journal article·2008-07

Micromechanical finite element framework for predicting viscoelastic properties of asphalt mixtures

Qingli Dai, Zhanping You

Materials and Structures· Volume 41· Issue 6
Publisher page

Abstract

A micromechanical finite element (FE) framework was developed to predict the viscoelastic properties (complex modulus and creep stiffness) of the asphalt mixtures. The two-dimensional (2D) microstructure of an asphalt mixture was obtained from the scanned image. In the mixture microstructure, irregular aggregates and sand mastic were divided into different subdomains. The FE mesh was generated within each aggregate and mastic subdomain. The aggregate and mastic elements share nodes on the aggregate boundaries for deformation connectivity. Then the viscoelastic mastic with specified properties was incorporated with elastic aggregates to predict the viscoelastic properties of asphalt mixtures. The viscoelastic sand mastic and elastic aggregate properties were inputted into micromechanical FE models. The FE simulation was conducted on a computational sample to predict complex (dynamic) modulus and creep stiffness. The complex modulus predictions have good correlations with laboratory uniaxial compression test under a range of loading frequencies. The creep stiffness prediction over a period of reduced time yields favorable comparison with specimen test data. These comparison results indicate that this micromechanical model is capable of predicting the viscoelastic mixture behavior based on ingredient properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Rock Mechanics and Modeling · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Chen JS, Wong SY, Lin KY (2005) Quantification of movements of flat and elongated particles in hot mix asphalt subject to wheel load test. Mater Struct/Materiaux et Constructions 38:395–40210.1617/14151 ↗
2. Voigt W (1889) Ueber die Beziehung zwischen den beiden Elasticitatsconstanten isotroper Korper, pp 573–58710.1002/andp.18892741206 ↗
3. Hashin Z, Shtrikman S (1963) A variational approach to the theory of the elastic behaviour of multiphase materials. J Mech Phys Solids 11:13710.1016/0022-5096(63)90060-7 ↗
4. Schapery R (1978) Extension and replacement of asphalt cement sulfur. FHWA, US Department of Transportation
5. Buttlar WG, Roque R (1996) Evaluation of empirical and theoretical models to determine asphalt mixture stiffnesses at low temperatures (with discussion). Assoc of Asphalt Paving Tech 65:99–141
6. Buttlar WG, Roque R (1997) Effect of asphalt mixture master compliance modeling technique on thermal cracking performance evaluation using superpave. University of Washington, Seattle, pp 1659–1669
7. Hashin Z (1965) Viscoelastic behaviour of heterogeneous media. J Appl Mech Trans ASME 9:630–63610.1115/1.3627270 ↗
8. Christensen RM, Lo KH (1979) Solutions for effective shear properties in three phase sphere and cylinder models. J Mech Phys Solids 27:315–33010.1016/0022-5096(79)90032-2 ↗
9. Buttlar WG, Bozkurt D, Al-Khateeb GG, Waldhoff AS (1999) Understanding asphalt mastic behavior through micromechanics (with discussion and closure). Transportation Research Board, pp 157–16910.3141/1681-19 ↗
10. Shashidhar N, Needham SP, Chollar BH, Romero P (1996) Prediction of the performance of mineral fillers in stone matrix asphalt. J Assoc Asphalt Paving Tech 68:222–251
11. Chang GK, Meegoda JN (1997) Micromechanical simulation of hot mixture asphalt. ASCE J Eng Mech 123:495–50310.1061/(ASCE)0733-9399(1997)123:5(495) ↗
12. Chang GK, Meegoda JN (1999) Micro-mechanic model for temperature effects of hot mixture asphalt concrete. J Trans Res Record Natl Res Counc, Washington, DC 1687:95–103
13. Rothenburg L, Bogobowicz A, Hass R (1992) Micromechanical modelling of asphalt concrete in connection with pavement rutting problems. In 7th International Conference on Asphalt Pavements, pp 230–245
14. Trent BC, Margolin LG (1994) Modeling fracture in cemented granular materials. Geotechnical Special Publication, vol 43. ASCE, pp 54–69
15. Buttlar WG, You Z (2001) Discrete element modeling of asphalt concrete: a micro-fabric approach. Journal of the Transportation Board, National Research Council, Washington, DC, 1757:111–11810.3141/1757-13 ↗
16. Ullidtz P (2001) A study of failure in cohesive particulate media using the discrete element method. Proc 80th Transportation Research Board Meeting, Washington, DC
17. Sadd MH, Qiu L, Boardman WG, Shukla A (1992) Modelling wave propagation in granular media using elastic networks. Int J Rock Mech Mining Sci Geomech Abstracts 29:161–17010.1016/0148-9062(92)92126-W ↗
18. Sadd MH, Gao JY (1997) The effect of particle damage on wave propagation in granular materials, mechanics of deformation and flow of particulate materials. In: Chang CS, Misra A, Liang RY, Babic M (eds) Proc McNu Conference, Trans. ASCE, Northwestern Univ.
19. You Z, Buttlar WG (2004) Discrete element modeling to predict the modulus of asphalt concrete mixtures. J Mater Civil Eng ASCE 16:140–14610.1061/(ASCE)0899-1561(2004)16:2(140) ↗
