Determination of the mechanical properties of prestressed fiber-reinforced polymer concrete
Source abstract
Abstract
Abstract Polymer concrete is increasingly used in high-precision machine tools due to its excellent damping properties, thermal stability, and reduced environmental impact. However, its low tensile strength and stiffness limit its use in structural or dynamically loaded components. This study examines the mechanical enhancement of polymer concrete through the integration of prestressed continuous carbon fiber reinforcements. Specimens with embedded carbon fiber rovings prestressed up to 470 MPa were fabricated and tested under three-point bending and uniaxial compression loading. Bending strength increased by up to 35 % and bending stiffness by 16 %, with significant gains occurring beyond a prestress level of 70 – 110 MPa. CT imaging confirmed that prestressing delayed crack initiation and limited propagation. Under compressive loading parallel to the fiber direction, strength increased by up to 8 %, though the effect diminished at higher prestress levels. A reduction in compressive strength was observed for transverse loading, attributed to matrix discontinuities and stress redistribution. The results demonstrate that prestressed fiber integration significantly improves the structural performance of polymer concrete, offering enhanced load capacity and failure resistance. These findings lay the foundation for broader application of polymer concrete in load-bearing components and support the development of hybrid systems combining mechanical efficiency with design flexibility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural mechanics and materials · Advanced Energy Technologies and Civil Engineering Innovations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Kim HS, Park KY, Lee DG (1995) A study on the epoxy resin concrete for the ultra-precision machine tool bed. J Mater Process Technol 48(1):649–655. https://doi.org/10.1016/0924-0136(94)01705-6. (2nd Asia Pacific Conference on Materials Processing)10.1016/0924-0136(94)01705-6 ↗
2. Möhring H-C, Brecher C, Abele E, Fleischer J, Bleicher F (2015) Materials in machine tool structures. CIRP Ann 64:725–748. https://doi.org/10.1016/j.cirp.2015.05.00510.1016/j.cirp.2015.05.005 ↗
3. Werkle K.T, Engert M, Möhring H.-C (2023) Co2 footprint of machine elements made of fiber-reinforced polymer concrete compared to steel components. In: Kohl H, Seliger G, Dietrich F (eds) Manufacturing driving circular economy. Springer, Cham, pp 240–248. https://doi.org/10.1007/978-3-031-28839-5_2710.1007/978-3-031-28839-5_27 ↗
4. Jackisch U-V, Neumann M (2014) Maschinengestelle Für Hochdynamische Produktionstechnik, 1st edn. Die Bibliothek der Technik (BT). SZ Scala, Munich, Germany
5. Lacalle N, Mentxaka AL (eds.) (2008) Machine tools for high performance machining, 2009 edn., pp. 63–65. Springer, London, England
6. Saljé E, Gerloff H, Meyer J (1988) Comparison of machine tool elements made of polymer concrete and cast iron. CIRP Ann 37(1):381–384. https://doi.org/10.1016/S0007-8506(07)61659-X10.1016/S0007-8506(07)61659-X ↗
7. Diederichs U, Haroske G, Krüger W, Mertzsch O (2002) Tragelemente aus polymerbeton. Bautechnik 79(5):306–315. https://doi.org/10.1002/bate.20020210010.1002/bate.200202100 ↗
8. Lokuge W, Aravinthan T (2013) Mechanical properties of polymer concrete with different types of resin. Mater Sci Eng 2013(1):948745. https://doi.org/10.1201/b15320-20410.1201/b15320-204 ↗
9. Ciupan M, Ciupan E (2016) Comparison of machine-tool structures made of cast iron or mineral casting. In: 2016 international conference on production research - Africa, Europe and the Middle East 4th international conference on quality and innovation in engineering and management
10. Jackisch U-V (2002) Mineralguss Für Den Maschinenbau. Die Bibliothek der Technik. moderne industrie, Landsberg/Lech, Germany
11. Bedi R, Chandra R, Singh SP (2013) Mechanical properties of polymer concrete. J Compos 2013(1):948745. https://doi.org/10.1155/2013/94874510.1155/2013/948745 ↗
12. Bedi R, Chandra R, Singh SP (2014) Reviewing some properties of polymer concrete. Indian Concr J 88:47–68
13. Reis JML, Ferreira AJM (2003) Fracture behavior of glass fiber reinforced polymer concrete. Polym Test 22(2):149–153. https://doi.org/10.1016/S0142-9418(02)00063-610.1016/S0142-9418(02)00063-6 ↗
