journal article·2026-03-31Open access

Investigation of CaZrO 3− x S x oxysulfide perovskite thin films grown by pulsed laser deposition

Hussain Althubyani, Daniel Stoeffler, Jérémy Bartringer, Stéphane Roques, Dris Ihiawakrim, Aziz Dinia, Thomas Fix

Journal of Physics: Energy· Volume 8· Issue 1

Abstract

Abstract We aim to identify alternative perovskite candidates for optoelectronic and photovoltaic applications that would combine several key requirements, such as stability, low toxicity, scalability, abundance, and efficacy. Among the most promising candidates are chalcogenide and oxysulfide perovskites, such as CaZrS 3 or CaZrO 3− x S x . While several methods to grow such materials involve post-sulfurization of precursors, in this work, we investigate the direct growth of CaZrO 3− x S x films by pulsed laser deposition. Growth conditions were explored on various substrates, including LaAlO 3 (001) (LAO), SrTiO 3 (001) (STO), SrTiO 3 :Nb(001) (Nb:STO), YAlO 3 (001) (YAO), and Al 2 O 3 (1–102) (ALO), over a temperature range from 600 °C to 900 °C. The resulting films were systematically characterized in terms of their structural, optical and electrical properties, as well as their semiconducting energy levels. The most promising results were obtained on LAO substrates at a growth temperature of 800 °C, yielding improved crystallinity and a bandgap of 2.4 eV, the lowest among the investigated films. This film also exhibited a very high and promising surface photovoltage signal, reaching 900 mV at 0.2 sun. However, to further improve the material’s suitability for photovoltaic integration, particularly in single junction or tandem architectures, additional bandgap tuning via doping may be necessary to enhance electrical transport and broaden absorption.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Perovskite Materials and Applications · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Chalcogenide materials and derivatives for photovoltaic applications10.1002/ente.201900819 ↗
2. The role of dimensionality on the optoelectronic properties of oxide and halide perovskites, and their halide derivatives10.1002/aenm.202100499 ↗
3. State of the art and prospects for halide perovskite nanocrystals10.1021/acsnano.0c08903 ↗
4. Extraordinary strong band-edge absorption in distorted chalcogenide perovskites10.1002/solr.201900555 ↗
5. Are chalcogenide perovskites an emerging class of semiconductors for optoelectronic properties and solar cell?10.1021/acs.chemmater.8b04178 ↗
6. Unveiling the prospect of a novel chemical route for synthesizing solution-processed CdS/CdTe thin-film solar cells10.1016/j.egyr.2021.03.031 ↗
7. Chalcogenide perovskite BaZrS3 thin-film electronic and optoelectronic devices by low temperature processing10.1016/j.nanoen.2021.105959 ↗
8. Impact of sulfurization temperature on the formation and properties of chalcogenide perovskites10.3390/molecules30061198 ↗
9. Understanding the growth mechanism of BaZrS3 chalcogenide perovskite thin films from sulfurized oxide precursors10.1088/2515-7655/aca9fe ↗
10. Computational study of the fundamental properties of Zr-based chalcogenide perovskites for optoelectronics10.1039/D3CP01522J ↗
11. Theoretical investigation of the structural, electronic and thermodynamic properties of cubic and orthorhombic XZrS 3 (X=Ba,Sr,Ca) compounds10.1007/s10825-019-01317-3 ↗
12. Study of the perovskites CaZrO3-xSx (x=0, 1, 2 and 3) for photovoltaic applications10.1016/j.ssc.2023.115105 ↗
13. A DFT investigation of Ti-substituted CaZrS3 for tailored photovoltaic properties10.1016/j.commatsci.2024.113286 ↗
14. Anisotropic chalcogenide perovskite CaZrS3: a promising thermoelectric material10.1021/acs.jpcc.2c02286 ↗
