Influence of calcium nitrate and sodium nitrate on strength development and properties in quicklime(CaO)-activated Class F fly ash system
Source abstract
Abstract
The single use of CaO has been regarded as relatively unsuccessful in fly ash activation when no other additives are used together, as it produces a considerably lower strength compared to other types of activators (e.g., alkaline activators). This study investigated two potential additives of nitrate compounds (i.e., Ca(NO3)2 and NaNO3) to improve the strength of a CaO-activated fly ash system. The results showed that the use of Ca(NO3)2 was greatly beneficial in the strength improvement of the binder system primarily due to the significant increase in (1) the dissolution degree of fly ash, (2) C–S–H formation, and (3) pore size refinement from early days; however, NaNO3 was much less advantageous in strength improvement, although it also aided in dissolving fly ash.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Snellings R (2016) Assessing, understanding and unlocking supplementary cementitious materials. RILEM Tech Lett 1:50–55. https://doi.org/10.21809/rilemtechlett.2016.1210.21809/rilemtechlett.2016.12 ↗
2. Bukhari SS, Behin J, Kazemian H, Rohani S (2015) Conversion of coal fly ash to zeolite utilizing microwave and ultrasound energies: a review. Fuel 140:250–266. https://doi.org/10.1016/j.fuel.2014.09.07710.1016/j.fuel.2014.09.077 ↗
3. Provis JL (2014) Geopolymers and other alkali activated materials: why, how, and what? Mater Struct 47(1):11–25. https://doi.org/10.1617/s11527-013-0211-510.1617/s11527-013-0211-5 ↗
4. Bakharev T (2005) Geopolymeric materials prepared using Class F fly ash and elevated temperature curing. Cem Concr Res 35(6):1224–1232. https://doi.org/10.1016/j.cemconres.2004.06.03110.1016/j.cemconres.2004.06.031 ↗
5. Palomo A, Grutzeck MW, Blanco MT (1999) Alkali-activated fly ashes. Cem Concr Res 29(8):1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-910.1016/S0008-8846(98)00243-9 ↗
6. Shi C, Day RL (2000) Pozzolanic reaction in the presence of chemical activators: Part I. Reaction kinetics. Cem Concr Res 30(1):51–58. https://doi.org/10.1016/S0008-8846(99)00205-710.1016/S0008-8846(99)00205-7 ↗
7. Shi C, Day RL (2000) Pozzolanic reaction in the presence of chemical activators: Part II. Reaction products and mechanism. Cem Concr Res 30(4):607–613. https://doi.org/10.1016/S0008-8846(00)00214-310.1016/S0008-8846(00)00214-3 ↗
8. Jeon D, Jun Y, Jeong Y, Oh JE (2015) Microstructural and strength improvements through the use of Na2CO3 in a cementless Ca(OH)2-activated Class F fly ash system. Cem Concr Res 67:215–225. https://doi.org/10.1016/j.cemconres.2014.10.00110.1016/j.cemconres.2014.10.001 ↗
9. Li D, Chen Y, Shen J, Su J, Wu X (2000) The influence of alkalinity on activation and microstructure of fly ash. Cem Concr Res 30(6):881–886. https://doi.org/10.1016/S0008-8846(00)00252-010.1016/S0008-8846(00)00252-0 ↗
10. Giergiczny Z (2004) Effect of some additives on the reactions in fly ash-Ca(OH)2 system. J Therm Anal Calorim 76(3):747–754. https://doi.org/10.1023/B:JTAN.0000032259.80031.b210.1023/B:JTAN.0000032259.80031.b2 ↗