14. Reis JML, Ferreira AJM (2004) Assessment of fracture properties of epoxy polymer concrete reinforced with short carbon and glass fibers. Constr Build Mater 18(7):523–528. https://doi.org/10.1016/j.conbuildmat.2004.04.01010.1016/j.conbuildmat.2004.04.010 ↗
15. Vipulanandan C, Dharmarajan N, Ching E (1988) Mechanical behaviour of polymer concrete systems. Mater Struct 21(4):268–277. https://doi.org/10.1007/BF0248182510.1007/BF02481825 ↗
16. Reis JML (2005) Mechanical characterization of fiber reinforced polymer concrete. Mater Res 8(3):357–360. https://doi.org/10.1590/S1516-1439200500030002310.1590/S1516-14392005000300023 ↗
17. Jeon E-B, Ahn S, Lee I-G, Koh H-I, Park J, Kim H-S (2015) Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab. Compos Struct 134:27–35. https://doi.org/10.1016/j.compstruct.2015.08.08210.1016/j.compstruct.2015.08.082 ↗
18. Hassani Niaki M, Fereidoon A, Ghorbanzadeh Ahangari M (2018) Experimental study on the mechanical and thermal properties of basalt fiber and nanoclay reinforced polymer concrete. Compos Struct 191:231–238. https://doi.org/10.1016/j.compstruct.2018.02.06310.1016/j.compstruct.2018.02.063 ↗
19. Hassani Niaki M, Fereidoon A, Ghorbanzadeh Ahangari M (2018) Mechanical properties of epoxy/basalt polymer concrete: experimental and analytical study. Struct Concr 19(2):366–373. https://doi.org/10.1002/suco.20170000310.1002/suco.201700003 ↗
20. Mebarkia SA, Vipulanandan C (1992) Compressive behavior of glass-fiber-reinforced polymer concrete. J Mater Civil Eng 4:91–105. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(91)10.1061/(ASCE)0899-1561(1992)4:1(91) ↗
21. Farooq M, Banthia N (2022) Strain-hardening fiber reinforced polymer concrete with a low carbon footprint. Constr Build Mater 314:125705. https://doi.org/10.1016/j.conbuildmat.2021.12570510.1016/j.conbuildmat.2021.125705 ↗
22. Reis JML (2006) Fracture and flexural characterization of natural fiber-reinforced polymer concrete. Constr Build Mater 20(9):673–678. https://doi.org/10.1016/j.conbuildmat.2005.02.00810.1016/j.conbuildmat.2005.02.008 ↗
23. Martínez-Cruz E, martínez-barrera G, Martínez-López M (2013) Polymer concrete reinforced with recycled-tire fibers: Mechanical properties. Mater Sci Eng Conf Ser 45:2026. https://doi.org/10.1088/1757-899X/45/1/01202610.1088/1757-899X/45/1/012026 ↗
24. Barbuta M, Harja M (2008) Properties of fiber reinforced polymer concrete. Buletinul Institutului Politehnic din lasi. Sectia Constructii, Arhitectura 54(3):13
25. Tavares CML, Ribeiro MCS, Ferreira AJM, Guedes RM (2002) Creep behaviour of frp-reinforced polymer concrete. Compos Struct 57(1):47–51. https://doi.org/10.1016/S0263-8223(02)00061-210.1016/S0263-8223(02)00061-2 ↗
26. Fan X, Zhang M (2016) Experimental study on flexural behaviour of inorganic polymer concrete beams reinforced with basalt rebar. Compos Part B Eng 93:174–183. https://doi.org/10.1016/j.compositesb.2016.03.02110.1016/j.compositesb.2016.03.021 ↗
27. Wegner R, Engert M, Möhring H-C, Gresser GT (2023) Structural improvement of mineral cast through pre-stressed carbon fibre reinforcements for application in machine tool constructionstructural improvement of mineral cast through pre-stressed carbon fibre reinforcements for application in machine tool construction, pp. 151–157
28. Engert M, Werkle K, Wegner R, Möhring H.-C (2023) Mechanisms for the production of prestressed fiber-reinforced mineral cast. In: Liewald M, Verl A, Bauernhansl T, Möhring H.-C (eds) Production at the leading edge of technology. Springer, Cham, pp 52–60. https://doi.org/10.1007/978-3-031-18318-8_610.1007/978-3-031-18318-8_6 ↗
29. Engert M, Werkle K.T, Möhring H.-C (2023) Determination of the thermal properties of pre-stressed fiber-reinforced polymer concrete. In: Ihlenfeldt S (ed) 3rd International Conference on Thermal Issues in Machine Tools (ICTIMT2023). Springer, Cham, pp 278–285. https://doi.org/10.1007/978-3-031-34486-2_2010.1007/978-3-031-34486-2_20 ↗
30. Engert M, Werkle KT, Wegner R, Born L, Gresser GT, Möhring H-C (2023) Validation of the manufacturing methodology of prestressed fiber-reinforced polymer concrete by the variation of process parameters. Materials 16(23):7377. https://doi.org/10.3390/ma1623737710.3390/ma16237377 ↗
