Experimental Rig Design for the Development of Wheel-Type Caliper Sensor
Source abstract
Abstract
Abstract Geometric deformations, which represent a specific subset of pipeline anomalies characterized by shape irregularities rather than material loss or cracking, are among the most common types of anomalies in oil and natural gas pipelines. These deformations can weaken the structural integrity of pipelines, leading to explosions and leaks. For these reasons, pipelines should be inspected periodically against possible geometric deformations. The inspection is usually carried out with devices called smart pigs, which are equipped with a wheel-type caliper (CL) sensor. In this paper, an experimental rig for the development of a wheel-type CL sensor is designed and the mechanical, hardware, and software structures of the design are presented. On the proposed rig, the effect of the default angle of the CL inspection arm on the accuracy of sizing the height and length of convex/concave deformations has been experimentally investigated. The experimental results proved the theoretical hypothesis based on the angular change–spring force relationship, demonstrating that the default angle indirectly affects measurement performance through its influence on the spring force. Thus, increasing the default angle in the inspection of concave structures (up to 28% in height, 6% in length) and decreasing the default angle in the inspection of convex structures (up to 5% in height, 15% in length) increased the sizing performance regardless of the pigging speed. This study provides a reference for determining the appropriate CL arm posture for inspections to be carried out to characterize a specific geometric deformation type. It also guides the development of CL sensors by detailing the mechanical, hardware, and software structures of the experimental rig.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Structural Integrity and Reliability Analysis · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Li, W., Chen, G., Yin, X., Ge, J.: A feed-through ACFM probe with sensor array for pipe string cracks inspection. NDT E Int. 67, 17–23 (2014)10.1016/j.ndteint.2014.06.006 ↗
2. Tien, S.-W., Hwang, W.-T., Tsai, C.-H.: Study of a risk-based piping inspection guideline system. ISA Trans. 46, 119–126 (2007)10.1016/j.isatra.2006.06.006 ↗
3. Nee, L.V., Elamvazuthi, I., Ganesan, T., Khan, M.K.A.A., Parasuraman, S.: Development of a laboratory-scale pipeline inspection robot. Procedia Comput. Sci. 76, 9–14 (2015). https://doi.org/10.1016/j.procs.2015.12.26810.1016/j.procs.2015.12.268 ↗
4. Ellinger, M.: A history of in-line inspection tools. Insp. J. (2017). https://inspectioneering.com/journal/2017-04-27/6416/a-history-of-in-line-inspection-tools. Accessed 20 Dec 2025
5. Bernasconi, G., Giunta, G.: Acoustic detection and tracking of a pipeline inspection gauge. J. Pet. Sci. Eng. 194, 107549 (2020)10.1016/j.petrol.2020.107549 ↗
6. Bahadori, A., Vuthaluru, H.B.: Prediction of bulk modulus and volumetric expansion coefficient of water for leak tightness test of pipelines. Int. J. Press. Vessels Piping 86, 550–554 (2009)10.1016/j.ijpvp.2009.01.007 ↗
7. Coramik, M., Ege, Y.: Discontinuity inspection in pipelines: a comparison review. Measurement 111, 359–373 (2017)10.1016/j.measurement.2017.07.058 ↗
8. ROSEN Group Ltd.: In-line inspection services for deformation, geometry and mapping. https://www.rosen-group.com/en/expertise/product-and-service-finder/in-line-inspection-services-for-deformation-geometry-and-mapping. Accessed 20 Dec 2025
9. Melo, C., Dann, M.R., Hugo, R.J., Janeta, A.: Optimal locations for non-destructive inspections to verify direct assessment of internally corroded pipelines. Upstream Oil Gas Technol. 5, 100008 (2020)10.1016/j.upstre.2020.100008 ↗
10. Hirao, M., Ogi, H.: An SH-wave EMAT technique for gas pipeline inspection. NDT E Int. 32, 127–132 (1999). https://doi.org/10.1016/S0963-8695(98)00062-010.1016/S0963-8695(98)00062-0 ↗
