journal article·2022-04

Vital role of lower frequencies in the rheological evaluation of SBS modified binders

Akanksha Pandey, Sk Sohel Islam, R. N. G. D. Ransinchung, Sham S. Ravindranath

Materials and Structures· Volume 55· Issue 3
Publisher page

Abstract

In this study, the critical role of lower angular frequencies (≤ 0.1 rad/s) in analyzing the rheological properties of SBS modified binders (SBS-MBs) have been demonstrated. Frequency sweep measurements were performed from 100 to 0.01 rad/s in the linear viscoelastic region at 60 °C. The results show that the rheological signature of the SBS polymer in the binder is primarily observed at lower frequencies (≤ 0.1 rad/s). The SBS molecules primarily respond at longer time scales of measurement due to their sluggish dynamics. Hence, the difference among SBS-MBs as a function of SBS content, SBS structure, additives, and short-term aging, increases as frequency decreases. Importantly, the correlation of rheological variables with rut depth improves significantly at frequencies ≤ 0.1 rad/s. On the other hand, at higher frequencies (≥ 10 rad/s), the brittle-like response from the polystyrene segments and the smaller units of the SBS molecule dominate the rheological signal. Therefore at frequencies ≥ 10 rad/s, the evidence of varying SBS content, SBS structure, additive, and short-term aging was inadequate. Thus, this study reveals that the upper service temperature rheological properties of SBS-MBs are better evaluated and quantified at lower frequencies (≤ 0.1 rad/s). For effective grading, quality control, and good correlation with rut depth, a rheological parameter at a frequency ≤ 0.1 rad/s is essential in polymer modified binders.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Yetkin Y (2007) Polymer modified asphalt binders. Const and Build Mater 21:66–726710.1016/j.conbuildmat.2005.07.007 ↗
2. Okan S, Hong JK, Mang T, Bouzid C (2008) Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testing. Cons Build Mater 22:286–29410.1016/j.conbuildmat.2006.08.018 ↗
3. Chen Z, Hainian W, Xu Y (2019) Low temperature performance of SBS-modified asphalt mixture in high altitude and cold regions. Inter J of Pave Rese Tech 12:33–4210.1007/s42947-019-0005-4 ↗
4. Lv Q, Huang W, Sadek H, Xiao F, Yan C (2019) Investigation of the rutting performance of various modified asphalt mixtures using the Hamburg wheel-tracking device test and multiple stress creep recovery test. Const Build Mater 206:62–7010.1016/j.conbuildmat.2019.02.015 ↗
5. Burak S, Giray I (2008) Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. J Hazard Mater 150:424–43210.1016/j.jhazmat.2007.04.122 ↗
6. Lin P (2019) Rheological, chemical, and aging characteristics of high content polymer modified asphalt. Const Build Mater 207:616–62910.1016/j.conbuildmat.2019.02.086 ↗
7. Schaur A, Unterberger S, Lackner R (2017) Impact of molecular structure of SBS on thermo-mechanical properties of polymer modified bitumen. Eur Polym J 96:256–26510.1016/j.eurpolymj.2017.09.017 ↗
8. Airey GD (2004) Styrene butadiene styrene polymer modification of road bitumens. J of Mater Scie 39(3):951–95910.1023/B:JMSC.0000012927.00747.83 ↗
9. Liyan S, Xiaofei Q, Xianglei D, Shuang LJC (2020) Effect of styrene-butadiene-styrene (SBS) on the rheological behavior of asphalt binders. Const Build Mater 231:11707610.1016/j.conbuildmat.2019.117076 ↗
10. Rossia CO, Assunta S, Bagdat T, Galiya I, Yerik A, Villiam B (2015) Polymer modified bitumen: rheological properties and structural characterization. Colloid Surf A: Phys Eng Aspec 480:390–39710.1016/j.colsurfa.2015.02.048 ↗
11. Abdulhaq HA (2017) Evaluation of rutting susceptibility of modified asphalt binder. J Eng Sust Dev 21 (04)
