journal article·2021-12-14Open access

On the Etching Mechanism of Highly Hydrogenated SiN Films by CF4/D2 Plasma: Comparison with CF4/H2

Shih-Nan Hsiao, Thi-Thuy-Nga Nguyen, Takayoshi Tsutsumi, Kenji Ishikawa, Makoto Sekine, Masaru Hori

Coatings· Volume 11· Issue 12

Abstract

With the increasing interest in dry etching of silicon nitride, utilization of hydrogen-contained fluorocarbon plasma has become one of the most important processes in manufacturing advanced semiconductor devices. The correlation between hydrogen-contained molecules from the plasmas and hydrogen atoms inside the SiN plays a crucial role in etching behavior. In this work, the influences of plasmas (CF4/D2 and CF4/H2) and substrate temperature (Ts, from −20 to 50 °C) on etch rates (ERs) of the PECVD SiN films were investigated. The etch rate performed by CF4/D2 plasma was higher than one obtained by CF4/H2 plasma at substrate temperature of 20 °C and higher. The optical emission spectra showed that the intensities of the fluorocarbon (FC), F, and Balmer emissions were stronger in the CF4/D2 plasma in comparison with CF4/H2. From X-ray photoelectron spectra, a thinner FC layer with a lower F/C ratio was found in the surface of the sample etched by the CF4/H2 plasma. The plasma density, gas phase concentration and FC thickness were not responsible for the higher etch rate in the CF4/D2 plasma. The abstraction of H inside the SiN films by deuterium and, in turn, hydrogen dissociation from Si or N molecules, supported by the results of in situ monitoring of surface structure using attenuated total reflectance-Fourier transform infrared spectroscopy, resulted in the enhanced ER in the CF4/D2 plasma case. The findings imply that the hydrogen dissociation plays an important role in the etching of PECVD-prepared SiN films when the hydrogen concentration of SiN is higher. For the films etched with the CF4/H2 at −20 °C, the increase in ER was attributed to a thinner FC layer and surface reactions. On the contrary, in the CF4/D2 case the dependence of ER on substrate temperature was the consequence of the factors which include the FC layer thickness (diffusion length) and the atomic mobility of the etchants (thermal activation reaction).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Plasma Diagnostics and Applications · Semiconductor materials and devices · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Low-Temperature Plasma Sciences, Nagoya University, Nagoya 464-8603, Japan

References (54)

