journal article·2026-05Open access

Surface chemistry of electrochromic MoO3-ZnO and MoO3 thin films deposited by DC reactive magnetron sputtering

A.V. Urizar-Torres, D. Bravo-Solano, E. Grajales-Martínez, J.R. Cisneros-de León, P.I. López-Carrasco, M. Pérez-González, M.A. Arvizu-Coyotzi, S.A. Tomás

Abstract

This study investigates the influence of zinc incorporation on the electrochromic performance of MoO 3 thin films, aiming to enhance their applicability in smart window technologies. MoO 3 and MoO 3 -ZnO thin films were deposited onto ITO-coated glass substrates via DC reactive magnetron sputtering, using either pure Mo or Mo-Zn alloy targets. Two Ar/O 2 gas flow ratios (94 %/6 % and 82 %/18 %) were employed, and deposition parameters were optimized to produce high-quality films. Electrochromic behavior was characterized using cyclic voltammetry and UV-Vis spectroscopy in a lithium perchlorate/propylene carbonate electrolyte. Comparative analysis showed that MoO 3 -ZnO films deposited under an Ar/O 2 gas flow ratio of 82/18, with 60 W power and a working pressure of 10 mTorr, exhibited superior optical modulation, enhanced coloration efficiency, and improved electrochemical stability. These enhancements are associated with the presence of Zn, which may contribute to improved structural stability and reduced undesirable redox processes during lithium intercalation. Structural analyses using XRD confirm the amorphous nature of the films, while Raman spectroscopy revealed that the incorporation of Zn induces a relaxation in the strength constants of the O-Mo-O bridging bonds, favoring a more flexible and elastic network. This, complemented by a homogeneous and porous surface morphology observed by SEM, guarantees greater reversibility during ionic intercalation cycles, overcoming the limitations of pure MoO 3 . X-ray photoelectron spectroscopy revealed that films deposited with a 94/6 Ar/O 2 ratio exhibited a mixed distribution of Mo oxidation states, including Mo 6+ , Mo 5+ , and Mo 4+ . In contrast, films deposited with 82/18 Ar/O 2 showed a predominantly Mo 6+ state, indicating a more fully oxidized and chemically stable composition. Overall, this work highlights the potential of Zn doping as a viable strategy to improve the electrochromic performance and long-term stability of MoO 3 -based materials for energy-efficient smart applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Transition Metal Oxide Nanomaterials · Chemical and Physical Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
2. Monk · 2007
3. Molybdenum oxides – from fundamentals to functionality10.1002/adma.201701619 ↗
4. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these10.1039/B612174H ↗
5. Electrochromic materials10.1146/annurev-matsci-062910-100344 ↗
6. Electrochemical lithium incorporation into WO3 and MoO3 thin films10.1016/0167-2738(82)90075-3 ↗
7. Electrochromic properties of MoO3 thin films derived by a sol–gel process10.1007/s10971-009-2055-6 ↗
8. The mechanism of trapped ions eroding the electrochromic performances of WO3 thin films10.20964/2018.08.18 ↗
9. Transport properties of lithium-intercalated MoO310.1016/0167-2738(94)90245-3 ↗
10. Electrochromic W1– x – y Ti x Mo y O3 thin films made by sputter deposition: large optical modulation, good cycling durability, and approximate color neutrality10.1021/acs.chemmater.6b05198 ↗
11. Experimental and theoretical studies of Zn-Doped MoO3 hierarchical microflower with excellent sensing performances to carbon monoxide10.1016/j.ceramint.2020.08.096 ↗
12. Structural, morphological, optical and electrochromic properties of Ti-Doped MoO3 thin films10.1016/j.solmat.2008.09.025 ↗
13. A comprehensive review of ZnO materials and devices10.1063/1.1992666 ↗
14. Spectroscopic analysis, structural, microstructural, optical and electrical properties of Zn-Doped In2O3 thin films10.1016/j.saa.2013.11.008 ↗
15. Structural and physical properties of transparent conducting, amorphous Zn-Doped SnO2 films10.1063/1.4861378 ↗
16. Rejuvenation of degraded electrochromic MoO3 thin films made by DC magnetron sputtering: preliminary results10.1088/1742-6596/764/1/012009 ↗
17. Optical, structural and electrochromic properties of sputter- deposited W-Mo oxide thin films10.1088/1742-6596/764/1/012010 ↗
18. Effect of oxygen partial pressure on the growth of molybdenum trioxide thin films10.1016/j.matpr.2019.10.140 ↗
