Source abstract
Abstract
High Resolution Image Download MS PowerPoint Slide The demand for versatile and sustainable energy materials is on the rise, given the importance of developing novel clean technologies for transition to a net zero economy. Here, we present the synthesis, characterization, and application of lignin-derived ordered mesoporous carbons with various pore sizes (from 5 to approximately 50 nm) as anodes in sodium-ion batteries. We have varied the pore size using self-synthesized PEO n - b -PHA m block copolymers with different PEO and PHA chain lengths, applying the “soft templating” approach to introduce isolated spherical pores of 20 to 50 nm in diameters. The pore structure was evaluated by transmission electron microscopy (TEM), nitrogen physisorption, and small-angle X-ray scattering (SAXS). We report the microstructure analysis of such mesoporous lignin-based carbons using Raman spectroscopy and wide-angle X-ray scattering (WAXS). In comparison with nontemplated carbon and carbons templated employing commercial Pluronic F-127 and PIB 50 - b -PEO 45, which created accessible channels and spherical pores up to approximately 10 nm in diameter, the carbon microstructure analysis revealed that templating with all applied polymers significantly impedes graphitization upon thermal treatment. Furthermore, the gained knowledge of similar carbon microstructures regardless of the type of template allowed the investigation of the influence of different pore morphologies in carbon applied as an anode material in sodium-ion batteries, supporting the previous theories in the literature that closed pores are beneficial for sodium storage while providing insights into the importance of pore size.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Institute of Physical Chemistry, Justus-Liebig University, Heinrich-Buff-Ring 17, D-35392 Giessen, Germany
Department of Chemical Engineering, South Kensington Campus, Imperial College London, SW7 2AZ London, U.K.
Center of Materials Research, Justus-Liebig University, Heinrich-Buff-Ring 16, D-35392 Giessen, Germany
Chemical Engineering Research Center, State Key Laboratory of Chemical Engineering, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
Institute of Inorganic Chemistry, Graz University of Technology, Stremayrgasse 9, A-8010 Graz, Austria
Tohoku University Advanced Institute for Materials Research (AIMR), Chome-1-1 Katahira, Aoba Ward, Sendai, Miyagi 980-0812, Japan
Funding
Engineering and Physical Sciences Research Council · Royal Academy of Engineering · Fonds der Chemischen Industrie · China Scholarship Council