11. Fan Y, Yin S, Wen Z, Zhong J (1999) Activation of fly ash and its effects on cement properties. Cem Concr Res 29(4):467–472. https://doi.org/10.1016/S0008-8846(98)00178-110.1016/S0008-8846(98)00178-1 ↗
12. Shi C, Day RL (1995) Acceleration of the reactivity of fly ash by chemical activation. Cem Concr Res 25(1):15–21. https://doi.org/10.1016/0008-8846(94)00107-A10.1016/0008-8846(94)00107-A ↗
13. Pradhan B (2014) Corrosion behavior of steel reinforcement in concrete exposed to composite chloride–sulfate environment. Constr Build Mater 72:398–410. https://doi.org/10.1016/j.conbuildmat.2014.09.02610.1016/j.conbuildmat.2014.09.026 ↗
14. Aggoun S, Cheikh-Zouaoui M, Chikh N, Duval R (2008) Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages. Constr Build Mater 22(2):106–110. https://doi.org/10.1016/j.conbuildmat.2006.05.04310.1016/j.conbuildmat.2006.05.043 ↗
15. Chikh N, Cheikh-Zouaoui M, Aggoun S, Duval R (2008) Effects of calcium nitrate and triisopropanolamine on the setting and strength evolution of Portland cement pastes. Mater Struct 41(1):31–36. https://doi.org/10.1617/s11527-006-9215-810.1617/s11527-006-9215-8 ↗
16. Berke NS, Hicks MC (2004) Predicting long-term durability of steel reinforced concrete with calcium nitrite corrosion inhibitor. Cem Concr Compos 26(3):191–198. https://doi.org/10.1016/S0958-9465(03)00038-610.1016/S0958-9465(03)00038-6 ↗
17. Ann KY, Jung HS, Kim HS, Kim SS, Moon HY (2006) Effect of calcium nitrite-based corrosion inhibitor in preventing corrosion of embedded steel in concrete. Cem Concr Res 36(3):530–535. https://doi.org/10.1016/j.cemconres.2005.09.00310.1016/j.cemconres.2005.09.003 ↗
18. Çullu M, Arslan M (2014) The effects of chemical attacks on physical and mechanical properties of concrete produced under cold weather conditions. Constr Build Mater 57:53–60. https://doi.org/10.1016/j.conbuildmat.2014.01.07210.1016/j.conbuildmat.2014.01.072 ↗
19. Karagol F, Demirboga R, Khushefati WH (2015) Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions. Constr Build Mater 76:388–395. https://doi.org/10.1016/j.conbuildmat.2014.12.01110.1016/j.conbuildmat.2014.12.011 ↗
20. Asaga K, Tsuchiya Y, Shimada N, Torii H (2006) Reaction between NO3 − ion and 3CaO·Al2O3 in Aqueous Solutions with or without SO4 2− and Cl− ions. AIP Conf Proc 833(1):190–195. https://doi.org/10.1063/1.220710310.1063/1.2207103 ↗
21. Balonis M, Mędala M, Glasser FP (2011) Influence of calcium nitrate and nitrite on the constitution of AFm and AFt cement hydrates. Adv Cem Res 23(3):129–143. https://doi.org/10.1680/adcr.10.0000210.1680/adcr.10.00002 ↗
22. Dumm JQ, Brown PW (1996) Phase assemblages in the system Ca(OH)2—Al2O3—Ca(NO3)2—H2O. Adv Cem Res 8(32):143–153. https://doi.org/10.1680/adcr.1996.8.32.14310.1680/adcr.1996.8.32.143 ↗
23. Renaudin G, Rapin JP, Humbert B, François M (2000) Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2•4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2•2H2O. Cem Concr Res 30(2):307–314. https://doi.org/10.1016/S0008-8846(99)00251-310.1016/S0008-8846(99)00251-3 ↗
24. Taylor HF (1997) Cement chemistry. Thomas Telford, London10.1680/cc.25929 ↗