12. Tian X, Jianhui X, Ting H, Jiufan H, Yuxuan Z, Jianxin G, Youbing L (2016) Viscoelastic phase behavior in SBS modified bitumen studied by morphology evolution and viscoelasticity change. Const Build Mater 105:589–59410.1016/j.conbuildmat.2015.11.033 ↗
13. Airey GD (2003) Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel 82:1709–171910.1016/S0016-2361(03)00146-7 ↗
14. Mingyuan C, Jiuguang G, Caiyun X, Leilei H, Zhuo L (2021) A review of phase structure of SBS modified asphalt: affecting factors, analytical methods, phase models and improvements. Const Build Mater 294:12361010.1016/j.conbuildmat.2021.123610 ↗
15. Michele P, Paolino C, Valeria L, Shahin E, Bagdat T, Cesare OR (2019) Bitumen and bitumen modification: a review on latest advances. Appl Sci 9:74210.3390/app9040742 ↗
16. Chen JS, Liao MC, Tsai HH (2002) Evaluation and optimization of the engineering properties of polymer-modified asphalt. PFANF 3:75–83
17. Airey GD, Behzad R (2004) Combined bituminous binder and mixture linear rheological properties. Const Build Mater 18:535–54810.1016/j.conbuildmat.2004.04.008 ↗
18. Bulatovic VO, Rek V, Markovic KJ (2012) Polymer modified bitumen. Mater Res Innov 16:1–610.1179/1433075X11Y.0000000021 ↗
19. Chen JS, Huang CC (2007) Fundamental characterization of sbs-modified asphalt mixed with sulfur. J Appl Poly Sci 103:2817–282510.1002/app.24621 ↗
20. Alexandros M, Georgios P, Geert J, David H, Mats B, Jeroen B, Wim VDB (2021) Evaluating the role of recycling rate and rejuvenator on the chemo-rheological properties of reclaimed polymer-modified binders. Road mate pave desi 22:83-S9810.1080/14680629.2021.1905700 ↗
21. Alexandros M, Navid H, Georgios P, Geert J, Johan B, Wim VDB (2021) The impact of reclaimed asphalt rate on the healing potential of bituminous mortars and mixtures. Int J Pave Eng. pp 1–1110.1080/10298436.2021.1969020 ↗
22. Andreas S, Seraphin U, Roman L (2017) Impact of molecular structure of SBS on thermomechanical properties of polymer modified bitumen. Eur Poly J 96:256–26510.1016/j.eurpolymj.2017.09.017 ↗
23. Nivitha MR, Krishnan JM, Rajagopal KR (2020) Viscoelastic transitions exhibited by modified and unmodified bitumen. Intern J Pave Eng 6:766–78010.1080/10298436.2018.1508846 ↗
24. Tian X, Longmei Z, Jianhui X, Yaping Q, Wenqiang C, Jianfeng D (2018) Rheology and thermal stability of polymer modified bitumen with coexistence of amorphous phase and crystalline phase. Const Build Mater 178:272–27910.1016/j.conbuildmat.2018.05.073 ↗
25. Airey GD (2004) Fundamental binder and practical mixture evaluation of polymer modified bituminous materials. Int J Pave Eng 5(3):137–15110.1080/10298430412331314146 ↗
26. Airey GD, Grenfell JRA, Apeagyei A, Subhy A, Lo PD (2016) Time-dependent viscoelastic rheological response of pure, modified and synthetic bituminous binders. Mech Time Depen Mater. pp 1–2610.1007/s11043-016-9295-y ↗
27. Airey GD, Behzad R, Andrew CC (2004) Linear rheological behavior of Bituminous paving material. J Mater Civ Eng 16(3):212–22010.1061/(ASCE)0899-1561(2004)16:3(212) ↗
28. Vlachovicova Z, Stastna J, MacLeod D, Zanzotto L (2005) Shear deformation and material properties of polymer-modified asphalt. Petrole Coal 47:38–48
29. Yusoff NIM, Chailleux E, Airey GD (2011) A comparative study of the influence of shift factor equations on master curve construction. Int J Pavement Res Technol 4(6):324–336
30. Seyed MA, Nader T, Koorosh N, Manfred P (2013) An empirical model for modified bituminous binder master curves. Mater and Struct 46:1459–147110.1617/s11527-012-9988-x ↗
31. Ming L, Peng L, Weiyu F, Chengduo Q, Xue X, Jingtao S, Guozhi N (2015) Thermo-rheological behavior and compatibility ofmodified asphalt with various styrene–butadiene structures in SBS copolymers. Mater Desi 88:177–18510.1016/j.matdes.2015.09.002 ↗
32. Yvonne BM, Alejandro JM, Yajaira R (2003) Use of rheological compatibility criteria to study sbs modified asphalts. J Appl Poly Sci 90:1772–178210.1002/app.12764 ↗