19. Thermal stability of amorphous molybdenum trioxide films prepared at different oxygen partial pressures by reactive DC magnetron sputtering10.1016/j.vacuum.2006.08.006 ↗
20. Hüfner · 2003 · vol. 3
21. Van der Heide · 2012
22. Effect of the indium myristate precursor concentration on the structural, optical, chemical surface, and electronic properties of InP quantum dots passivated with ZnS10.1007/s10854-019-00783-6 ↗
23. Surface chemistry of TiO2-ZnO thin films doped with Ag. Its role on the photocatalytic degradation of methylene blue10.1016/j.cattod.2019.08.009 ↗
24. Orthorhombic MoO3 nanobelts based NO2 gas sensor10.1016/j.apsusc.2017.02.055 ↗
25. Construction of ZnO/TiO2 photonic crystal heterostructures for enhanced photocatalytic properties10.1016/j.apcatb.2015.01.001 ↗
26. Enhanced photocatalytic activity of TiO2-ZnO thin films deposited by Dc reactive magnetron sputtering10.1016/j.ceramint.2017.04.016 ↗
27. Structural and XPS studies of PSi/TiO2 nanocomposites prepared by ALD and Ag-Assisted chemical etching10.1016/j.apsusc.2015.04.172 ↗
28. Enhanced photocatalytic activity of amorphous MoO3 thin films deposited by Rf reactive magnetron sputtering10.1016/j.cattod.2018.04.065 ↗
29. Characterization and stability of electrochromic MoO3 thin films prepared by electrodeposition10.1149/1.2050004 ↗
30. Granqvist · 1995
31. Structure evolution in reactively sputtered molybdenum oxide thin films10.1016/j.vacuum.2016.07.002 ↗
32. Raman spectroscopy of molybdenum oxides10.1039/b107046k ↗
33. Proton storage in metallic H1.75 MoO3 nanobelts through the grotthuss mechanism10.1021/jacs.2c03844 ↗
34. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
35. The evolution of the Mo5+ oxidation state in the thermochromic effect of MoO3 thin films deposited by Rf magnetron sputtering10.1016/j.jallcom.2017.06.149 ↗
36. Chemical shifts of auger lines, and the auger parameter10.1039/dc9756000291 ↗
37. Initial and final state effects in the ESCA spectra of cadmium and silver oxides10.1063/1.435347 ↗
38. The auger parameter, its utility and advantages: a review10.1016/0368-2048(88)85018-7 ↗
39. Analysis on binding energy and auger parameter for estimating size and stoichiometry of ZnO nanorods
40. X-Ray photoelectron spectroscopy and auger electron spectroscopy studies of Al-Doped ZnO films10.1016/S0169-4332(99)00601-7 ↗
41. Electrochromic tungsten oxide films: review of progress 1993–199810.1016/S0927-0248(99)00088-4 ↗
42. Auger parameter measurements of zinc compounds relevant to zinc transport in the environment10.1002/sia.740140115 ↗
43. Improved hydrogen production from water splitting using TiO2–ZnO mixed oxides photocatalysts
44. Optical, structural, and morphological properties of photocatalytic TiO2–ZnO thin films synthesized by the Sol–Gel process10.1016/j.tsf.2015.04.073 ↗
45. Raman spectroscopic studies of electrochromic a-MoO3 thin films10.1016/S0167-2738(01)01035-9 ↗
46. Study of the photochromic properties of amorphous MoO3 films using Raman microscopy10.1021/j100044a028 ↗
47. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
48. Influence of sputtering power on the physical properties of magnetron sputtered molybdenum oxide films10.1007/s10854-009-9867-6 ↗
49. Thermo-, Photo-, and electrochromic response to working pressure variation in RF reactive magnetron sputtering”10.1007/s10854-018-9101-5 ↗
50. The preparation and investigation of all thin film electrochromic devices based on reactively sputtered MoO3 thin films10.1016/j.mssp.2021.105686 ↗
51. Synthesis and electrochromic properties of molybdenum oxide films10.1016/j.surfcoat.2018.12.028 ↗
52. Improved adsorption and photocatalytic removal of methylene blue by MoO3 thin films: role of the sputtering power, film thickness, and sputtering working pressure10.1016/j.cattod.2019.06.003 ↗
53. Electrochromic properties of undoped and Ti-Doped MoO3 converted from vertical nanowall MoS2 thin films10.1016/j.electacta.2024.144638 ↗
54. Advanced dual‐band smart windows: inorganic all‐solid‐state electrochromic devices for selective visible and near‐infrared modulation
55. A dual-responsive smart window based on inorganic all-solid-state Electro- and photochromic device10.1016/j.nanoen.2024.109352 ↗
56. Preparation and electrochromic properties of NiO and ZnO-Doped NiO thin films
57. Molybdenum‐doped nickel oxide as an advanced ion storage layer for highly stable and durable flexible electrochromic devices10.1002/adom.202500934 ↗
58. Mixed molybdenum–tungsten oxide as dual‐band, VIS–NIR selective electrochromic material10.1002/adom.202401995 ↗