journal article·2017-04

Mechanical properties of steel corrosion products in reinforced concrete

Gang Xu, Li Liu, Hao Bao, Qing Wang, Juan Zhao

Materials and Structures· Volume 50· Issue 2
Publisher page

Abstract

The compressive modulus versus applied compressive stress for steel rebar corrosion products of varying composition and particle size is evaluated by consolidation tests with applied axial pressures of 0–30 MPa. The compressive modulus increases linearly with increasing applied stress, and the corrosion products are increasingly compressed with decreasing particle size under equivalent conditions. The effect of composition on the mechanical properties of corrosion products is not obvious under equivalent conditions. The elastic modulus of the corrosion products was observed to increase more or less linearly with increasing concrete cover thickness for a given concrete grade and steel rebar diameter, and the Poisson’s ratio was observed to decrease more or less linearly under the same condition. Based on elasticity theory, for common concrete grades (C20, C30, C40, C50) and standard values of concrete cover thickness (20–50 mm) and steel rebar diameter (10, 20, 30, 40 mm), the elastic modulus at the initiation of concrete cover cracking due to corrosion expansion is 2.5–30.8 MPa and the Poisson’s ratio is 0.46–0.49.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Lundgren K (2005) Bond between ribbed bars and concrete, Part 2: The effect of corrosion [J]. Mag Concr Res 57(7):383–39510.1680/macr.2005.57.7.383 ↗
2. Caré S, Nguyen QT, L’Hostis V, Berthaud Y (2008) Mechanical properties of the rust layer induced by impressed current method in reinforced mortar [J]. Cem Concr Res 38:1079–109110.1016/j.cemconres.2008.03.016 ↗
3. Pease BJ, Michel A, Thybo AEA, Stang H (2012) Estimation of elastic modulus of reinforcement corrosion products using inverse analysis of digital image correlation measurements for input in corrosion-induced cracking model [J]. In: International Conference on Bridge Maintenance, Safety and Management (IAMBAS), Lake Como, Italy10.1201/b12352-545 ↗
4. Suda K, Misra S, Motohashi K (1993) Corrosion products of reinforcing bars embedded in concrete [J]. Corros Sci 35(5–8):1543–154910.1016/0010-938X(93)90382-Q ↗
5. Peter-Lazar I, Gérard B (2000) Mechanical behavior of erosion products formed at the steel-concrete interface, testing and modeling, In: Proceedings EM2000, Fourteenth engineering mechanics conference, ASCE, Austin, Texas, USA
6. Zhao YX, Ren HY (2010) Mechanical properties of rust based on consolidation test and contact theory analysis [J]. J Chin Soc Corros Prot 03:58–60 (in Chinese)
7. Zhao YX, Dai H, Ren HY, Jin WL (2012) Experimental study of the modulus of steel corrosion in a concrete port [J]. Corros Sci 56:17–2510.1016/j.corsci.2011.11.004 ↗
8. Xu G, Bao H, Wang Q, Xu HM (2014) Study on the modulus of steel corrosion in a concrete port. Hydro-Sci Eng 5:22–28 (in Chinese)
9. Ouglova A, Berthaud Y, Francois M, Foct F (2006) Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures [J]. J Phys IV 48(12):3988–4000
10. Xu G, Xu K, Wang Q et al (2012) Simulation analysis of whole cracking process due to reinforcement corrosion in concrete structures [J]. J Build Mater 15(3):327–333 (in Chinese)
11. Du YG, Chan AHC, Clark LA (2006) Finite element analysis of the effects of radial expansion of corroded reinforcement[J]. Comput Struct 84(13):917–929
12. Liang XW, Deng MK, Tong YS (2011) The basic principle of concrete structure [M]. Chongqing University Press, Chongqing, pp 19–26 (in Chinese)
13. China Academy of Building Research (2010) GB50010-2010, Code for design of concrete structures [S] China building industry press, Beijing
14. Xu G, Wei J (2005) Research on corroded expansive force of the concrete reinforced bar [J]. J Fuzhou Univ (Nat Sci Ed) 33(Z):101–105 (in Chinese)
15. Xu G, Bao H, Wang Q, Xu LL (2015) Research on volumetric expansion ratio of corrosion products in concrete structure [J]. J Huazhong Univ Sci Technol (Nat Sci Ed) 43(9):105–109 (in Chinese)
16. Xu G, Wei J, Tan T, Liu HQ (2007) Modeling bond strength of corroded plain bar reinforcement in concrete. Struct Concr 8(3):133–13810.1680/stco.2007.8.3.133 ↗
17. Qian JH (1988) Soil mechanics [M]. Hohai University Press, Jiangsu, pp 75–77 (in Chinese)
18. Nanjing Hydraulic Research Institute (1999) GB/T 50123–1999, Chinese standard for soil test method [S]. China Planning Press, Beijing
19. Zhao YX, Ren HY, Dai H et al (2011) Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis [J]. Corros Sci 53(5):1646–165810.1016/j.corsci.2011.01.007 ↗
20. Ji YS, Yuan YS, Song M et al (2011) Volume expansion characteristic and mechanism of rebar corrosion products in concrete with different corrosion approaches [J]. J Beijing Univ Technol 37(11):1677–1683 (in Chinese)
21. Wen T (2014) Applicability study on electrifying corrosion methods of reinforced concrete members[D]. China Three Gorges University, Yichang (in Chinese)
22. Xu G, Bao H, Wang Q, Xu HM, Xu LL (2014) Cutting ring device of the ultrahigh pressure loading [P], China, ZL201420317287.6, 22 Oct 2014