survey of concrete structures in Swedish harbours—a case study in The Port of Trelleborg. In: International conference on concrete repair, rehabilitation and retrofitting (ICCRRR). Taylor & Francis/Balkema, Cape Town
7. Gjørv OE (1968) Durability of reinforced concrete wharves in Norwegian harbours. Ingeniörforlaget A/S Oslo, Oslo, p 208
8. Mori D et al (2006) Applications of electron probe microanalyzer for measurement of Cl concentration profile in concrete. J Adv Concrete Technol 4(3):1–1510.3151/jact.4.369 ↗