Thermoelectric properties of composite films prepared with benzodithiophene derivatives and carbon nanotubes
Source abstract
Abstract
Abstract Benzodithiophene (BDT)-based conjugated polymers have garnered considerable interest due to their planar backbones and improved carrier mobility, and have found wide application in organic field-effect transistors and organic photovoltaics. However, there are few reports on the use of these conjugated polymers as thermoelectric materials. In this work, the conjugated polymer poly(benzo[1,2-b:4,5-b’]dithiophene-alt-3,4-ethylenedioxythiophene) (PBDT-EDOT) was synthesized to investigate the thermoelectric behavior of its composite films with single-walled carbon nanotubes (SWCNTs). The polymer was characterized by 1 H NMR, gel permeation chromatography, thermal gravimetric analysis and differential scanning calorimetry. The thermoelectric properties, carrier concentration and mobility of the composite films were also measured. It was found that the composite with an SWCNT content of 30% exhibited a high Seebeck coefficient of 82.1 μV K −1 at room temperature. Additionally, for composites with SWCNT contents below 90%, the power factors reached the highest values at the glass transition point of PBDT-EDOT in the temperature range of 300–400 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. One-dimensional nanostructured oxides for thermoelectric applications and excitonic solar cells10.1016/j.nanoen.2012.02.012 ↗
3. Flexible thermoelectric materials and device optimization for wearable energy harvesting10.1039/C5TC01644D ↗
4. Enhancement of thermoelectric figure-of-merit by a bulk nanostructuring approach10.1002/adfm.200901512 ↗
5. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
6. Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently10.1002/adma.201305371 ↗
7. Enhanced thermoelectric performance of PEDOT: PSS/PANI-CSA polymer multilayer structures10.1039/C5EE03063C ↗
8. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
9. Polymer composites for thermoelectric applications10.1002/anie.201408431 ↗
10. Large-area, stretchable, super flexible and mechanically stable thermoelectric films of polymer/carbon nanotube composites10.1039/C5TC03768A ↗
11. Prospects for polymer-based thermoelectrics: state of the art and theoretical analysis10.1039/c2ee22124a ↗
12. Solution processed organic thermoelectrics: towards flexible thermoelectric modules10.1039/C4EE03297G ↗
13. Enhanced thermoelectric metrics in ultra-long electrodeposited PEDOT nanowires10.1021/nl103003d ↗
14. Thermoelectric energy from flexible P3HT films doped with a ferric salt of triflimide anions10.1039/c2ee23006b ↗
15. Synthesis and thermoelectric properties of polycarbazole, polyindolocarbazole, and polydiindolocarbazole derivatives10.1021/cm070063h ↗
16. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
17. Synthesis and characterization of poly-Schiff bases with a donor-acceptor structure containing thiophene units as thermoelectric materials10.1039/C5TC00065C ↗
18. Conducting polymer/carbon particle thermoelectric composites: emerging green energy materials10.1016/j.compscitech.2016.01.014 ↗
19. High thermoelectric performance of n-type PbTe1−ySy due to deep lying states induced by indium doping and spinodal decomposition10.1016/j.nanoen.2016.02.040 ↗
20. Naphtho[1,2-b:5,6-b′]dithiophene based two-dimensional conjugated polymers for highly efficient thick-film inverted polymer solar cells10.1021/cm5033223 ↗
21. Low-temperature, solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
22. Benzo[1,2-b:4,5-b[prime or minute]]dithiophene-based conjugated polymers: band gap and energy level control and their application in polymer solar cells10.1039/c1py00197c ↗
23. Structural design of benzo[1,2-b:4,5-b′]dithiophene-based 2D conjugated polymers with bithienyl and terthienyl substituents toward photovoltaic applications10.1021/ma401846n ↗
24. Application of benzodithiophene based A–D–A structured materials in efficient perovskite solar cells and organic solar cells10.1016/j.nanoen.2016.03.007 ↗
25. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
26. Printed thermocouple devices
27. Radiation damage to multi-walled carbon nanotubes and their Raman vibrational modes10.1016/j.carbon.2006.04.010 ↗
28. A new strategy to construct thermoelectric composites of SWCNTs and poly-Schiff bases with 1,4-diazabuta-1,3-diene structures acting as bidentate-chelating units10.1039/C6TA03988J ↗
29. Water-processable polymer-nanocrystal hybrids for thermoelectrics10.1021/nl102880k ↗
30. Flexible carbon nanotube papers with improved thermoelectric properties10.1039/C1EE01931G ↗