The heterogeneous characteristics of the microstructure in cement stone under the effect of self-weight segregation
Source abstract
Abstract
Abstract Under the influence of self-weight segregation, the microstructure of cement stone exhibits significant heterogeneous characteristics, but the mechanisms of these variations have not been revealed. In this study, the pore size distribution and porosity of the cement stone with various water-to-cement (w/c) ratios and the initial height were measured using NMR methods. The relationships between cement stone porosity and height position were fitted using a simplified self-weight consolidation finite model and a small strain model. The results show that under the same w/c ratios, the density and porosity of the stones formed at the bottom of cement grout columns with different initial heights are essentially consistent. The variation trend in the porosity of cement stone with a lower w/c ratio, such as 0.8, aligns with the predictions of the finite strain model. However, as the w/c ratio increases, like 1.0 or 1.2, the reduction in effective stress between particles delays the self-weight consolidation process, enhancing the influence of cement hydration. The skeletal structure formed by the hydration products results in a decrease in consolidation strain, ultimately making the porosity change more consistent with a small strain model. Additionally, XRD patterns and SEM images show that with increasing height position, the amount of ettringite increases while C-S-H decreases, leading to a looser structure of the cement stone and an increase in porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Building materials and conservation · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Zhou X, Qian Q, Yang H (2011) Rock burst of deep circular tunnels surrounded by weakened rock mass with cracks. Theor Appl Fract Mec 56(2):79–88. https://doi.org/10.1016/j.tafmec.2011.10.00310.1016/j.tafmec.2011.10.003 ↗
2. Zhang C, Feng X, Zhou H, Qiu S, Wu W (2012) Case histories of four extremely intense rockbursts in deep tunnels. Rock Mech Rock Eng 45(3):275–288. https://doi.org/10.1007/s00603-011-0218-610.1007/s00603-011-0218-6 ↗
3. Bolla A, Paronuzzi P (2020) Numerical investigation of the pre-collapse behavior and internal damage of an unstable rock slope. Rock Mech Rock Eng 53(5):2279–230010.1007/s00603-019-02031-z ↗
4. El Tani M (2012) Grouting rock fractures with cement grout. Rock Mech Rock Eng 45:547–561. https://doi.org/10.1007/S00603-012-0235-010.1007/S00603-012-0235-0 ↗
5. Li S, Liu R, Zhang Q, Zhang X (2016) Protection against water or mud inrush in tunnels by grouting: a review. J Rock Mech Geotech Eng 8(5):753–766. https://doi.org/10.1016/j.jrmge.2016.05.00210.1016/j.jrmge.2016.05.002 ↗
6. Sha F, Lin C, Li Z, Liu R (2019) Reinforcement simulation of water-rich and broken rock with Portland cement-based grout. Constr Build Mater 221:292–300. https://doi.org/10.1016/j.conbuildmat.2019.06.09410.1016/j.conbuildmat.2019.06.094 ↗
7. Han J, Wang K (2016) Influence of bleeding on properties and microstructure of fresh and hydrated Portland cement paste. Constr Build Mater 115:240–246. https://doi.org/10.1016/j.conbuildmat.2016.04.05910.1016/j.conbuildmat.2016.04.059 ↗
8. Mueller S, Llewellin EW, Mader HM (2010) The rheology of suspensions of solid particles, proceedings of the Royal Society a mathematical. Phys Eng Sci 466:1201–1228. https://doi.org/10.1098/rspa.2009.044510.1098/rspa.2009.0445 ↗