11. Carvalho, A.A., Rebello, J.M.A., Sagrilo, L.V.S., Camerini, C.S., Miranda, I.V.J.: MFL signals and artificial neural networks applied to detection and classification of pipe weld defects. NDT E Int. 39, 661–667 (2006). https://doi.org/10.1016/j.ndteint.2006.04.00310.1016/j.ndteint.2006.04.003 ↗
12. Mazraeh, A.A., Ismail, F.B., Khaksar, W., Sahari, K.: Development of ultrasonic crack detection system on multi-diameter PIG robots. Procedia Comput. Sci. 105, 282–288 (2017). https://doi.org/10.1016/j.procs.2017.01.22310.1016/j.procs.2017.01.223 ↗
13. Piao, G., Guo, J., Hu, T., Deng, Y., Leung, H.: A novel pulsed eddy current method for high-speed pipeline inline inspection. Sens. Actuators, A 295, 244–258 (2019). https://doi.org/10.1016/j.sna.2019.05.02610.1016/j.sna.2019.05.026 ↗
14. Ramella, C., Canavese, G., Corbellini, S., Pirola, M., Cocuzza, M., Scaltrito, L., Ferrero, S., Pirri, C.F., Ghione, G., Rocca, V., Tasso, A., Lullo, A.D.: A novel smart caliper foam pig for low-cost pipeline inspection – Part B: field test and data processing. J. Pet. Sci. Eng. 133, 771–775 (2015). https://doi.org/10.1016/j.petrol.2014.09.03810.1016/j.petrol.2014.09.038 ↗
15. Clapham, L., Babbar, V., Marble, K., Rubinshteyn, A., Zarea, M.: Modelling magnetic flux leakage signals from dents. In: International pipeline conference. pp. 413–420 (2008). https://doi.org/10.1115/IPC2008-6427810.1115/IPC2008-64278 ↗
16. Zhao, X., Varma, V.K., Mei, G., Ayhan, B., Kwan, C.: In-line nondestructive inspection of mechanical dents on pipelines with guided shear horizontal wave electromagnetic acoustic transducers. J. Press. Vessel. Technol. 127, 304–309 (2005). https://doi.org/10.1115/1.199187910.1115/1.1991879 ↗
17. Daura, L.U., Tian, G., Yi, Q., Sophian, A.: Wireless power transfer-based eddy current non-destructive testing using a flexible printed coil array. Philos. Trans. R. Soc. A. 378, 20190579 (2020)10.1098/rsta.2019.0579 ↗
18. Ravanbod, H.: Application of neuro-fuzzy techniques in oil pipeline ultrasonic nondestructive testing. NDT and E Int. 38, 643–653 (2005)10.1016/j.ndteint.2005.03.001 ↗
19. Parlak, B.O., Yavasoglu, H.A.: A comprehensive analysis of in-line inspection tools and technologies for steel oil and gas pipelines. Sustainability 15, 2783 (2023). https://doi.org/10.3390/su1503278310.3390/su15032783 ↗
20. Parlak, B.O., Yavasoglu, H.A.: Geometric deformations in natural gas pipelines. In: Proceedings of the 3rd LA SDEWES Conference, Sao Paulo, Brazil, 24–28 July 2022
21. Gao, P., Duan, M., Gao, Q., Jia, X., Huang, J.: A prediction method for anchor penetration depth in clays. Ships Offshore Struct. 11, 782–789 (2016)10.1080/17445302.2015.1116244 ↗
22. Canavese, G., Scaltrito, L., Ferrero, S., Pirri, C.F., Cocuzza, M., Pirola, M., Corbellini, S., Ghione, G., Ramella, C., Verga, F., Tasso, A., Di Lullo, A.: A novel smart caliper foam pig for low-cost pipeline inspection-Part A: design and laboratory characterization. J. Pet. Sci. Eng. 127, 311–317 (2015). https://doi.org/10.1016/j.petrol.2015.01.00810.1016/j.petrol.2015.01.008 ↗
23. Wang, H., Zhu, X., Fang, Y., Zhang, H., Zhang, S.: Study on the detection arm accuracy of a leaf spring caliper for detecting internal convex defects in gas pipelines. Meas. Sci. Technol. 29, 85901 (2018)10.1088/1361-6501/aac753 ↗
24. Yue, C., Liu, S., Xiao, H., Zhu, X.: Experimental evaluation of multi-jointed soft detection arm of geometry inspection gauges for detecting internal convex defects in natural gas pipelines. Meas. Sci. Technol. 34, 15907 (2022)10.1088/1361-6501/ac9637 ↗
25. Li, X., Zhang, S., Liu, S., Jiao, Q., Dai, L.: An experimental evaluation of the probe dynamics as a probe pig inspects internal convex defects in oil and gas pipelines. Measurement 63, 49–60 (2015). https://doi.org/10.1016/j.measurement.2014.11.03010.1016/j.measurement.2014.11.030 ↗
26. Zhu, X., Jiao, Q., Li, X., Zhang, S., Liu, S.: Experimental research on the precision of wheeled caliper arm for measuring pipeline deformation. Measurement 127, 15–20 (2018). https://doi.org/10.1016/j.measurement.2018.05.09310.1016/j.measurement.2018.05.093 ↗
