Visual and machine grading of larch (Larix decidua Mill.) structural timber from the Italian Alps
Source abstract
Abstract
The present paper focuses on the main results of an inter-regional project (Bois-lab) aimed at determining the settings of various machines for grading larch (Larix decidua Mill.) timber from Italian and French Alps, that can now be graded for structural use and CE marked according to EN 14081-1. In particular it reports the differences registered between visual and machine grading on 261 larch beams. Visual grading was made according to the Italian national standard UNI 11035-1,2 while machine grading was performed using various devices. Finally the wooden material was subjected to laboratory testing according to EN 408. The results showed that machine grading yields are significantly higher, especially due to the reduced number of rejected elements. The paper also evaluates the flexibility and potential of the above methods taking into account different combinations of strength classes in terms of output.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · 3D Surveying and Cultural Heritage · Industrial Vision Systems and Defect Detection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Bacher M (2008) Comparison of different machine strength grading principles. In: COST E53 Conference 29th–30th October, Delft, pp 183–193
2. Brunetti M, Luchetti M, Nocetti M, Togni M (2011) Use of timber in building. New rules and new opportunities (in Italian). Sherwood 175:42–45
3. Brunetti M, Nocetti M, Bacher M, Berti S, Burato P (2015) Machine strength grading of Italian structural timber (in Italian). Sherwood 208:9–12
4. Callegari G, Zanuttini R (2010) Boislab. Il legno per un’architettura sostenibile. Alinea, Firenze
5. Chui YH, Turner R, Smith I (1991) Effect of sampling size on accuracy of characteristic values of machine grades. CIB-W18 paper 24-17-3, Oxford
6. DIN 4074-1 Ausgabe 2012, 06 (2012) Sortierung von Holz nach der Tragfähigkeit—Teil 1: Nadelschnittholz
7. EN 338 (2009) Structural timber—strength classes
8. EN 384 (2010) Structural timber—determination of characteristic values of mechanical properties and density
9. EN 408 (2012) Timber structures—structural timber and glued laminated timber—determination of some physical and mechanical properties
10. EN 1912 (2012) Structural timber—strength classes—assignment of visual grades and species
11. EN 13183-1:2002/AC:2003 (2003) Moisture content of a piece of sawn timber—part 1: determination by oven dry method
12. EN 14081-1:2005 + A1:2011 (2011) Timber structures—strength graded structural timber with rectangular cross section—part 1: general requirements
13. EN 14081-2:2010 (2010) Timber structures—strength graded structural timber with rectangular cross section—part 2: machine grading; additional requirements for initial type testing
14. Gambetta A, Susco D, Zanuttini R (2004) Determination of the natural durability of larch wood (Larix decidua Mill.) from the Western Italian Alps. Holzforshung 58(6):678–681. doi: 10.1515/HF.2004.12310.1515/HF.2004.123 ↗
15. Giudiceandrea F (2005) Stress grading lumber by a combination of vibration stress waves and Xray scanning. In: 11th International conference on scanning technology and process optimization in the wood industry, Las Vegas pp 99–108
16. Glos P (1985) Sampling of timber in structural sizes. CIB-W18 paper 18-17-1, Beit Oren, Israel
17. Hanhijärvi A, Ranta-Maunus A, Turk G (2005) Potential of strength grading of timber with combined measurement techniques. Report of the Combigrade—project—phase 1. VTT Publications 568
18. Hanhijärvi A, Ranta-Maunus A (2008) Development of strength grading of timber using combined measurement techniques. Report of the Combigrade-project—phase 2. VTT Publication 686
19. INFC (2005) Forests and Carbon Reservoirs National Inventory (in Italian). www.infc.it . Accessed 15 July 2015
20. Negro F, Cremonini C, Zanuttini R (2013) CE marking of structural timber: the European standardization framework and its effects on Italian manufacturers. Drv Ind 64(1):55–62. doi: 10.5552/drind.2013.121410.5552/drind.2013.1214 ↗
21. NF B 52-001 Août 2011 (2011) Règles d’utilisation du bois dans les constructions; Classement visuel pour employen structure pour les principales essences résineuses et feuillues
22. Nocetti M, Bacher M, Brunetti M, Crivellaro A, van de Kuilen JWG (2010) Machine grading of Italian structural timber: preliminary results on different wood species. In: Proceedings of the world conference on timber engineering, June 20th–24th, Riva del Garda
23. Nocetti M, Brancheriau L, Bacher M, Brunetti M, Crivellaro A (2013) Relationship between local and global modulus of elasticity in bending and its consequence on structural timber. Eur J Wood Wood Prod 7(3):297–308. doi: 10.1007/s00107-013-0682-710.1007/s00107-013-0682-7 ↗
24. Ranta-Maunus A, Denzler J (2009) Variability of strength of European spruce. CIB-W18 paper 42-6-1, Dübendorf
25. REGULATION (EU) (2011) No 305/2011 of 9 March 2011 laying down harmonized conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
26. Stapel P, van de Kuilen JWG, Strehl O (2012) Visual strength grading in Europe. CIB W18 45-5-2, Växjö
27. Stapel P, van de Kuilen JWG (2013) Effects of grading procedures on the scatter of characteristic values of European grown sawn timber. Mater Struct 46(9):1587–159810.1617/s11527-012-9999-7 ↗
28. UNI 11035-1:2010 (2010) Legno strutturale—Classificazione a vista dei legnami secondo la resistenza meccanica—Parte 1: Terminologia e misurazione delle caratteristiche
29. UNI 11035-2:2010 (2010) Legno strutturale—Classificazione a vista dei legnami secondo la resistenza meccanica—Parte 2: Regole per la classificazione a vista secondo la resistenza meccanica e valori caratteristici per tipi di legname strutturale