9. Rosquoët F, Alexis A, Khelidj A, Phelipot A (2003) Experimental study of cement grout: rheological behavior and sedimentation. Cem Concr Res 33:713–722. https://doi.org/10.1016/S0008-8846(02)01036-010.1016/S0008-8846(02)01036-0 ↗
10. Massoussi N, Keita E, Roussel N (2017) The heterogeneous nature of bleeding in cement pastes. Cem Concr Res 95:108–116. https://doi.org/10.1016/j.cemconres.2017.02.01210.1016/j.cemconres.2017.02.012 ↗
11. Odler I, Rößler M (1985) Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydration. Cem Concr Res 15(3):401–410. https://doi.org/10.1016/0008-8846(85)90044-410.1016/0008-8846(85)90044-4 ↗
12. Kumar R, Bhattacharjee B (2003) Porosity, pore size distribution and in situ strength of concrete. Cem Concr Res 33(1):155–164. https://doi.org/10.1016/S0008-8846(02)00942-010.1016/S0008-8846(02)00942-0 ↗
13. Yudenfreund M, Hanna KM, Skalny J (1972) Hardened Portland cement pastes of low porosity V compressive strength. Cem Concr Res 2(6):731–743. https://doi.org/10.1016/0008-8846(72)90008-710.1016/0008-8846(72)90008-7 ↗
14. Auskern A, Horn W (1973) Capillary porosity in hardened cement paste. J Test Eval 1(1):74–79. https://doi.org/10.1520/jte11604j10.1520/jte11604j ↗
15. Jin S, Zhang J, Han S (2017) Fractal analysis of relation between strength and pore structure of hardened mortar. Constr Build Mater 135:1–7. https://doi.org/10.1016/j.conbuildmat.2016.12.15210.1016/j.conbuildmat.2016.12.152 ↗
16. Li S, Sha F, Liu R, Zhang Q, Li Z (2017) Investigation on fundamental properties of microfine cement and cement-slag grouts. Constr Build Mater 153:965–974. https://doi.org/10.1016/j.conbuildmat.2017.05.18810.1016/j.conbuildmat.2017.05.188 ↗
17. Josserand L, Coussy O, de Larrard F (2006) Bleeding of concrete as an ageing consolidation process. Cem Concr Res 36:1603–1608. https://doi.org/10.1016/j.cemconres.2004.10.00610.1016/j.cemconres.2004.10.006 ↗
18. Ji Y, Pel L, Sun Z (2019) The microstructure development during bleeding of cement paste: an NMR study. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2019.10586610.1016/j.cemconres.2019.105866 ↗
19. Morris PH, Dux PF (2010) Analytical solutions for bleeding of concrete due to consolidation. Cem Concr Res 40:1531–1540. https://doi.org/10.1016/j.cemconres.2010.06.00710.1016/j.cemconres.2010.06.007 ↗
20. Tan TS, Wee TH, Tan SA, Tam CT, Lee SL (1987) A consolidation model for bleeding of cement paste. Adv Cem Res 1(1):18–26. https://doi.org/10.1680/adcr.1987.1.1.1810.1680/adcr.1987.1.1.18 ↗
21. Tan TS, Loh CK, Yong KY, Wee TH (1997) Modelling of bleeding of cement paste and mortar. Adv Cem Res 9(34):75–91. https://doi.org/10.1680/adcr.1997.9.34.7510.1680/adcr.1997.9.34.75 ↗
22. Yaseri S, Mahdikhani M, Jafarinoor A, Verki VM (2018) The development of new empirical apparatuses for evaluation fresh properties of self-consolidating mortar: theoretical and experimental study. Constr Build Mater 167:631–648. https://doi.org/10.1016/j.conbuildmat.2018.02.02110.1016/j.conbuildmat.2018.02.021 ↗
23. Li S, Tang D, Pan Z (2013) Characterization of the stress sensitivity of pores for different rank coals by nuclear magnetic resonance. Fuel 111:746–754. https://doi.org/10.1016/j.fuel.2013.05.00310.1016/j.fuel.2013.05.003 ↗
24. Cutmore NG, Sowerby BD, Lynch LJ (1986) Determination of moisture in black coal using pulsed nuclear magnetic resonance spectrometry. Fuel 65(1):34–39. https://doi.org/10.1016/0016-2361(86)90138-910.1016/0016-2361(86)90138-9 ↗
