Predictive methods for the evolution of oil well cement strength based on porosity
Source abstract
Abstract
Abstract The oil well cement undergoes various physical and chemical changes during the hydration process, leading to the formation of pores of different sizes within the cement stone. These pores can affect the mechanical properties of the cement stone. In the civil engineering field, extensive attempts have been made to predict the mechanical properties of concrete based on pore parameters, yielding good results. This paper explores in detail the methods for predicting the strength of oil well cement based on porosity and pore size distribution. Through referencing the strength prediction methods for concrete in civil engineering, porosity and pore size distribution are used as prediction parameters. The accuracy of predictions made by empirical models and deep learning models is compared, and it is concluded that neither empirical formulas nor ordinary deep learning models can provide accurate fitting results. However, due to the optimization of its algorithm and structure, the KAN model can give more accurate predictions of the pore-size-strength relationship of cement stone. Additionally, the quantitative relationship between pore size and strength of cement stone is explored. The application of the KAN model in strength prediction provides strong guidance for monitoring and optimizing cementing quality during the construction process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Drilling and Well Engineering · Hydraulic Fracturing and Reservoir Analysis · Reservoir Engineering and Simulation Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Nelson EB, Eilers LH (1985) Cementing steamflood and fireflood wells-slurry design. J Can Pet Technol. https://doi.org/10.2118/85-05-0610.2118/85-05-06 ↗
2. Laterza M, D’Amato M, Braga F et al (2017) Extension to rectangular section of an analytical model for concrete confined by steel stirrups and/or FRP jackets[J]. Compos Struct 176:910–92210.1016/j.compstruct.2017.06.025 ↗
3. Mander JB, Priestley MJN, Park R (1988) Observed stress-strain behavior of confined concrete[J]. J Struct Eng 114(8):1827–184910.1061/(ASCE)0733-9445(1988)114:8(1827) ↗
4. Alexanderson J (1979) Relations between structure and mechanical properties of autoclaved aerated concrete. Cem Concr Res 9(4):507–51410.1016/0008-8846(79)90049-8 ↗
5. Muller A et al (2013) Use of bench-top NMR to measure the density, composition and desorption isotherm of C-S–H in cement paste. Microporous Mesoporous Mater 178:99–10310.1016/j.micromeso.2013.01.032 ↗
6. Nambiar EK, Ramamurthy K (2007) Air-void characterisation of foam concrete. Cem Concr Res 37(2):221–23010.1016/j.cemconres.2006.10.009 ↗
7. Odler I, Rößler M (1985) Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydration. Cem Concr Res 15(3):401–41010.1016/0008-8846(85)90113-9 ↗
8. Mydin MAO, Wang YC (2012) Mechanical properties of foamed concrete exposed to high temperatures. Constr Build Mater 26(1):638–65410.1016/j.conbuildmat.2011.06.067 ↗
9. Hilal AA, Thom NH, Dawson AR (2015) On entrained pore size distribution of foamed concrete. Constr Build Mater 75:227–23310.1016/j.conbuildmat.2014.09.117 ↗
10. Nambiar EK, Ramamurthy K (2006) Influence of filler type on the properties of foam concrete. Cem Concr Compos 28(5):475–48010.1016/j.cemconcomp.2005.12.001 ↗
11. Balshin MY (1949) Relation of mechanical properties of powder metals and their porosity and the ultimate properties of porous metal-ceramic materials. In Dokl Akad Nauk SSSR
12. Ryshkewitch E (1953) Compression strength of porous sintered alumina and zirconia: 9th communication to ceramography. J Am Ceram Soc 36(2):65–6810.1111/j.1151-2916.1953.tb12837.x ↗
13. Schiller KK (1971) Strength of porous materials. Cem Concr Res 1(4):419–42210.1016/0008-8846(71)90035-4 ↗
14. Hasselman D (1969) Griffith flaws and the effect of porosity on tensile strength of brittle ceramics. J Am Ceram Soc 52(8):457–45710.1111/j.1151-2916.1969.tb11982.x ↗
15. Shen Z et al (2020) MLP neural network-based recursive sliding mode dynamic surface control for trajectory tracking of fully actuated surface vessel subject to unknown dynamics and input saturation. Neurocomputing 377:103–11210.1016/j.neucom.2019.08.090 ↗
16. Kearsley EP, Wainwright PJ (2002) The effect of porosity on the strength of foamed concrete. Cem Concr Res 32(2):233–23910.1016/S0008-8846(01)00665-2 ↗
17. Collins F, Sanjayan JG (2000) Effect of pore size distribution on drying shrinking of alkali-activated slag concrete. Cem Concr Res 30(9):1401–140610.1016/S0008-8846(00)00327-6 ↗
18. Wang P et al (2020) Meso-damage evolution analysis of magnesium oxychloride cement concrete based on X-CT and grey-level co-occurrence matrix. Constr Build Mater 255:11937310.1016/j.conbuildmat.2020.119373 ↗
19. Nehdi M, Djebbar Y, Khan A (2001) Neural network model for preformed-foam cellular concrete. Mater J 98(5):402–409