33. Airey GD (2002) Use of black diagrams to identify inconsistencies in rheological data. Road Mater Pave Des 3(4):403–42410.1080/14680629.2002.9689933 ↗
34. Xinyao N, Tianjue H, Hongru Y, Zheng L, Xiaolong Z, Chenglie L (2019) Effect of C9 petroleum resins on improvement in compatibility and properties of SBS-modified asphalt. Petrol Sci Tech 37(14):1704–171210.1080/10916466.2019.1602642 ↗
35. Derya K, Ali T, Tony M (2019) Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen. Const Build Mater 221:345–35010.1016/j.conbuildmat.2019.06.081 ↗
36. Shisong R, Xueyan L, Weiyu F, Haopeng W, Sandra E (2019) Rheological properties, compatibility, and storage stability of sbs latex-modified asphalt. Mater 12:368310.3390/ma12223683 ↗
37. Guian W, Yong Z, Yinxi Z, Kang S, Yongzhong F (2002) Rheological characterization of storage-stable SBS-modified asphalts. Poly Test 21:295–30210.1016/S0142-9418(01)00086-1 ↗
38. Chen JS, Chih M, Lin CH (2003) Determination of polymer content in modified bitumen. Mater and Struc 3:594–59810.1007/BF02483278 ↗
39. Shenoy A (2004) High temperature performance grading of asphalts through a specification criterion that could capture field performance. J Transp Eng 130(1):132–13710.1061/(ASCE)0733-947X(2004)130:1(132) ↗
40. Shenoy A (2001) Refinement of the superpave specification parameter for performance grading of asphalt. J Transp Eng 127:357–36210.1061/(ASCE)0733-947X(2001)127:5(357) ↗
41. Radhakrishnan V, Ramya SM, Sudhakar RK (2018) Evaluation of asphalt binder rutting parameters. Const Build Mater 173:298–30710.1016/j.conbuildmat.2018.04.058 ↗
42. Mazurek G, Iwanski M (2016) Estimation of zero shear viscosity versus rutting resistance parameters of asphalt concrete. Proc Eng 161:30–3510.1016/j.proeng.2016.08.493 ↗
43. David JM, Christopher DJ, Jo SD (2016) Applying the Glover-Rowe parameter to evaluate low-temperature performance of hot mix asphalt LTPP sections. J Mater Civ Eng 28(10):0401609610.1061/(ASCE)MT.1943-5533.0001606 ↗
44. Yogesh K, Sumit KS, Deepa O, Praveen K, Paritosh M, Sham SR (2020) Effect of molecular structure and concentration of styrene-butadiene polymer on upper service temperature rheological properties of modified binders. Const Build Mater 249:11879010.1016/j.conbuildmat.2020.118790 ↗
45. Behnood A, Modiri MG (2019) Morphology, rheology, and physical properties of polymer-modified asphalt binders. Eur Polym J 112:766–79110.1016/j.eurpolymj.2018.10.049 ↗
46. Mturi GAJ, Mogonedi K, Marais H, Ntombela R (2017) A microstructural insight of modified bitumen through epi-fluorescence microscopy. South Afric Transp Conf. pp 280–295
47. Sumit KS, Yogesh K, Sham SR (2018) Thermal degradation of SBS in bitumen during storage: Influence of temperature, SBS concentration, polymer type and base bitumen. Poly Degrad Stab 147:64–7510.1016/j.polymdegradstab.2017.11.008 ↗
48. Yanheng H, Zhilong C, Zhaoyang L, Jiangting L, Jianying Y, Yangyang G (2021) Influence of heat and ultraviolet aging on the structure and properties of high dosage SBS modified bitumen for waterproof. Cons Build Mate 287:12298610.1016/j.conbuildmat.2021.122986 ↗
49. Feng Z, Jianying YJH (2011) Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts. Const Build Mater 25:129–13710.1016/j.conbuildmat.2010.06.048 ↗
50. Rieger J (1996) The glass transition temperature of polystyrene. J Therm Anal 46:965–97210.1007/BF01983614 ↗
51. Makhiyanov N, Temnikova EV (2010) Glass transition temperature and microstructure of polybutadienes. Polym Sci Ser A 52(12):1292–130010.1134/S0965545X10120072 ↗
52. Lin YH (2005) Motion associated with a single rouse segment versus the r relaxation. 2. J Phys Chem B 109:17670–1767810.1021/jp040567s ↗
53. Alexander B (2008) Segmental versus chain dynamics of linear polymers. J Chem Phys 128:10490110.1063/1.2835603 ↗