15. Exploring the potential of non-toxic chalcogenide based perovskite solar cells: performance analysis and insights10.1016/j.inoche.2025.113923 ↗
16. The study of structural, electronic, and optical properties of Ti- substituted CaZr1-xTix S3 (x=0.00, 0.25, 0.50, 0.75, and 1.00) for optoelectronic applications: using GGA and GGA+U10.1016/j.ssc.2023.115255 ↗
17. The synthesis and crystal structures of some alkaline earth titanium and zirconium sulfides10.1107/s0365110x6300030x ↗
18. Chalcogenide perovskites—an emerging class of ionic semiconductors10.1016/j.nanoen.2016.02.020 ↗
19. Insight into the physical properties of the chalcogenide XZrS3 (X = Ca, Ba) perovskites: a first-principles computation10.1007/s11664-024-11120-x ↗
20. Enhanced performance of CaZrS3-based chalcogenide perovskite solar cells (CPSC): a theoretical study on optimization of hole transport material10.35848/1347-4065/ad9977 ↗
21. Growth of cubic InN on r-plane sapphire10.1063/1.1622985 ↗
22. Insights on CaTiS3 films grown by pulsed laser deposition10.1016/j.jallcom.2023.171272 ↗
23. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
24. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
25. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
26. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
27. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
28. Thermal expansion of LaAlO 3 and “La,Sr…”Al,Ta…O 3, substrate materials for superconducting thin-film device applications
29. Eyring · 2009
30. Room-temperature ferroelectricity in strained SrTiO310.1038/nature02773 ↗
31. Complex oxide thin films: a review on pulsed laser epitaxy growth10.1016/j.cap.2024.09.001 ↗
32. Epitaxial strain dependent electrocatalytic activity in CaRuO3 thin films10.1063/5.0020934 ↗
33. Design and optimization of a multi-temperature zone heater for enhanced substrate temperature uniformity in large-sized molecular beam epitaxy systems10.1016/j.applthermaleng.2025.126864 ↗
34. BaZrS3 chalcogenide perovskite thin films by H2S sulfurization of oxide precursors10.1021/acs.jpclett.1c00177 ↗
35. Uncovering the effect of lattice strain and oxygen deficiency on electrocatalytic activity of perovskite cobaltite thin films10.1002/advs.201801898 ↗
36. Chalcogenide perovskite BaZrS3: thin film growth by sputtering and rapid thermal processing10.1021/acsaem.9b02428 ↗
37. Interplay between growth mechanism, materials chemistry, and band gap characteristics in sputtered thin films of chalcogenide perovskite BaZrS310.1021/acsaem.3c02075 ↗
38. Crystal engineering for low defect density and high efficiency hybrid chemical vapor deposition grown perovskite solar cells10.1021/acsami.6b07513 ↗
39. Thermal annealing effects on the physical properties of GaAsBi/GaAs/GaAs:Si structure10.1007/s43994-022-00023-4 ↗
40. Photocatalytic performances of dip-coated Ag doped TiO2 thin films10.24425/amm.2024.150919 ↗
41. Bandgap tuning in BaZrS3 perovskite thin films10.1021/acsaelm.1c00575 ↗
42. Sensitive bandgap reduction of SrTiO3 through incorporation of sulfur using ion implantation10.1002/solr.202400237 ↗
43. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
44. Deposition of CaZrO3 thin films by EB-PVD: effects of substrate on the composition, the structure, the morphology and the optical properties10.1016/j.surfin.2021.101259 ↗
45. Influence of sodium concentration on the optoelectronic properties of silicon clathrate films10.1021/acsaem.4c01514 ↗
46. Large surface photovoltage of WS2/MoS2and MoS2/WS2 Vertical hetero-bilayers10.1021/acsaelm.1c00192 ↗
47. Enhancing morphological and optoelectronic properties of silicon clathrate films through thermal press annealing and SF6 treatment10.1021/acsaem.4c02915 ↗
48. Alloying and defect control within chalcogenide perovskites for optimized photovoltaic application10.1021/acs.chemmater.5b04213 ↗