25. Frosch G, Tillich JE, Haselmeier RP (2000) Probing the pore space of geothermal reservoir sandstones by nuclear magnetic resonance. Geothermics 29(6):671–687. https://doi.org/10.1016/S0375-6505(00)00031-610.1016/S0375-6505(00)00031-6 ↗
26. Fourmentin M, Faure P, Rodts S, Peter U (2017) NMR observation of water transfer between a cement paste and a porous medium. Cem Concr Res 95:56–64. https://doi.org/10.1016/j.cemconres.2017.02.02710.1016/j.cemconres.2017.02.027 ↗
27. Bligh MW, d’Eurydice MN, Lloyd RR, Arns CH (2016) Investigation of early hydration dynamics and microstructural development in ordinary Portland cement using 1H NMR relaxometry and isothermal calorimetry. Cem Concr Res 83:131–139. https://doi.org/10.1016/j.cemconres.2016.01.00710.1016/j.cemconres.2016.01.007 ↗
28. Ji Y, Sun Z, Yang X, Li C, Tang X (2015) Assessment and mechanism study of bleeding process in cement paste by 1H low-field NMR. Constr Build Mater 100:255–261. https://doi.org/10.1016/j.conbuildmat.2015.09.06210.1016/j.conbuildmat.2015.09.062 ↗
29. Liu C, Zhu D, Liu H, Cui J, Zhang X (2024) Influence of synchronous grouting on surrounding sandy cobbles during shield tunnelling process: Insights from a scaled model test. Tunn Undergr Sp Tech 147:105728. https://doi.org/10.1016/j.tust.2024.10572810.1016/j.tust.2024.105728 ↗
30. Yu Y, Zhang J, Fan L, Shi Z, Sun L (2021) Experimental study on grouting of elliptical fractured rock mass at various temperatures. Arab J Geosci 14:1–11. https://doi.org/10.1007/s12517-021-08237-210.1007/s12517-021-08237-2 ↗
31. Shi H, Zhang Y, Tang L (2021) Physical test of fracture development in the overburden strata above the goaf and diffusion process of permeable grout slurry. B Eng Geol Environ 80:4791–4802. https://doi.org/10.1007/s10064-021-02189-310.1007/s10064-021-02189-3 ↗
32. Guo X, Li Z, Zhang X, Pu M (2022) Model test study on a shield tunnel adjacent to pile in the sub-clay of a coastal area. Appl Sci 12(15):7718. https://doi.org/10.3390/app1215771810.3390/app12157718 ↗
33. Qin L, Zhai C, Liu S, Xu J, Yu G, Sun Y (2017) Changes in the petrophysical properties of coal subjected to liquid nitrogen freeze-thaw–a nuclear magnetic resonance investigation. Fuel 194:102–114. https://doi.org/10.1016/j.fuel.2017.01.00510.1016/j.fuel.2017.01.005 ↗
34. Wang X, Li S, Zhou A, Liu R (2021) Influence of the bleeding characteristic on density and rheology in cement slurry. Constr Build Mater 269:121316. https://doi.org/10.1016/j.conbuildmat.2020.12131610.1016/j.conbuildmat.2020.121316 ↗
35. Li S, Yang J, Zhang P (2020) Water-cement-density ratio law for the 28-day compressive strength prediction of cement-based materials. Adv Mater Sci Eng 1:7302173. https://doi.org/10.1155/2020/730217310.1155/2020/7302173 ↗
36. Mehdipour I, Khayat KH (2017) Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste. Cem Concr Com 78:120–131. https://doi.org/10.1016/j.cemconcomp.2017.01.00510.1016/j.cemconcomp.2017.01.005 ↗
37. Mindess S, Young JF, Darwin D (2003) Concrete, 2nd edn. Prentice Hall, Hoboken
38. Wang J, Xue C, Zhang Y, Li Q, Han Y, Qiao H (2023) Study of early-age hydration, mechanical properties development, and microstructure evolution of manufactured sand concrete mixed with granite stone powder. Materials 16(13):4857. https://doi.org/10.3390/ma1613485710.3390/ma16134857 ↗