54. Antonio T, Brisa A, Cristina G, Yun L, Rolando C (2018) Structure, rheology, and microrheology of wormlike micelles made of PB–PEO diblock copolymers. Soft Matter 14:7264–727610.1039/C8SM01530A ↗
55. Stelios AS, Katerina P, Paraskevi P, Georgios S, Dimitris V (2020) Linear viscoelastic response of unentangled polystyrene bottlebrushes. Macromole 53:3923–393210.1021/acs.macromol.0c00266 ↗
56. Eric JB, Karen IW (2020) Dynamics of polymer segments, polymer chains, and nanoparticles in polymer nanocomposite melts: a review. Progr Poly Scie 105:10124210.1016/j.progpolymsci.2020.101242 ↗
57. Feng M, Chen L, Zhen F, Yue H, Jiasheng D, Qiao F (2021) Evaluation of high temperature rheological performance of polyphosphoric acid-SBS and polyphosphoric acid-crumb rubber modified asphalt. Const Build Mater 306:12492610.1016/j.conbuildmat.2021.124926 ↗
58. Ming L, Shisong R, Weiyu FXX (2016) Storage stability and its relationship with microstructure of SBS modified de-oiled asphalt. In: 4th International Conference on Mechanical Materials and Manufacturing Engineering (MMME 2016)
59. Baha V, Mehmet Y, Mustafa A (2014) Evaluation of the conventional and rheological properties of SBS + Sasobit modified binder. Const and Build Mate 63:174–17910.1016/j.conbuildmat.2014.04.015 ↗
60. Shahriar A, Zahid H (2017) Changes in fractional compositions of PPA and SBS modified asphalt binders. Const Build Mater 152:386–39310.1016/j.conbuildmat.2017.07.021 ↗
61. Hassan F, Amir AA, Fereidoon MN, Hamid B (2016) Rheological properties of bitumen modified with a combination of FT paraffin wax (sasobit) and other additives. J Civil Eng Manage 22(2):135–14510.3846/13923730.2014.897977 ↗
62. https://www.sasobit.com/files/downloads/en/sasobit/ProductInformation_en.pdf
63. Graham CH and Brian DP Evaluation of sasobit® for use in warm mix asphalt, National Center for Asphalt Technology, NCAT Report. pp 05–06
64. Edwards Y, Yuksel T, Isacsson U (2006) Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220—low temperature performance. Fuel 85:989–99710.1016/j.fuel.2005.09.014 ↗
65. Gang L, Erik N, Jozef K, Leegwater G, Martin VDV (2014) Rheological and chemical evaluation on the ageing properties of SBS polymer modified bitumen: from the laboratory to the field. Const Build Mater 51:244–24810.1016/j.conbuildmat.2013.10.043 ↗
66. Naipeng T, Weidong H, Gengren H (2021) Effect of aging on morphology, rheology, and chemical properties of highly polymer modified asphalt binders. Const Build Mater 281:12259510.1016/j.conbuildmat.2021.122595 ↗
67. Carlos R, Silvia C, Edith AM, Diana BS, Pravat K (2021) Comparative evaluation of ageing effects on the properties of regular and highly polymer modified asphalt binders. Const Build Mater 302:12416310.1016/j.conbuildmat.2021.124163 ↗
68. Jhony H, Ilker B, Elie YH, Nathan EM (2021) Influence of aging on rheology- and chemistry-based properties of high polymer-modified asphalt binders. Inter J Pave Eng. pp 1–19
69. Chuanqi Y, Weidong H, Peng L, Yuan Z, Quan L (2019) Chemical and rheological evaluation of aging properties of high content SBS polymer modified asphalt. Fuel 252:417–42610.1016/j.fuel.2019.04.022 ↗
70. Henglong Z, Zihao C, Guoqing X, Caijun S (2018) Evaluation of aging behaviors of asphalt binders through different rheological indices. Fuel 221:78–887910.1016/j.fuel.2018.02.087 ↗
71. Rafiqul AT, Seyed SY (2016) Rheological examination of aging in polymer-modified asphalt. J Mater Civ Eng 28(2):0401511210.1061/(ASCE)MT.1943-5533.0001370 ↗
72. John AD (2011) The relationship of the MSCR test to rutting. Road Mate Pave Desi 1:61–80
73. Tacettin G, Maksut S (2018) Performance properties of asphalt modified with reactive terpolymer. Constr Build Mater 173:262–27110.1016/j.conbuildmat.2018.04.036 ↗