Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression
Source abstract
Abstract
This paper presents the investigation and modeling of plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression. Also the effect of the cross-section shape of specimens on these parameters is investigated. For this purpose, the experimental results of cyclic stress–strain behavior of circular, square and rectangular concrete prisms confined by FRP-composites are presented and examined. Besides, the effect of repeated complete cycles on the plastic strain and stress deterioration is studied. The results show that the relation between plastic strain and first unloading strain is linear and depends only on the two parameters of concrete strength and the shape of cross-section, but the stress deterioration depends only on the first unloading strain. The predictive formulations for plastic strain and stress deterioration are presented and compared with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Lam L, Teng JG (2004) Behavior and modeling of fiber reinforced polymer-confined concrete. J Struct Eng ASCE 130(11):1713–172310.1061/(ASCE)0733-9445(2004)130:11(1713) ↗
2. Mirmiran A, Shahawy M (1997) Behavior of concrete columns confined by fiber composites. J Struct Eng ASCE 123(5):583–59010.1061/(ASCE)0733-9445(1997)123:5(583) ↗
3. Xiao Y, Wu H (2000) Compressive behavior of concrete confined by carbon fiber composite jackets. J Mater Civil Eng ASCE 12(2):139–14610.1061/(ASCE)0899-1561(2000)12:2(139) ↗
4. Lam L, Teng JG (2003) Design-oriented stress–strain model for FRP-confined concrete. Constr Build Mater 17(6–7):471–48910.1016/S0950-0618(03)00045-X ↗
5. Samaan M, Mirmiran A, Shahawy M (1998) Model of concrete confined by fiber composite. J Struct Eng ASCE 124(9):1025–103110.1061/(ASCE)0733-9445(1998)124:9(1025) ↗
6. Spoelstra MR, Monti G (1999) FRP-confined concrete model. J Compos Constr ASCE 3(3):143–15010.1061/(ASCE)1090-0268(1999)3:3(143) ↗
7. Mirmiran A, Shahawy M (1997) Dilation characteristics of confined concrete. Int J Mech Cohesive-Frict Mater 2(3):237–24910.1002/(SICI)1099-1484(199707)2:3<237::AID-CFM32>3.0.CO;2-2 ↗
8. Mirmiran A, Shahawy M, Samaan M, El Echary H (1998) Effect of column parameters on FRP-confined concrete. J Compos Constr ASCE 2(4):175–18510.1061/(ASCE)1090-0268(1998)2:4(175) ↗
9. Al-Salloum YA (2007) Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates. Compos Part B Eng 38:640–65010.1016/j.compositesb.2006.06.019 ↗
10. Wang LM, Wu YF (2008) Effect of corner radius on the performance of CFRP-confined square concrete columns. Eng Struct 30:493–50510.1016/j.engstruct.2007.04.016 ↗
11. Rochette P, Labossière P (2000) Axial testing of rectangular column models confined with composites. J Compos Constr ASCE 4(3):129–13610.1061/(ASCE)1090-0268(2000)4:3(129) ↗
12. Wu G, Wu ZS, Lu ZT (2007) Design-oriented stress–strain model for concrete prisms confined with FRP composites. Constr Build Mater 21:1107–112110.1016/j.conbuildmat.2005.12.014 ↗
13. Wu YF, Wei YY (2010) Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns. Eng Struct 32:32–4510.1016/j.engstruct.2009.08.012 ↗
14. Wei YY, Wu YF (2012) Unified stress–strain model of concrete for FRP-confined columns. Constr Build Mater 26:381–39210.1016/j.conbuildmat.2011.06.037 ↗
15. Abbasnia R, Ziaadiny H (2015) Experimental investigation and strength modeling of CFRP-confined concrete rectangular prisms under axial monotonic compression. Mater Struct. doi: 10.1617/s11527-013-0198-y
16. Ozbakkaloglu T, Lim JC (2013) Axial compressive behavior of FRP-confined concrete: experimental test database and a new design-oriented model. Compos Part B 55:607–63410.1016/j.compositesb.2013.07.025 ↗
17. Vincent T, Ozbakkaloglu T (2013) Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete. Constr Build Mater 47:814–82610.1016/j.conbuildmat.2013.05.085 ↗
18. Rousakis TC, Rakitzis TD, Karabinis AI (2012) Design-oriented strength model for FRP confined concrete members. ASCE Compos Constr 16(6):615–62510.1061/(ASCE)CC.1943-5614.0000295 ↗