20. Chithra S et al (2016) A comparative study on the compressive strength prediction models for high performance concrete containing nano silica and copper slag using regression analysis and artificial neural networks. Constr Build Mater 114:528–53510.1016/j.conbuildmat.2016.03.214 ↗
21. Lee J, Lee J, Cho B (2012) Effective prediction of thermal conductivity of concrete using neural network method. Int J Concr Struct Mater 6:177–18610.1007/s40069-012-0016-x ↗
22. Bal L, Buyle-Bodin F (2014) Artificial neural network for predicting creep of concrete. Neural Comput Appl 25:1359–136710.1007/s00521-014-1623-z ↗
23. Liu Z et al. (2024) Kan: Kolmogorov-arnold networks. arXiv preprint arXiv:2404.19756
24. Chen X, Wu S, Zhou J (2013) Influence of porosity on compressive and tensile strength of cement mortar. Constr Build Mater 40:869–87410.1016/j.conbuildmat.2012.11.072 ↗
25. Yang S, Mao HT, Liu C (2024) Modeling the relationship between compressive strength and poredistribution characteristics of medium-to-high strength concrete. J Changjiang River Sci Res Inst 41(4):194–202
26. Wang Z, Wang Q, Ai T (2014) Comparative study on effects of binders and curing ages on properties of cement emulsified asphalt mixture using Gray correlation entropy analysis. Constr Build Mater 54:615–62210.1016/j.conbuildmat.2013.12.093 ↗
27. Pallapothu SNRG, Pancharathi RK, Janib R (2023) Predicting concrete strength through packing density using machine learning models. Eng Appl Artif Intell 126:10717710.1016/j.engappai.2023.107177 ↗
28. De Prado-Gil J et al (2024) To determine the compressive strength of self-compacting recycled aggregate concrete using artificial neural network (ANN). Ain Shams Eng J 15(2):10254810.1016/j.asej.2023.102548 ↗
29. Pang X et al (2021) Long-term strength retrogression of silica-enriched oil well cement: a comprehensive multi-approach analysis. Cem Concr Res 144:10642410.1016/j.cemconres.2021.106424 ↗
30. Roy DM, Gouda CR (1973) Porosity-strength relation in cementitious materials with very high strengths. Am Ceram Soc J 56(10):54910.1111/j.1151-2916.1973.tb12410.x ↗
31. Relis M, Soroka I (1980) Compressive strength of low-porosity hydrated Portland cement. J Am Ceram Soc 63(11–12):690–69410.1111/j.1151-2916.1980.tb09862.x ↗
32. Li Y et al (2006) A study on the relationship between porosity of the cement paste with mineral additives and compressive strength of mortar based on this paste. Cem Concr Res 36(9):1740–174310.1016/j.cemconres.2004.07.007 ↗
33. Cheng JW, Huang T, Yang JY (2023) Grey system model for predicting compressive strength of permeable concrete. Concrete 3:54–58
34. Chen YF, Ai J, Che J (2024) Study on mechanical properties and pore structure model of concrete under freezethaw action based on grey correlation entropy. China Meas Test 50(5):29–35
35. Jiang T et al (2021) Long-term thermal performance of oil well cement modified by silica flour with different particle sizes in HTHP environment. Constr Build Mater 296:12370110.1016/j.conbuildmat.2021.123701 ↗
36. Wang C et al (2022) The effect of rutin on the early-age hydration of oil well cement at varying temperatures. Cem Concr Compos 128:10443810.1016/j.cemconcomp.2022.104438 ↗
37. Wang C et al (2022) Benefits of delayed addition of rutin on the thickening time and compressive strength of oil well cement. Constr Build Mater 322:12628710.1016/j.conbuildmat.2021.126287 ↗
38. Dai T et al (2023) Reinforcement of oil well cement composites with alumina nanofibers under high temperature/pressure curing condition: mechanical and microstructural properties. Constr Build Mater 364:12991310.1016/j.conbuildmat.2022.129913 ↗
39. Cheng G et al (2024) Combined use of fly ash and silica to prevent the long-term strength retrogression of oil well cement set and cured at HPHT conditions. Pet Sci 21(2):1122–113410.1016/j.petsci.2023.09.010 ↗
40. Ahmed A, Khan F, Elkatatny S (2023) Utilization of vermiculite particles in the enhancement of the ilmenite based oil well cement properties. Geoenergy Sci Eng 231:21239810.1016/j.geoen.2023.212398 ↗
41. Ahmed A, Elkatatny S, Adebayo AR (2024) Minimizing the particles settling of ilmenite weighted oil well cement using laponite. Geoenergy Sci Eng 232:21247110.1016/j.geoen.2023.212471 ↗
42. Zhang C et al (2020) Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement. Constr Build Mater 260:12046110.1016/j.conbuildmat.2020.120461 ↗
43. Kuzielová E et al (2017) Pore structure development of blended G-oil well cement submitted to hydrothermal curing conditions. Geothermics 68:86–9310.1016/j.geothermics.2017.03.001 ↗
44. Zhang GG, Wang CY, Dai D et al (2022) The effects of particle size of silica flour on the performance of oil well cement at high temperature and high pressure[J]. Drill Fluid Complet Fluid 39(4):466–471
45. Xu M et al (2023) Magnesium oxychloride cement with hydrophobic pore network for utilizing as oil well cement. Constr Build Mater 409:13374510.1016/j.conbuildmat.2023.133745 ↗
46. Liu H et al (2020) Influence of halloysite nanotube on hydration products and mechanical properties of oil well cement slurries with nano-silica. Constr Build Mater 247:11854510.1016/j.conbuildmat.2020.118545 ↗