27. Paeper, S., Brown, B., Beuker, T.: Inline inspection of dents and corrosion using “High Quality” multi-purpose smart-pig inspection data. In: Volume 2: Integrity management; Poster session; Student paper competition. pp. 243–248. ASMEDC (2006). https://doi.org/10.1115/IPC2006-1015710.1115/IPC2006-10157 ↗
28. Kim, D.K., Cho, S.H., Park, S.S., Yoo, H.R., Rho, Y.W.: Design and implementation of 30„ geometry PIG. KSME Int. J. 17, 629–636 (2003). https://doi.org/10.1007/BF0298385810.1007/BF02983858 ↗
29. Kim, D.K., Cho, S.H., Park, S.S., Yoo, H.R., Rho, Y.W., Kho, Y.T., Park, G.S., Park, S.H.: Development of the caliper system for a geometry pig based on magnetic field analysis. KSME Int. J. 17, 1835–1843 (2003). https://doi.org/10.1007/BF0298242210.1007/BF02982422 ↗
30. Keshwani, R., Bhattacharya, S.: Ferrite cores as back yoke for enhancing hall sensor sensitivity in caliper tool for pipeline inspection. Sens. Rev. 29, 355–360 (2009). https://doi.org/10.1108/0260228091098661010.1108/02602280910986610 ↗
31. Xiaolong, L., Jinzhong, C., Yilai, M., Renbi, H., Shuanyi, L., Defu, Y.: Development of the detection arm of multichannel geometry pig of oil and gas pipeline. J. Phys. Conf. Ser. (2019). https://doi.org/10.1088/1742-6596/1237/4/04207410.1088/1742-6596/1237/4/042074 ↗
32. Li, X., Zhang, S., Liu, S., Zhu, X., Zhang, K.: Experimental study on the probe dynamic behaviour of feeler pigs in detecting internal corrosion in oil and gas pipelines. J. Nat. Gas Sci. Eng. 26, 229–239 (2015)10.1016/j.jngse.2015.06.033 ↗
33. Li, X., He, R., Meng, T., Zhang, S.: The evaluation of the bouncing model of caliper pig’s detection arm in subsea gas pipelines. Proc. Inst. Mech. Eng. M, J. Eng. Marit. Environ. 233, 735–744 (2019). https://doi.org/10.1177/147509021878337510.1177/1475090218783375 ↗
34. Rojas, P., Ulloa, H.N., Niño, Y.: Evolution and decay of gravity wavefields in weak-rotating environments: a laboratory study. Environ. Fluid Mech. 18, 1509–1531 (2018)10.1007/s10652-018-9609-5 ↗
35. Oguri, S., Choi, J., Kawai, M., Tajima, O.: Cryogenic cooling with cryocooler on a rotating system. Rev. Sci. Instrum. 84, 55116 (2013)10.1063/1.4807750 ↗
36. Lisicki, M., Adamowicz, Ł, Herczyński, A., Moffatt, H.K.: Viscous thread falling on a spinning surface. Symmetry 14, 1550 (2022)10.3390/sym14081550 ↗
37. Wang, W., Song, S., Zhang, S., Yu, D.: Impact analysis of pigging in shield segment of gas pipe. In: 2012 IEEE international conference on mechatronics and automation. pp. 203–207. IEEE (2012). https://doi.org/10.1109/ICMA.2012.628284210.1109/ICMA.2012.6282842 ↗
38. Malek, S.N.H., Zaki, W.S.W., Joret, A., Jamil, M.M.A.: Design and development of wireless stethoscope with data logging function. In: 2013 IEEE International conference on control system, computing and engineering. pp. 132–135. IEEE (2013). https://doi.org/10.1109/ICCSCE.2013.671994610.1109/ICCSCE.2013.6719946 ↗
39. Koch, A., Berthelot, A., Eckstein, B., Zweigle, O., Häussermann, K., Käppeler, U.-P., Tamke, A., Rajaie, H., Levi, P.: Advanced data logging in RoboCup. In: Autonome mobile systeme 2009: 21. Fachgespräch Karlsruhe, 3./4. Dezember 2009. pp. 1–8. Springer (2009). https://doi.org/10.1007/978-3-642-10284-4_110.1007/978-3-642-10284-4_1 ↗
40. Tahjib, A., Tanzin, H., Rahman, S.M.I., Islam, B.S., Azim, H.: Development of a solar powered electric vehicle based on tadpole design. In: 2021 2nd international conference on robotics, electrical and signal processing techniques (ICREST). pp. 206–210. IEEE (2021). https://doi.org/10.1109/ICREST51555.2021.933105210.1109/ICREST51555.2021.9331052 ↗
41. Zhu, X., Li, X., Zhao, C., Zhang, S., Liu, S.: Dynamic simulation and experimental research on the motion of odometer passing over the weld. J. Nat. Gas Sci. Eng. 30, 205–212 (2016)10.1016/j.jngse.2016.02.025 ↗
42. Kandroodi, M.R., Araabi, B.N., Bassiri, M.M., Ahmadabadi, M.N.: Estimation of depth and length of defects from magnetic flux leakage measurements: verification with simulations, experiments, and pigging data. IEEE Trans. Magn. 53, 1–10 (2016)10.1109/TMAG.2016.2631525 ↗