journal article·2018-02

Dynamic tensile test of fly ash concrete under alternating tensile–compressive loading

Xudong Chen, Lingyu Xu, Jingwu Bu

Materials and Structures· Volume 51· Issue 1
Publisher page

Abstract

In order to obtain the post-peak stress–strain curve of plain concrete, the strain-controlled uniaxial tensile tests are carried out on cylindrical specimens. The tensile cyclic tests are performed between a lower compressive load and an upper load to the envelope curve. Test results have shown that residual strain accumulates slowly when the concrete is subjected to alternating tensile–compressive loading, during which the microcracks increase and aggregate. Meanwhile, the rates of stiffness degradation with cycles are similar in all cases. In the study, an analytical model of the post-peak cyclic behavior of concrete is proposed. The strain is decomposed into classical linear elastic strain and non-classical strain described in the Presach–Mayergoyz model, which describes the hysteresis behavior of concrete well from a microscopic point of view. A good agreement is obtained between the test data and calculated results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Oh BH (1991) Cumulative damage theory of concrete under variable-amplitude fatigue loadings. ACI Mater J 88(1):41–48
2. Vega IM, Bhatti MA, Nixon WA (1995) A non-linear fatigue damage model for concrete in tension. Int J Damage Mech 4(4):362–37910.1177/105678959500400404 ↗
3. Lee JS, Norouzi A, Kim YR (2016) Determining specimen geometry of cylindrical specimens for direct tension fatigue testing of asphalt concrete. J Test Eval 45(2):613–623
4. Lee HP, Awang AZ, Omar W (2014) Steel strap confined high strength concrete under uniaxial cyclic compression. Constr Build Mater 72:48–5510.1016/j.conbuildmat.2014.08.007 ↗
5. Ziaadiny H (2016) Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression. RILEM Mater Struct 49(4):1157–116410.1617/s11527-015-0565-y ↗
6. Sinaie S, Heidarpour A, Zhao XL, Sanjayan JG (2015) Effect of size on the response of cylindrical concrete samples under cyclic loading. Constr Build Mater 84:399–40810.1016/j.conbuildmat.2015.03.076 ↗
7. Isojeh B, El-Zeghayar M, Vecchio FJ (2017) Concrete damage under fatigue loading in uniaxial compression. ACI Mater J 114(2):225–235
8. Sinha BP, Gerstle KH, Tulin LG (1964) Stress–strain relations for concrete under cyclic loading. J ACI 61(2):195–211
9. Sima JF, Roca P, Molins C (2008) Cyclic constitutive model for concrete. Eng Struct 30(3):695–70610.1016/j.engstruct.2007.05.005 ↗
10. Breccolotti M, Bonfigli MF, D’Alessandro A, Materazzi AL (2015) Constitutive modeling of plain concrete subjected to cyclic uniaxial compressive loading. Constr Build Mater 94:172–18010.1016/j.conbuildmat.2015.06.067 ↗
11. Vega JPIM (1992) Nonlinear fatigue damage accumulation for concrete in tension and its application to concrete pavement systems. Ph.D. dissertation, the University of Iowa
12. Paschalis SA, Lampropoulos A (2016) Ultra high performance fiber reinforced concrete under cyclic loading. ACI Mater J 113(4):419–427
13. Reinhardt HW, Cornelissen HAW (1984) Post-peak cyclic behaviour of concrete in uniaxial tensile and alternating tensile and compressive loading. Cem Concr Res 14(2):263–27010.1016/0008-8846(84)90113-3 ↗
14. Yankelevsky DZ, Reinhardt HW (1987) Response of plain concrete to cyclic tension. ACI Mater J 84(5):365–373
15. Reinhardt HW, Cornelissen HAW, Hordijk DA (1986) Tensile tests and failure analysis of concrete. ASCE J Struct Eng 112(11):2462–247710.1061/(ASCE)0733-9445(1986)112:11(2462) ↗
16. Yankelevsky DZ, Reinhardt HW (1989) Uniaxial behavior of concrete in cyclic tension. ASCE J Struct Eng 115(1):166–18210.1061/(ASCE)0733-9445(1989)115:1(166) ↗
17. Hordijk D (1991) Local approach to fatigue of concrete. Ph.D. thesis, Delft University of Technology, Delft
18. Chen X, Huang Y, Chen C, Lu J, Fan X (2017) Experimental study and analytical modeling on hysteresis behavior of plain concrete in uniaxial cyclic tension. Int J Fatigue 96:261–26910.1016/j.ijfatigue.2016.12.002 ↗
19. Chen X, Bu J, Fan X, Lu J, Xu L (2017) Effect of loading frequency and stress level on low cycle fatigue behavior of plain concrete in direct tension. Constr Build Mater 133:367–37510.1016/j.conbuildmat.2016.12.085 ↗
20. Chen X, Bu J (2016) Experimental study on direct tensile behavior of concrete under various loading regimes. ACI Mater J 113(4):513–522
21. El-Kashif KF, Maekawa K (2004) Time-dependent nonlinearity of compression softening in concrete. J Adv Concr Technol 2(2):233–24710.3151/jact.2.233 ↗
22. Jenq Y, Shah S (1985) Two parameter fracture model for concrete. ASCE J Eng Mech 111(2):1227–124110.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
23. Gopalaratnam VS, Shah SP (1985) Softening response of plain concrete in direct tension. ACI J Proc 82(3):310–323
24. Yankelevsky DZ, Reinhardt HW (1987) Model for cyclic compressive behavior of concrete. ASCE J Struct Eng 113(2):228–24010.1061/(ASCE)0733-9445(1987)113:2(228) ↗
25. Collins MP, Mitchell D, MacGregor JG (1993) Structural design considerations for high-strength concrete. Concr Int 15(5):27–34
26. Carmeliet J, Van Den Abeele K (2004) Poromechanical approach describing the moisture influence on the non-linear quasi-static and dynamic behaviour of porous building materials. Mater Struct 37(4):271–28010.1007/BF02480635 ↗
27. McCall KR, Guyer RA (1994) Equation of state and wave propagation in hysteretic nonlinear elastic materials. J Geophys Res 99(12):23887–2389710.1029/94JB01941 ↗
28. Carmeliet J, Van Den Abeele KEA (2002) Application of the Preisach–Mayergoyz space model to analyze moisture effects on the nonlinear elastic response of rock. Geophys Res Lett 29(7):1144–114710.1029/2001GL014243 ↗