journal article·2016-11

Numerical modelling and evaluation of laboratory tests with impact loaded young concrete prisms

Lamis Ahmed, Anders Ansell, Richard Malm

Materials and Structures· Volume 49· Issue 11
Publisher page

Abstract

Numerical modelling in combination with in situ measurements, observations and laboratory testing will be important to future establishment of reliable guidelines for efficient civil and engineering work involving concrete casting close to e.g. blasting operations. Results from laboratory tests with impact loaded young concrete prisms are here evaluated using a 3D finite element model. Solid elements are used implementing a non-linear material model, capable of describing cracking during stress wave propagation. The position of cracks and measured particle vibration velocities are calculated and compared with laboratory test results. The damaging effect of impact vibrations is evaluated using crack width and fracture energy as damage criteria. Alternative geometry for the test prisms, with a notched section, is analysed. This will give one wide crack at the centre of the prism instead of two or three cracks distributed over its length which will make future laboratory test more efficient and reliable. Recommended damage limits at concrete ages of 4, 6, 8 and 12 h are given, based on numerical calculations for concrete strength class C25 and C50.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Kwan AKH, Zheng W, Lee PKK (2002) Shock vibration test of concrete. ACI Mater J 99(4):361–370
2. Kwan AKH, Zheng W, Ng IYT (2005) Effects of shock vibration on concrete. ACI Mater J 102(6):405–413
3. Krell W (1979) The effect of coal mill vibration of fresh concrete. Concr Int 1(12):31–34
4. Howes EW (1979) Effects of blasting vibrations on curing concrete. In: proceedings of the 20th United States symposium on rock mechanics, University of Texas, Austin, 455–458
5. Dunham MR, Rush AS, Hanson JH (2007) Effects of induced vibrations on early age concrete. J Perform Constr Facil 21(3):179–18410.1061/(ASCE)0887-3828(2007)21:3(179) ↗
6. Tawfiq K, Mtenga P, Sobanjo J (2010) Effect of construction induced vibrations on green concrete in drilled shafts. J Mater Civ Eng 22(6):637–64210.1061/(ASCE)MT.1943-5533.0000089 ↗
7. Siwula J, Helwany S, Richard L (2011) Construction vibration attenuation with distance and its effect on the quality of early age concrete, WHRP 11-02, Wisconsin Highway Research Program
8. Revey GF (2006) Managing rock blasting work in urban environments. Pract Period Struct Desi Constr 11(2):86–9210.1061/(ASCE)1084-0680(2006)11:2(86) ↗
9. Dowding CH (1996) Construction vibrations. Prentice Hall, Upper Saddle River
10. Oriard LL, Coulson JH (1980) TVA blast load criteria for mass concrete. Minimizing Detrimental Construction Vibrations ASCE 80–175:101–123
11. Ansell A, Ahmed L (2015) Impact load vibrations on young concrete. Submitted to Structural Concrete
12. Esteves JM (1978) Control of Vibration Caused by Blasting. Memoria 409, Laboratorio de Engenharia Civil, Ministerio da Habitacao e Obras Publicas, Lisbon
13. Gao Z, Zhu Q, Huang X, Huang X (2012) Experimental research and numerical analysis of the effects of blasting vibration on young concrete. 12th COTA international conference of transportation professionals: multimodal transportation systems—convenient, safe, cost-effective, efficient, CICTP 2012, Beijing; China10.1061/9780784412442.304 ↗
14. Ansell A, Silfwerbrand J (2003) The vibration resistance of young and early age concrete. Struct Concr 4(3):125–13410.1680/stco.2003.4.3.125 ↗
15. RILEM commission 42-CEA (1981) Properties of set concrete at early ages state-of-the-art-report. Mater Struct 14(6):399–450
16. EN 1992-1-1 (2004) Eurocode 2 Design of concrete structures- Part 1-1: General rules and rules for buildings. European Committee for Standardisation (CEN), Brussels
17. EN 12390-3 (2009) Testing hardened concrete-Part 3: Compressive strength of test specimens
18. International Federation for Structural Concrete (2013) Fib Model code for concrete structures 2010. Wilhelm Ernst & Sohn, Berlin
19. Swedish Concrete Association (2012) Swedish Concrete Association handbook to Eurocode 2 (in Swedish). Vol. I-II, Stockholm
20. Oluokun FA (1991) Prediction of concrete tensile strength from its compressive strength: evaluation of existing relations for normal weight concrete. ACI Mater J 88(3):302–309
21. Nihal Arιoglu Z, Girgin C, Arιoglu E (2006) Evaluation of ratio between splitting tensile strength and Compressive Strength for Concretes up to 120 MPa and its Application in Strength Criterion. ACI Mater J 103(1):18–24
22. Oluokun FA, Burdette EG, Deatherage JH (1991) Splitting tensile strength and compressive strength relationships at early ages. ACI Mater J 88(2):115–121
23. Oluokun FA, Burdette EG, Deatherage JH (1991) Elastic modulus, Poisson’s ratio and compressive strength relationship at early ages. ACI J 88(1):3–10
24. Klink SA (1986) Aggregates, elastic-modulus, and Poisson’s ratio of concrete. ACI J 83(6):961–965
25. Byfors J (1980) Plain concrete at early ages. Swedish Cement and Concrete Institute, Stockholm
26. Mesbah HA, Lachemi M, Aircin P (2002) Determination of elastic properties of high-performance concrete at early ages. ACI Mater J 99(1):37–41
27. ASTM C 215-08 (2008) Standard test method for fundamental transverse, longitudinal, and torsional frequencies of concrete specimens. ASTM International, West Conshohocken
28. Ahmed L, Ansell A (2012) Laboratory investigation of stress waves in young shotcrete on rock. Mag Concr Res 64(1):1–1010.1680/macr.2012.64.1.1 ↗
29. Hillerborg A, Modéer M, Peterson P-E (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6(6):773–78110.1016/0008-8846(76)90007-7 ↗
30. Petersson P-E (1981) Crack growth and development of fracture zones in plain concrete and similar materials. Report No. TVBM-1006, Lund University
31. Gustafsson P (1985) Fracture mechanics studies of non-yielding materials like concrete: modelling of tensile fracture and applied strength analysis. Report No. TVBM-1007, Lund University
32. Aure TW, Ioannides AM (2012) Numerical analysis of fracture process in pavement slabs. Can J Civ Eng 39:506–51410.1139/l2012-020 ↗
33. Hilsdorf HK, Brameshuber W (1991) Code-type formulation of fracture mechanics concepts for concrete. Int J Fract 51:61–7210.1007/BF00020853 ↗
34. Ahmed L (2012) Models for analysis of shotcrete on rock exposed to blasting. Licentiate Thesis, KTH University
35. Simulia, ABAQUS User’s examples and theory manual, Version 6.12
36. Malm R (2008) Predicting shear type crack initiation and growth in concrete with non-linear finite element method. Dissertation, KTH University
37. Mathworks (2013) Matlab. See http://www.mathworks.com/products/matlab/ . Accessed 06 May 2015