19. Ozbakkaloglu T, Lim JC, Vincent T (2013) FRP-confined concrete in circular sections: review and assessment of stress-strain models. Eng Struct 49:1068–108810.1016/j.engstruct.2012.06.010 ↗
20. Nisticò N, Pallini F, Rousakis T, Wu YF, Karabinis A (2014) Peak strength and ultimate strain prediction for FRP confined square and circular concrete sections. Compos Part B 67:543–55410.1016/j.compositesb.2014.07.026 ↗
21. Ilki A, Peker O, Karamuk E, Demir C, Kumbasar N (2008) FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns. J Mater Civ Eng 20(2):169–188. doi: 10.1061/(ASCE)0899-156110.1061/(ASCE)0899-1561(2008)20:2(169) ↗
22. Jiang J-F, Wu Y-F (2012) Identification of material parameters for Drucker-Prager plasticity model for FRP confined circular concrete columns. Int J Solids Struct 49(3–4):445–45610.1016/j.ijsolstr.2011.10.002 ↗
23. Yu T, Teng JG, Wong YL, Dong SL (2010) Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model. Eng Struct 32(3):665–67910.1016/j.engstruct.2009.11.014 ↗
24. Rousakis TC, Karabinis AI, Kiousis PD, Tepfers R (2008) Analytical modelling of plastic behavior of uniformly FRP confined concrete members. J Compos Part B 39(7–8):1104–111310.1016/j.compositesb.2008.05.001 ↗
25. Yu T, Teng JG, Wong YL, Dong SL (2010) Finite element modeling of confined concrete-II: plastic-damage model. Eng Struct 32(3):680–69110.1016/j.engstruct.2009.11.013 ↗
26. Shao Y, Zhu Z, Mirmiran A (2006) Cyclic modeling of FRP-confined concrete with improved ductility. Cem Concr Compos 28:959–96810.1016/j.cemconcomp.2006.07.009 ↗
27. Valdmanis V, De Lorenzis L, Rousakis T, Tepfers R (2007) Behavior and capacity of CFRP-confined concrete cylinders subjected to monotonic and cyclic axial compressive load. Struct Concr 8(4):18710.1680/stco.2007.8.4.187 ↗
28. Lam L, Teng JG (2009) Stress–strain model for FRP-confined concrete under cyclic axial compression. Eng Struct 31:308–32110.1016/j.engstruct.2008.08.014 ↗
29. Abbasnia R, Ziaadiny H (2010) Behavior of concrete prisms confined with FRP composites under axial cyclic compression. Eng Struct 32:648–65510.1016/j.engstruct.2009.11.011 ↗
30. Abbasnia R, Ahmadi R, Ziaadiny H (2012) Effect of confinement level, aspect ratio and concrete strength on the cyclic stress–strain behavior of FRP-confined concrete prisms. Compos Part B 43(2):825–83110.1016/j.compositesb.2011.11.008 ↗
31. Abbasnia R, Hosseinpour F, Rostamian M, Ziaadiny H (2012) Effect of corner radius on stress–strain behavior of FRP confined prisms under axial cyclic compression. Eng Struct 40:529–53510.1016/j.engstruct.2012.03.020 ↗
32. Abbasnia R, Hosseinpour F, Rostamian M, Ziaadiny H (2013) Cyclic and monotonic behavior of FRP confined concrete rectangular prisms with different aspect ratios. Constr Build Mater 40:118–12510.1016/j.conbuildmat.2012.10.008 ↗
33. Wang Z, Wang D, Scott T, Smith T, Lu D (2012a) CFRP confined square columns. I: experimental investigation. J Compos Constr 16:150. doi: 10.1061/(ASCE)CC.1943-5614.000024510.1061/(ASCE)CC.1943-5614.0000245 ↗
34. Wang Z, Wang D, Scott T, Smith T, Lu D (2012b) CFRP-confined square columns. II: cyclic axial compression stress-strain model. J Compos Constr 16:161–170. doi: 10.1061/(ASCE)CC.1943-5614.000024610.1061/(ASCE)CC.1943-5614.0000246 ↗
35. Rousakis TC, Karabinis AI (2012) Adequately FRP confined reinforced concrete columns under axial compressive monotonic or cyclic loading. RILEM Mater Struct 45(7):957–97510.1617/s11527-011-9810-1 ↗
36. Sakai J, Kawashima K (2006) Unloading and reloading stress–strain model for confined concrete. J Struct Eng ASCE 132(1):112–12210.1061/(ASCE)0733-9445(2006)132:1(112) ↗
37. Karsan ID, Jirsa JO (1969) Behavior of concrete under compressive loadings. J Struct Eng Div ASCE 95(ST12):2543–256310.1061/JSDEAG.0002424 ↗
38. Sinha BP, Gerstle KH, Tulin LG (1964) Stress–strain relations for concrete under cyclic loading. ACI J 61(2):195–211
39. ASTM D3039/D3039M–95 (1995) Standard test method for tensile properties of polymer matrix composite materials. Annual Book of ASTM Standards 1995, vol 14.02, American Society for Testing and Materials, West Conshohocken