31. Krüger M (2004) Vorgespannter textilbewehrter beton. PhD thesis, Universität Stuttgart.
32. RAMPF Machine Systems GmbH & Co. KG: EPUMENT 130/3 A3 - Technisches Merkblatt. (2017). RAMPF Machine Systems GmbH & Co. KG
33. Shahawi M.E, Batchelor B.d (1986) Fatigue of partially prestressed concrete. J Struct Eng 112(3):524–537. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(524)10.1061/(ASCE)0733-9445(1986)112:3(524) ↗
34. Pang JWC, Fancey KS (2008) Analysis of the tensile behaviour of viscoelastically prestressed polymeric matrix composites. Compos Sci Technol 68(7):1903–1910. https://doi.org/10.1016/j.compscitech.2007.12.01810.1016/j.compscitech.2007.12.018 ↗
35. Mostafa NH, Ismarrubie ZN, Sapuan SM, Sultan MTH (2017) Fibre prestressed composites: theoretical and numerical modelling of unidirectional and plain-weave fibre reinforcement forms. Compos Struct 159:410–423. https://doi.org/10.1016/j.compstruct.2016.09.09010.1016/j.compstruct.2016.09.090 ↗
36. Gu X, Jin X, Zhou Y (2016) Prestressed concrete structures. Springer, Berlin, Heidelberg, pp 415–495. https://doi.org/10.1007/978-3-662-48565-1_1010.1007/978-3-662-48565-1_10 ↗
37. Wang B (2016) Viscoelastically prestressed composites: towards process optimisation and application to morphing structures. PhD thesis, University of Hull
38. Fancey KS (2016) Viscoelastically prestressed polymeric matrix composites: an overview. J Reinf Plast Compos 35(17):1290–1301. https://doi.org/10.1177/073168441664903610.1177/0731684416649036 ↗
39. Beyerlein IJ, Zhou CH, Schadler LS (2003) A time dependent micro-mechanical fiber composite model for inelastic zone growth in viscoelastic matrices. Int J Solids Struct 40(9):2171–2194. https://doi.org/10.1016/S0020-7683(03)00021-010.1016/S0020-7683(03)00021-0 ↗
40. Gilbert R, Mickleborough N, Ranzi G (2017) Design of prestressed concrete to eurocode 2. CRC Press, Boca Raton, USA10.1201/9781315389523 ↗
41. Cowan HJ (1953) The strength of plain, reinforced and prestressed concrete under the action of combined stresses, with particular reference to the combined bending and torsion of rectangular sections. Mag Concr Res 5(14):75–8610.1680/macr.1953.5.14.75 ↗
42. Shuraim A.B, Naaman A.E (2003) A new design methodology for the ultimate capacity of slender prestressed concrete columns. PCI J 48(1):64–80. https://doi.org/10.15554/pcij.01012003.64.8010.15554/pcij.01012003.64.80 ↗
43. Wang L, Kawaguchi K, Xu J, Han Q (2019) Effects of transverse constraints on the longitudinal compressive strength of unidirectional cfrp pultruded plates and rods. Compos Struct 207:740–751. https://doi.org/10.1016/j.compstruct.2018.09.07110.1016/j.compstruct.2018.09.071 ↗