39. Song Y, Zhou J, Bian Z, Dai G (2019) Pore structure characterization of hardened cement paste by multiple methods. Adv Mater Sci Eng 1:3726953. https://doi.org/10.1155/2019/372695310.1155/2019/3726953 ↗
40. Dai J, Wang Q, Zhang X, Bi R, Du W (2022) Effect of content and fineness of GGBS on pore structure of cement paste. J Wuhan Univ Technol Sci Ed 37(5):933–947. https://doi.org/10.1007/s11595-022-2616-x10.1007/s11595-022-2616-x ↗
41. Powers TC (1958) Structure and physical properties of hardened Portland cement paste. J Am Ceram Soc 41(1):1–6. https://doi.org/10.1111/J.1151-2916.1958.tb13494.x10.1111/J.1151-2916.1958.tb13494.x ↗
42. Cai R, Tian Z, Ye H, He Z (2021) The role of metakaolin in pore structure evolution of Portland cement pastes revealed by an impedance approach. Cem Concr Com 119:103999. https://doi.org/10.1016/j.cemconcomp.2021.10399910.1016/j.cemconcomp.2021.103999 ↗
43. Garcia-Lodeiro I, Goracci G, Dolado JS (2021) Mineralogical and microstructural alterations in a portland cement paste after an accelerated decalcification process. Cem Concr Res 140:106312. https://doi.org/10.1016/j.cemconres.2020.10631210.1016/j.cemconres.2020.106312 ↗
44. Gu Y, Martin RP, Metalssi OO, Fen-Chong T, Dangla P (2019) Pore size analyses of cement paste exposed to external sulfate attack and delayed ettringite formation. Cem Concr Res 123:105766. https://doi.org/10.1016/J.cemconres.2019.05.01110.1016/J.cemconres.2019.05.011 ↗
45. Sha S, Ma Y, Lei L, Zhang Y, Liu Y, Xiao Y, Shi C (2022) Effect of polycarboxylate superplasticizers on the growth of ettringite in deionized water and synthetic cement pore solution. Constr Build Mater 341:127602. https://doi.org/10.1016/j.conbuildmat.2022.12760210.1016/j.conbuildmat.2022.127602 ↗
46. Cai Y, Tao Y, Xuan D, Sun Y, Poon CS (2023) Effect of seawater on the morphology, structure, and properties of synthetic ettringite. Cem Concr Res 163:107034. https://doi.org/10.1016/j.cemconres.2022.10703410.1016/j.cemconres.2022.107034 ↗
47. Xiao G, Tian Z, Xia J, Jin W (2024) Percolation exponent of cement paste based on pore morphology. J Chin Ceram Soc 52(11):3572–3582. https://doi.org/10.14062/j.issn.0454-5648. (in Chinese)10.14062/j.issn.0454-5648 ↗
48. Morris PH (2005) Analytical solutions of linear finite- and small-strain one-dimensional consolidation. Int J Num Analyt Meth Geomech 29:127–140. https://doi.org/10.1002/nag.40710.1002/nag.407 ↗
49. Jia Z, Chen C, Shi J, Zhang Y, Sun Z, Zhang P (2019) The microstructural change of C-S-H at elevated temperature in Portland cement/GGBFS blended system. Cem Concr Res 123:105773. https://doi.org/10.1016/j.cemconres.2019.05.01810.1016/j.cemconres.2019.05.018 ↗
50. Li X, Wang Z, Liu Y, Liu R (2024) Properties of cement grout doped with xanthan gum and welan gum at high hydration temperature. Constr Build Mater 420:135664. https://doi.org/10.1016/j.conbuildmat.2024.13566410.1016/j.conbuildmat.2024.135664 ↗
51. Peng J, Zhang J, Qu J (2006) The mechanism of the formation and transformation of ettringite. J Wuhan Univ Technol Mater Sci Ed 21:158–161. https://doi.org/10.1007/BF0284090810.1007/BF02840908 ↗
52. Opravil T, Ptáček P, Šoukal F, Havlica J, Brandštetr J (2013) The synthesis and characterization of an expansive admixture for M-type cements I. The influence of free CaO to the formation of ettringite. J Therm Anal Calorim 111:517–526. https://doi.org/10.1007/s10973-012-2554-510.1007/s10973-012-2554-5 ↗