20. You Z, Buttlar WG (2005) Application of discrete element modeling techniques to predict the complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure. J Trans Res Board Natl Res Counc 1929:218–22610.3141/1929-26 ↗
21. You Z, Buttlar WG (2006) Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixture using the distinct element method. Transportation Research Record. Journal of the Transportation Research Board, National Research Council, Washington, DC 1970:73–8310.3141/1970-09 ↗
22. Stankowski T (1990) Numerical simulation of failure in particle composite, computers and structures. Comput Struct Great Britain 44:460
23. Sepehr K, Harvey OJ, Yue ZQ, El Husswin HM (1994) Finite element modeling of asphalt concrete microstructure. Proc 3rd Int Conf Computer-Aided Assessment and Control Localized Damage, Udine, Italy
24. Bazant ZP, Tabbara MR, Kazemi Y, Pijaudier-Cabot G (1990) Random particle simulation of damage and fracture in particulate or fiber-reinforced composites, vol 109. Dallas, TX, USA: Publ by ASME, New York, NY, USA, pp 41–55
25. Mora P (1992) A lattice solid model for rock rheology and tectonics. In The Seismic Simulation Project Tech., vol 4. Institut de Physique du Globe, Paris, pp 3–28
26. Budhu M, Ramakrishnan S, Frantziskonis G (1997) Modeling of granular materials: a numerical model using lattices, mechanics of deformation and flow of particulate materials. In: Chang CS, Misra A, Liang RY, Babic M (eds) Proc McNu Conference, Trans. ASCE, Northwestern Univ.
27. Guddati MN, Feng Z, Kim R (2002) Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete. Transportation Research Record, pp 121–12810.3141/1789-13 ↗
28. Bahia HU, Zhai H, Onnetti K, Kose S (1999) Non-linear viscoelastic and fatigue properties of asphalt binders. Association of Asphalt Paving Technologists, pp 1–34
29. Papagiannakis AT, Abbas A, Masad E (2002) Micromechanical analysis of viscoelastic properties of asphalt concretes. Transportation Research Record, pp 113–12010.3141/1789-12 ↗
30. Mustoe GGW, Griffiths DV (1998) An equivalent model using discrete element method (DEM). In Proc 12th ASCE Engineering Mechanics Conf., La Jolla, CA
31. Kose S, Guler M, Bahia HU, Masad E (2000) Distribution of strains within asphalt binders in HMA Using Image and finite element techniques. J Trans Res Record National Research Council, Washington, DC, 1728
32. Wang L, Frost JD, Shashidhar N (2001) Microstructure study of westrack mixes from X-ray tomography images. J Trans Res Rec Natl Res Counc, Washington, DC 1767:85–94
33. Wang L, Paul HS, Harman T, D’Angelo J (2004) Characterization of aggregates and asphalt concrete using X-ray computerized tomography a state of the art report, vol 73. Association of Asphalt Paving Technologist, pp 467–500
34. Masad E (2004) X-ray computed tomography of aggregates and asphalt mixes. Mater Eval 62:775–783
35. Birgisson B, Soranakom C, Napier JAL, Roque R (2003) Simulation of fracture initiation in hot-mix asphalt mixtures. Transportation Research Record, pp 183–19010.3141/1849-20 ↗
36. Sadd MH, Dai Q, Parameswaran V, Shukla A (2004) Simulation of asphalt materials using finite element micromechanical model with damage mechanics. Transportation Research Record, pp 86–95
37. Sadd MH, Dai Q, Parameswaran V, Shukla A (2004) Microstructural simulation of asphalt materials: modeling and experimental studies. J Mater Civil Eng 16:107–11510.1061/(ASCE)0899-1561(2004)16:2(107) ↗
38. Dai Q, Sadd MH (2004) Parametric model study of microstructure effects on damage behavior of asphalt samples. Int J Pav Eng 5:19–3010.1080/10298430410001720783 ↗
39. Dai Q, Sadd MH, Parameswaran V, Shukla A (2005) Prediction of damage behaviors in asphalt materials using a micromechanical finite-element model and image analysis. J Eng Mech 131:668–67710.1061/(ASCE)0733-9399(2005)131:7(668) ↗
40. Dai Q, Sadd MH, You Z (2006) A micromechanical finite element model for viscoelastic creep and viscoelastic damage behavior of asphalt mixture. Int J Numeric Anal Meth Geomech 30:1135–115810.1002/nag.520 ↗
41. Dai Q (2004) Micromechanical modeling of constitutive and damage behavior of heterogeneous asphalt materials. University of Rhode Island
42. You Z (2003) Development of a micromechanical modeling approach to predict asphalt mixture stiffness using discrete element method. University of Illinois at Urbana-Champaign, Department of Civil and Environmental Engineering, UMI, a Bell & Howell Information Company, Ann Arbor, MI
43. Dai Q, You Z (2007) Prediction of creep stiffness of asphalt mixture with micromechanical finite element and discrete element methods. J Eng Mech ASCE 133(2):163–173
44. Dai Q, You Z, Sadd MH (2006) A micromechanical viscoelaso-plastic model for asphalt mixtures. Geotech Special Publication (GSP): Asphalt Concrete: Simul Model Exp Characterization. Am Soc Civil Eng (ASCE), 12–20
45. Sadd MH, Dai Q, Parameswaran V (2004) Microstructural simulation of asphalt materials: modeling and experimental studies. J Mater Civil Eng 16:107–11510.1061/(ASCE)0899-1561(2004)16:2(107) ↗