25. Hill R, Daugherty K (1996) The interaction of calcium nitrate and a Class C fly ash during hydration. Cem Concr Res 26(7):1131–1143. https://doi.org/10.1016/0008-8846(96)00074-910.1016/0008-8846(96)00074-9 ↗
26. ASTM (2015) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. American Society for Testing and Materials, West Conshohocken
27. Suh J-I, Jeon D, Yoon S, Oh JE, Park H-G (2017) Development of strong lightweight cementitious matrix for lightweight concrete simply by increasing a water-to-binder ratio in Ca(OH)2–Na2CO3-activated fly ash system. Constr Build Mater 152(Supplement C):444–455. https://doi.org/10.1016/j.conbuildmat.2017.07.01110.1016/j.conbuildmat.2017.07.011 ↗
28. Oh JE, Jun Y, Jeong Y (2014) Characterization of geopolymers from compositionally and physically different Class F fly ashes. Cem Concr Compos 50:16–26. https://doi.org/10.1016/j.cemconcomp.2013.10.01910.1016/j.cemconcomp.2013.10.019 ↗
29. PANalytical BV (2012) X’Pert HighScore Plus software. version 3.0e edn., Almelo, Netherlands
30. ICDD (2000) PDF-2 Database. PA, USA
31. Shi C (1993) Activation of natural pozzolans, fly ashes and blast furnace slag. The University of Calgary, Ottawa
32. ASTM (2015) Standard test method for flow of hydraulic cement mortar. American Society for Testing and Materials, West Conshohocken
33. ASTM (2014) Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. American Society for Testing and Materials, West Conshohocken
34. Zhang J, Scherer GW (2011) Comparison of methods for arresting hydration of cement. Cem Concr Res 41(10):1024–1036. https://doi.org/10.1016/j.cemconres.2011.06.00310.1016/j.cemconres.2011.06.003 ↗
35. Song S, Jennings HM (1999) Pore solution chemistry of alkali-activated ground granulated blast-furnace slag. Cem Concr Res 29(2):159–170. https://doi.org/10.1016/S0008-8846(98)00212-910.1016/S0008-8846(98)00212-9 ↗
36. Caruso F, Mantellato S, Palacios M, Flatt RJ (2017) ICP-OES method for the characterization of cement pore solutions and their modification by polycarboxylate-based superplasticizers. Cem Concr Res 91:52–60. https://doi.org/10.1016/j.cemconres.2016.10.00710.1016/j.cemconres.2016.10.007 ↗
37. Allmann R, Hinek R (2007) The introduction of structure types into the Inorganic Crystal Structure Database ICSD. Acta Crystallogr Sect A: Found Crystallogr 63(5):412–417. https://doi.org/10.1107/S010876730703808110.1107/S0108767307038081 ↗
38. Feldman RF, Beaudoin JJ (1991) Pretreatment of hardened hydrated cement pastes for mercury intrusion measurements. Cem Concr Res 21(2):297–308. https://doi.org/10.1016/0008-8846(91)90011-610.1016/0008-8846(91)90011-6 ↗
39. Aligizaki KK (2006) Pore structure of cement-based materials: testing, interpretation and requrements. Taylor & Francis, London
40. O’Neil MJ (2013) The Merck index: an encyclopedia of chemicals, drugs, and biologicals. Merck and Co., Inc, RSC Publishing, Whitehouse Station, NJ
41. Rumble J (2017) CRC handbook of chemistry and physics, 98th edn. Taylor & Francis, Boca Raton
42. Biernacki JJ, Williams PJ, Paul ES (2001) Kinetics of reaction of calcium hydroxide and fly ash. ACI Mater J. https://doi.org/10.14359/1040310.14359/10403 ↗
43. Shi C (1998) Pozzolanic reaction and microstructure of chemical activated lime-fly ash pastes. ACI Mater J 95(5):1. https://doi.org/10.14359/39610.14359/396 ↗