Show source-provided references
1. Review-Silicon nitride and silicon nitride-rich thin films technologies: State-of-the-art processing technologies, properties, and applications10.1149/2162-8777/aba447 ↗
2. The role of plasma chemistry on functional silicon nitride film properties deposited at low-temperature by mixing two frequency powers using PECVD10.1039/C6CP00986G ↗
3. Formation of SixNy(H) and C:N:H layers by plasma-assisted chemical vapor deposition method10.1016/j.tsf.2016.01.016 ↗
4. Physical-electrical properties of silicon nitride deposited by PECVD on III-V semiconductors10.1149/1.2086326 ↗
5. The structural and optical properties of a-SiNx:H prepared by plasma enhanced chemical vapor deposition10.1063/1.351992 ↗
6. Reactive ion etching of PECVD amorphous silicon and silicon nitride thin films with fluorocarbon gases10.1149/1.2086638 ↗
7. Selective reactive ion etching of silicon nitride over silicon using CHF3 with N2 addition10.1116/1.588124 ↗
8. Selective reactive ion etching of PECVD silicon nitride over amorphous silicon in CF4/H2 and nitrogen containing CF4/H2 plasma gas mixtures10.1016/0038-1101(95)00109-7 ↗
9. SiN etching characteristics of Ar/CH3F/O2 plasma and dependence on SiN film density10.7567/JJAP.55.086502 ↗
10. Hydrogen effects in hydrofluorocarbon plasma etching of silicon nitride: Beam study with CF+, CF2+, CHF2+, and CH2F+ ions10.1116/1.3610981 ↗
11. Silicon nitride etching performance of CH2F2 plasma diluted with argon or kypton10.7567/JJAP.54.040303 ↗
12. Atomic layer etching of Si3N4 with high selectivity to SiO2 and poly-Si10.1116/6.0001179 ↗
13. Electronic properties and primarily dissociation channels of fluoroethane compounds10.7567/1347-4065/ab09ca ↗
14. Selective etching of SiN against SiO2 and poly-Si films in hydrofluoroethane chemistry with a mixture of CH2FCHF2, O2, and Ar10.1016/j.apsusc.2020.148439 ↗
15. Low-temperature reactive ion etching and microwave plasma etching of silicon10.1063/1.99382 ↗
16. Low-temperature dry etching of Tungsten, dielectric, and trilevel resist layers on GaAs10.1007/BF01570209 ↗
17. The reaction of fluorine atoms with silicon10.1063/1.329098 ↗
18. Cryogenic etching of silicon with SF6 inductively coupled plasmas: A combined modelling and experimental study10.1088/0022-3727/48/15/155204 ↗
19. SiO2 tapered etching employing magnetron discharge of fluorocarbon gas10.1143/JJAP.31.405 ↗
20. Low temperature plasma etching for Si3N4 waveguide applications10.1116/1.2836424 ↗
21. Effects of hydrogen content in films on the etching of LPCVD and PECVD SiN films using CF4/H2 plasma at different substrate temperatures10.1002/ppap.202100078 ↗
22. Influence of substrate temperatures on etch rates of PECVD-SiN thin films with a CF4/H2 plasma10.1016/j.apsusc.2020.148550 ↗
23. Hsiao, S.N., Nguyen, T.-T.-N., Tsutsumi, T., Ishikawa, K., Sekine, M., and Hori, M. (2020, January 15–16). Etching characteristics of PECVD-prepared SiN films with CF4/D2 and CF4/H2 plasmas at different temperatures. Proceedings of the 2020 International Symposium on Semiconductor Manufacturing (ISSM), Tokyo, Japan.10.1109/ISSM51728.2020.9377537 ↗
24. Plasma absorption probe for measuring electron density in an environment soiled with processing plasmas10.1143/JJAP.38.5262 ↗
25. Rapid electron density observed by surface-wave probe in afterglow fluorocarbon-based plasma10.7567/JJAP.55.080309 ↗
26. Recent innovations in microwave probes for reactive plasma diagnostics10.7567/1347-4065/ab1a43 ↗
27. Elastic and Inelastic collision cross sections in hydrogen and deuterium from transport coefficients10.1103/PhysRev.131.2115 ↗
28. Isotope effect between hydrogen and deuterium microwave plasmas on chemical vapor deposition homoepitaxial diamond growth10.1063/1.2727380 ↗
29. Briggs, D., and Seah, M.P. (1990). Practical Surface Analysis vol. 1: Auger and X-ray Photoelectron Spectroscopy, John Wiley & Sons.
30. Watts, J.F., and Wolstenholme, J. (2003). An Introduction to Surface Analysis by XPS and AES, Wiley.10.1002/0470867930 ↗
31. Fluorocarbon based atomic layer etching of Si3N4 and etching selectivity of SiO2 over Si3N410.1116/1.4954961 ↗
32. (2010). NIST Electron Inelastic-Mean-Free-Path Database, Standard Reference Data Program, Version 1.2, The National Institute of Standards and Technology (NIST).
33. Characterizing fluorocarbon assisted atomic layer etching of Si using cyclic Ar/C4F8 and Ar/CHF3 plasma10.1063/1.4961458 ↗
34. Comparison of pulsed and continuous-wave deposition of thin films from saturated fluorocarbon/H2 inductively coupled rf plasmas10.1021/cm960388q ↗
35. Role of surface temperature in fluorocarbon plasma-surface interactions10.1116/1.4729445 ↗
36. CF2 production and loss mechanisms in fluorocarbon discharges: Fluorine-poor conditions and polymerization10.1063/1.370296 ↗
37. Selective and deep plasma etching of SiO2: Comparison between different fluorocarbon gases (CF4, C2F6, CHF3) mixed with CH4 or H2 and influence of the residence time10.1116/1.1495502 ↗
38. Influence of hydrogen in silicon nitride films on the surface reactions during hydrofluorocarbon plasma etching10.1116/1.5001034 ↗
39. Rate constants for reactions of atomic fluorine with hydrogen and deuterium10.1007/BF00925157 ↗
40. Reaction cross sections and rate constants for F + H2 (D2) → HF(DF) + H(D) reactions from quasiclassical trajectory calculations on a potential energy surface10.1016/0009-2614(96)00316-8 ↗
41. Silicon etching mechanisms in a CF4/H2 glow discharge10.1063/1.339766 ↗
42. Control of surface reactions in high-performance SiO2 etching10.1116/1.1305807 ↗
43. Role of fluorocarbon film formation in the etching of silicon, silicon dioxide, silicon nitride, and amorphous hydrogenated silicon carbide10.1116/1.1626642 ↗
44. Enhanced dry etching of silicon with deuterium plasma10.1116/1.589160 ↗
45. Free energy model for bonding in a-Si alloys10.1016/S0022-3093(05)80258-3 ↗
46. Etching of Si3N4 by SF6/H2 and SF6/D2 plasmas10.1088/1742-6596/1697/1/012222 ↗
47. Perspective on fluorocarbon chemistry10.1021/jo0302556 ↗
48. Abstraction of atomic hydrogen by atomic deuterium from an amorphous hydrogenated silicon surface10.1063/1.1522400 ↗
49. Combinatorial survey of fluorinated plasma etching in the silicon-oxygen-carbon-nitrogen-hydrogen system10.1116/1.4964648 ↗
50. Reaction mechanism for fluorine etching of silicon10.1103/PhysRevB.36.9805 ↗
51. Photoionization of HCN: The electron affinity and heat of formation of CN10.1063/1.1671233 ↗
52. Plasma cryogenic etching of silicon: From the early days to today’s advanced technologies10.1088/0022-3727/47/12/123001 ↗
53. Fluorine-Silicon surface reactions during cryogenic and near room temperature etching10.1021/jp5108872 ↗
54. Mehrer, H. (2007). Diffusion in Solids: Fundamental, Methods, Materials, Diffusion-Controlled Processes, Springer.10.1007/978-3-540-71488-0 ↗