journal article·2012-01

Characterization of mixed mode crack opening in concrete

J. S. Jacobsen, P. N. Poulsen, J. F. Olesen

Materials and Structures· Volume 45· Issue 1-2
Publisher page

Abstract

In real concrete structures cracks often open in mixed mode after their initiation. To capture the direct material behavior of a mixed mode crack opening a stiff biaxial testing machine, capable of imposing both normal and shear loads on a given crack area, has been applied. The opening and sliding components of the mixed mode displacement are measured using a custom made orthogonal gauge, and the measurements are used directly as the closed loop control signals. A double notch, concrete specimen is used for the crack investigation. The tests are divided into two steps, a pure Mode I opening step, where a macro crack is initiated in the specimen followed by the mixed mode opening step. The high stiffness of the set-up together with the closed control loop ensures a stable crack initiation followed by a controllable mixed mode opening. The deep notches result in a plane crack, only influenced by material aspects such as the aggregate size and concrete strength. Despite the occurrence of a few, local, secondary cracks during the mixed mode crack opening, the results can be treated as the mixed mode material point behavior of a crack in concrete. Results are reported for a range of mixed mode angles and for varying initial Mode I openings of the crack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Carol I, Prat PC, López CM (1997) Normal/shear cracking model: application to discrete crack analysis. J Eng Mech 123(8):765–77310.1061/(ASCE)0733-9399(1997)123:8(765) ↗
2. Carpinteri A, Brighenti R (2010) Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading. Mater Des 31(4):2032–2042 Design of nanomaterials and nanostructures10.1016/j.matdes.2009.10.021 ↗
3. Gettu R, Mobasher B, Carmona S, Jansen DC (1996) Testing of concrete under closed-loop control. Adv Cem Based Mater 3(2):54–7110.1016/1065-7355(95)00058-5 ↗
4. GOM (2005) Aramis user manual (4M) v5.4.1. GOM mbH, Germany
5. Hassanzadeh M (1992) Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements. Report TVBM-1010. PhD thesis, Lund Institute of Technology
6. Hillerborg A (1989) Stability problems in fracture mechanics testing. In Shah SP et al (eds) Fracture of concrete and rock—recent developments. Elsevier, London, pp 369–378
7. Hillerborg A, Modéer M, Petersson P-E (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6(6):773–78110.1016/0008-8846(76)90007-7 ↗
8. Madsen A (2009) Cracks in concrete under repetitive load; experiments and modeling. Master’s thesis, Department of Civil Engineering, Technical University of Denmark
9. Nielsen LO, Mougaard JF, Jacobsen JS, Poulsen PN (2010) A mixed mode model for fracture in concrete. In: Oh BH et al (ed) Fracture mechanics of concrete and concrete structures—recent advances in fracture mechanics of concrete. Korea Concrete Institute, Seoul
10. Nooru-Muhamed MB (1992) Mixed mode fracture of concrete: an experimental approach. PhD thesis, Delft University
11. Petersen RB (2008) Fracture mechanical analysis of reinforced concrete. Master’s thesis, Department of Civil Engineering. Technical University of Denmark, Project no. 07-062
12. Reinhardt HW, Ozbolt J, Xu S, Dinku A (1997) Shear of structural concrete members and pure Mode II testing. Adv Cem Based Mater 5(3–4):75–8510.1016/S1065-7355(96)00003-X ↗
13. Reinhardt HW, Xu S (2000) A practical testing approach to determine Mode II fracture energy G IIf for concrete. Int J Fract 105(2):107–12510.1023/A:1007649004465 ↗
14. Østergaard L, Olesen JF, Poulsen PN (2007) Biaxial testing machine for mixed mode cracking of concrete. In: Fracture mechanics of concrete and concrete structures: new trends in fracture mechanics of concretes
15. THK (2008) THK General catalog, catalog no. 400-1e edition
16. Walter R, Olesen JF (2008) Cohesive mixed mode fracture modelling and experiments. Eng Fract Mech 75(18):5163–517610.1016/j.engfracmech.2008.08.009 ↗