44. Mehta PK, Monteiro PJM (2006) Concrete: microstructure, properties, and materials. McGraw-Hill Publishing, New York
45. Bakolas A, Aggelakopoulou E, Moropoulou A, Anagnostopoulou S (2006) Evaluation of pozzolanic activity and physicomechanical characteristics in metakaolin-lime pastes. J Therm Anal Calorim 84(1):157–163. https://doi.org/10.1007/s10973-005-7262-y10.1007/s10973-005-7262-y ↗
46. Wang S-D, Scrivener KL (1995) Hydration products of alkali activated slag cement. Cem Concr Res 25(3):561–571. https://doi.org/10.1016/0008-8846(95)00045-E10.1016/0008-8846(95)00045-E ↗
47. Collier NC, Sharp JH, Milestone NB, Hill J, Godfrey IH (2008) The influence of water removal techniques on the composition and microstructure of hardened cement pastes. Cem Concr Res 38(6):737–744. https://doi.org/10.1016/j.cemconres.2008.02.01210.1016/j.cemconres.2008.02.012 ↗
48. Frías Rojas M (2006) Study of hydrated phases present in a MK–lime system cured at 60 C and 60 months of reaction. Cem Concr Res 36(5):827–831. https://doi.org/10.1016/j.cemconres.2006.01.00110.1016/j.cemconres.2006.01.001 ↗
49. Baquerizo Ibarra LG (2015) Impact of water activity on the mineralogy of hydrated cement. École polytechnique fédérale de Lausanne, Swiss
50. Lothenbach B, Le Saout G, Gallucci E, Scrivener K (2008) Influence of limestone on the hydration of Portland cements. Cem Concr Res 38(6):848–860. https://doi.org/10.1016/j.cemconres.2008.01.00210.1016/j.cemconres.2008.01.002 ↗
51. Schüth F, Sing KSW, Weitkamp J (2002) Handbook of porous solids. Wiley-Vch, Weinheim. https://doi.org/10.1002/978352761828610.1002/9783527618286 ↗
52. Richardson I, Girão A, Taylor R, Jia S (2016) Hydration of water-and alkali-activated white Portland cement pastes and blends with low-calcium pulverized fuel ash. Cem Concr Res 83:1–18. https://doi.org/10.1016/j.cemconres.2016.01.00810.1016/j.cemconres.2016.01.008 ↗
53. Brus J, Abbrent S, Kobera L, Urbanova M, Cuba P (2016) Advances in 27Al MAS NMR Studies of Geopolymers. Annu Rep NMR Spectrosc 88:79–147. https://doi.org/10.1016/bs.arnmr.2015.11.00110.1016/bs.arnmr.2015.11.001 ↗
54. Andersen MD, Jakobsen HJ, Skibsted J (2006) A new aluminium-hydrate species in hydrated Portland cements characterized by 27Al and 29Si MAS NMR spectroscopy. Cem Concr Res 36(1):3–17. https://doi.org/10.1016/j.cemconres.2005.04.01010.1016/j.cemconres.2005.04.010 ↗
55. Skibsted J, Henderson E, Jakobsen HJ (1993) Characterization of calcium aluminate phases in cements by aluminum-27MAS NMR spectroscopy. Inorg Chem 32(6):1013–1027. https://doi.org/10.1021/ic00058a04310.1021/ic00058a043 ↗
56. Yum WS, Jeong Y, Yoon S, Jeon D, Jun Y, Oh JE (2017) Effects of CaCl2 on hydration and properties of lime(CaO)-activated slag/fly ash binder. Cem Concr Compos 84(Supplement C):111–123. https://doi.org/10.1016/j.cemconcomp.2017.09.00110.1016/j.cemconcomp.2017.09.001 ↗
57. Jeong Y, Park H, Jun Y, Jeong JH, Oh JE (2016) Influence of slag characteristics on strength development and reaction products in a CaO-activated slag system. Cem Concr Compos 72:155–167. https://doi.org/10.1016/j.cemconcomp.2016.06.00510.1016/j.cemconcomp.2016.06.005 ↗